Search Results for "expert system source code" - Page 2

C# source code to get Optris MSPro, MSPlus IR thermometer measures, using the specific Usb/Serial cable (Silicom Lab CP210X USB to UART bridge in fact). For developper only : go to Files menu to get code. Maybe also for LS series. Say me back if it's OK.

The specifications and information for the 50 most common transistors used in small electronic circuits, robots, and prototyping.

This HTML utility allows the user to select standard color codes or surface mount numbers, then it identifies the resistor value. There is no need to memorize color codes or multipliers. An online working example of this program can be used at ZoomAviation.com/programs.

This is a C# library dedicated for using with a www.canusb.com device Full notes: See ReadMe.txt Summary The LAWICEL DLL is 'unmanaged code' and was not designed for use by C#/VB/Mono http://en.wikipedia.org/wiki/Managed_code If you wish to call 'unmanaged code' from 'managed code', you need to use a 'C# wrapper' to access the DLL. This wrapper uses 'PInvoke' (like peek/poke) to 'martial' calls from managed to unmanaged code. It sounds complicated, and it is. IT IS ALSO TOTALLY...

We provide MATLAB and Verilog Models of GeAr, and previously proposed adders (ACA-I, ETAII, ACA-II and GDA) at http://sourceforge.net/projects/approxadderlib/ GeAr is a low latency Generic Accuracy Configurable Adder that provides a higher number of potential configurations compared to state-of-the-art approximate adders, thus enabling a high degree of flexibility and trade-off between performance and output quality. These MATALB and Verilog models can allow software programmer as well as...

A Linux tool for the MikroElektronika (www.mikroe.com) AVRprog2 programming hardware. We have migrated to Github! https://github.com/avrprog2/avrprog2-code

Note: The project has moved to https://github.com/pyhys/minimalmodbus The files available here are very old, download from Github instead. MinimalModbus is an easy-to-use Python module for talking to instruments (slaves) from a computer (master) using the Modbus protocol, and is intended to be running on the master. Example code includes drivers for Eurotherm and Omega process controllers. The only dependence is the pySerial module (also pure Python). This software supports the ‘Modbus...

GCode sender for ramps and marlin firmware for CNC Milling Machine 3D preview RS232 and RS232 over TCP drivers Full GComands control, disable, replace, pause. Full machine control Remap XYZ coordinates GComands description After install select Help->Check for updates..

Firmware to run the TrendNET TEW-652BRP version 2.x wireless router in client mode. Based on GPL firmware provided by TrendNET and modified to change the operating mode of the router from Access Point to wireless client.

Firmware and schematic for a USB HID compatible remote control consumer device using an Atmel AVR Atmega8. No drivers are needed for WindowsXP / WMP10 / Vista / Windows 7. Press Play/Stop/Pause and control media player directly from your remote control.

This project provides a chip card interface device driver for the PC/SC Lite server deamon (pcscd). The driver provides a standard PC/SC interface to NFC devices supported by libnfc. Note, that this project is currently not actively developed. However, the code has been adopted by the libnfc-Team. See https://code.google.com/p/ifdnfc/source/checkout.

Schematics and micro-controller code for a version of the scoring apparatus used in competitive fencing and a compatible remote control.

The HDL Complexity Tool parses large complex hardware projects' source code to produce useful complexity results. GOALS: 1)Practical, effective and simple 2) Integrates with existing design flows 3) Used on real projects 4) Based on existing research

OpenVGA is an free and open FPGA-based implementation of a VGA compatible graphics adapter, and utilising low-cost hardware. The project includes the PCB schematic and artwork, Verilog HDL, firmware assembly code, and driver source code.

New programming language for SPS devices like Amtel Controller . The basic element of this language will be small Moduls of Code which work parallel (Multitasking). A Module can work indepent or with addiction to other Moduls.

The Make Controller is an open microcontroller platform for Makers of all kinds, by MakingThings. Note - current code is hosted on the MakingThings site at https://www.makingthings.com/svn

This code programmed into an AVR microcontroller wired to the receiver's JTAG port allows loading unsigned code on SMP8634 based media receivers enabling you to boot other operating systems e.g. Linux. (Only x30Xt receivers are currently supported)

This is an opensource project for the calculation of the mathematical constant Pi. If you are a mathematician or programer please contribute ideas or code for this project. Non professionals are also welcome to contribute.

This Java program calculates the SPBRG value for a given baud rate (Baudrate) and clock frequency. It comes with a graphical interface and a simple value interpretation guide. A Java Webstart file (.jnlp) is provided.

This is a simulation of an open CPU, called 67-80-85. It tries to implement a simple, efficient CPU. It includes the simulator, an assembler, a sample code for a boot loader (ROM), a microkernel prototype and tests. - "The 3-legged shinning steel horse

WIFI-BOX Firmware for WRT54G(s), Hacked with Linksys's GPL source code, Add more futures for this Wireless Router... Updated: Now support for GS version and Asus WL-500GS...

Help port the tulip driver from free/net/openbsd to Darwin OS. So far the driver is written to the ADMtek 985 clone chipset and the PNIC 82c169 chipset. Due to IOKit's object-oriented design, the code can be easily subclassed to support new chipsets.

DVD/CD UDF disc drive tools, esp. for the Iomega RRD (aka Iomega REV) drive. Usability patches for UDF mkfs and fsck. Commentary for the lk MMC and UDF source code. cvs co tarballs for firewalls that defeat CVS. Links, FAQ's, troubleshooting hints.

This software is the going to be used in a small office refrigerator to controll the thermostat. Currently the code is written for the PIC16F84 in assembler. The code is fully compilable in MPLAB.

This project implements a reduced instruction set (RISC) CPU in VHDL. It was designed for the Altera Flex10k20 chip, but the VHDL code should port to any compatable chip. The instruction set is extensive, and the design is easily extendable to 16 bits.