Search Results for "s-tools"
Sort By:
Showing 113 open source projects for "s-tools"
View related business solutions-
Try Google Cloud Risk-Free With $300 in CreditUse your credit across every product. Compute, storage, AI, analytics. When it runs out, 20+ products stay free. You only pay when you choose to.
-
MongoDB Atlas runs apps anywhereMongoDB Atlas gives you the freedom to build and run modern applications anywhere—across AWS, Azure, and Google Cloud. With global availability in over 115 regions, Atlas lets you deploy close to your users, meet compliance needs, and scale with confidence across any geography.
-
1
S.M.A.R.T. Monitoring Tools
Disk Inspection and Monitoring
smartmontools contains utility programs (smartctl, smartd) to control/monitor storage systems using the Self-Monitoring, Analysis and Reporting Technology System (S.M.A.R.T.) built into most modern ATA and SCSI disks. It is derived from smartsuite. -
2
Lenovo Legion Linux Support
Driver and tools for controlling Lenovo Legion laptops in Linux
Lenovo Legion Linux (LLL) brings additional drivers and tools for Lenovo Legion series laptops to Linux. It is the alternative to Lenovo Vantage or Legion Zone (both Windows only). It allows you to control features like the fan curve, power mode, power limits, rapid charging, and more. This has been achieved through reverse engineering and disassembling the ACPI firmware, as well as the firmware and memory of the embedded controller (EC). -
3
AWS EC2 FPGA
AWS EC2 FPGA hardware and software development Kit
AWS EC2 FPGA Development Kit is a set of development and runtime tools to develop, simulate, debug, compile and run hardware-accelerated applications on Amazon EC2 F1 instances. It is distributed between this GitHub repository and FPGA Developer AMI - Centos/AL2 provided by AWS with no cost of development tools. After creating an FPGA design (also called CL - Custom logic), developers can create an Amazon FPGA Image (AFI) and easily deploy it to an F1 instance. -
4
TuxClocker
Qt overclocking tool for GNU/Linux
...TuxClocker provides a user-friendly GUI atop lower-level interfaces, making it easier to control clock speeds, fan behavior, and other tuning parameters without resorting exclusively to command-line tools. It is especially useful for Linux enthusiasts and power users looking to optimize performance for gaming, content creation, or benchmarking. The project also has a companion command-line version (tuxclocker-cli), broadening usability scenarios for scripting or headless setups. While the features and hardware support may vary by distribution and driver stack, TuxClocker fills a niche for integrated Linux performance tuning with a polished front end. -
Add Two Lines of Code. Get Full APM.Works out of the box for Rails, Django, Express, Phoenix, and more. Monitoring exceptions and performance in no time.
-
5
This project delivers Linux support (USB driver and Tools) for a Digital Signal Processor (DSP) cards of the Signal Ranger series, see http://www.softdb.com/product_dsp.shtml for details) connected to a Linux host via USB.
-
6
Armadeus is an OpenSource Hardware and Software project based on an ARM core (Freescale i.MX) and Linux. You can consult our wiki at http://www.armadeus.org to join our non profit association or our commercial website at http://www.armadeus.com .
-
7
BRL-CAD
Open Source Solid Modeling CAD
BRL-CAD is a powerful cross-platform constructive solid geometry solid modeling system that includes an interactive geometry editor, ray-tracing for rendering & geometric analyses, network distributed framebuffer support, image & signal-processing tools. -
8
JxMake
A Java-based cross-platform build system.
