Search Results for "xampp x86 linux"

SeaBreeze is a device driver library that provides an interface to select Ocean Optics spectrometers. It is written in C/C++ and builds and runs on Windows (XP/7/8), MacOSX, and Linux (x86/x64/ARM).

Identify sizes of memory modules installed on a Solaris, Linux, FreeBSD or HP-UX workstation or server. memconf reports the size of each SIMM/DIMM memory module installed in a system. It also reports the system type and any empty memory sockets. In verbose mode, it also reports the following information if available: - banner name, model and CPU/system frequencies - address range and bank numbers for each module

Simple program that displays information about CUDA-enabled devices. The program is equipped with GPU performance test.

libcpuid provides CPU identification for the x86. It wraps the CPUID and RDTSC instructions in a portable manner and provides a lot of technical info about the processor, such as vendor, core codename, features/instruction sets, cache sizes, and more.

LinK+ IDE is a simple IDE for Linux Kernel Developers and Lovers. It is based on Eclipse IDE customized for Linux kernel programming. It reduces the development time and executes code in an elegant fashion. This IDE supports Linux kernel configuration, compilation & emulation, system call development and device driver development. LinK+ IDE includes various templates in the category of character, block and network device driver subsystems for device driver development. It includes...

OpenSOC86 is an open implementation of the x86 architecture in Verilog. The current version only implements the 16-bit part (real mode). The processor is a pipelined architecture clocked at 100 MHz in a Cyclone II speed grade -6. Therefore it can be seen as similar to a 486 in real mode. Several peripherals are also implemented in a somewhat minimalistic way, but enough to be able to boot an IBM PCXT compatible bios and MSDOS 6.22. The current implementation is only proven to boot the...

Library for handling XBee / XBee-PRO RF modules. The library is written in C and supports the following platforms: Linux (x86, MIPSel), Windows (x86), AT91 SAM7 microcontrollers.

Dioscuri is an x86 computer hardware emulator written in Java. It is designed by the digital preservation community to make sure that documents and programs from the past can still be accessed in the future. Dioscuri is durable and component-based.

This research project is a port of the Rice University's Superpages FreeBSD prototype to the Linux 2.6 kernel for IA64, x86-64, and x86-32 processor architectures. See the wiki section for more information.

CPU Informer - CPU recognition program. A very useful tool for CPU detection. It recognizez all types of x86 CPU's including new Intel and AMD Dual Core CPUs. Also CPU Informer can work with most popular LPC SuperIO sensors.

The first true nanokernel for x86 that gives a unix prompt on a real bourne shell in respect of all security rules!

SP Tools implements the wire interface to ReefNet's Sensus Pro divelogger. It allows dive data to be downloaded, and the sampling rate to be changed. Originally called SP Tools for Linux and aimed at x86, it now supports Solaris SPARC too.

lxbios is a utility for reading/writing LinuxBIOS parameters and displaying information from the LinuxBIOS table. It is intended for x86-based Linux systems (either 32-bit or 64-bit) that use LinuxBIOS.

The GDAC (Generic Device Access and Control) framework is an extensible multithreaded cross platform (Linux (x86,VME)/Windows) C++ device control environment. It typically will be used as the basis for custom OPC servers or front-end control software.