JxMake is a Java-based, cross-platform build system primarily inspired by the syntax and features of GNU Make, Perforce Jam, and CMake. In addition, JxMake provides several capabilities not typically found in other console-based build systems, including a built-in lightweight GUI, serial console, serial plotter, multi-MCU in-system programmer, and more. Currently, JxMake's loadable libraries (build scripts) are primarily designed for non-OS MCU systems and experimental use. Full... -
9
Zabbix-HDD
Zabbix extension that reports various HDD status using various tools
This extension uses not only smartctl (smartmontools) but other available tools to determine the existance of an HDD and as much as possible of its status. As a Zabbix "auto-discovery" process, these results can reflect changes in available HDD in near-to-real-time. -
Forever Free Full-Stack Observability | Grafana CloudBuilt on open standards like Prometheus and OpenTelemetry, Grafana Cloud includes Kubernetes Monitoring, Application Observability, Incident Response, plus the AI-powered Grafana Assistant. Get started with our generous free tier today.
-
10
kmiwaveram
"KMI Wave-RAM"
"KMI Wave-RAM" ("kmiwaveram") "kmiwaveram" contains a "Wave-RAM" of 8 banks of 16K sample words of 16bit each, which can possibly be used in a PPG synthesizer such as the "Wave 2.2", "Wave 2.3", or "EVU". For sample-transfer, "kmiwaveram" has a USB interface and an optional "PPG Communication Bus" interface. On a "CommBusTerm" system, the tools "cbmedimonitor" and "WaveProgEdit" can be used for "fast" sample-transfer to "kmiwaveram" via USB. "kmiwaveram" contains hardware and software components: * "kmiwaveram-HW": "KMI Wave-RAM" hardware * "KMIWAVERAMBIOS": firmware for "kmiwaveram-HW" Copyright (C) 2026 by Klaus Michael Indlekofer. All rights reserved. Note: Special restrictions apply. ... -
11
A new 64-bit RISC platform, complemented by a set of development tools, standards specifications and synthesizable VHDL implementations.
-
12
Phobia
Phobia Motor Controller
PMC is an open project that aims to build the quality permanent magnet synchronous machine (PMSM) controller for use in a variety of scopes like RC or electric transport. -
13
HelloWord-Smart Keyboard
High-end modular keyboard platform with deep customizability
...The hardware architecture is modular: the keyboard, dynamic module, and base connect via FFC/contacts so you can swap out the dynamic side module or bottom. The documentation includes 3D models for casing, firmware binaries, and tools for customization. -
14
UrJTAG aims to create an enhanced, modern tool for communicating over JTAG with flash chips, CPUs, and many more. It is a descendant of the popular openwince JTAG tools with a lot of additional features and enhancements.
-
15
deej
Set app volumes with real sliders! Arduino project to build hardware
deej is an open-source hardware volume mixer for Windows and Linux PCs. It lets you use real-life sliders (like a DJ!) to seamlessly control the volumes of different apps (such as your music player, the game you're playing and your voice chat session) without having to stop what you're doing. Control your microphone's input level. Lightweight desktop client, consuming around 10MB of memory. Runs from your system tray. Helpful notifications to let you know if something isn't working. The... -
16
Project's goal is to create better tools for diagnosing Linux systems. Diagnostics include first failure data capture, error log analysis, preventative testing, and system inventory gathering. You can now find Power System specific packages on github. libservicelog : https://github.com/power-ras/libservicelog servicelog : https://github.com/power-ras/servicelog lsvpd : https://github.com/power-ras/lsvpd libvpd : https://github.com/power-ras/libvpd ppc64-diag : https://github.com/power-ras/ppc64-diag sysfsutils is moved to github. ...
-
17
lm-sensors
lm-sensors repository
...Configuration files map raw chip registers to friendly labels and scaling factors, so outputs reflect real hardware characteristics across many vendors. With this foundation, higher-level tools (like fancontrol or graphical monitors) can automate cooling policies and warn about thermal or power issues before they become failures. -
18
NoteBook FanControl (NBFC)
Cross-platform fan control service for notebooks
...If you want to build NBFC from source, the first thing you have to do is to download the source code. You can easily clone the NBFC repository via git. Make sure the Mono runtime + development tools are installed on your machine (Debian based distros: mono-complete, Arch based distros: mono). Config files are an integral part of NBFC, because they define how NBFC interacts with your notebook's embedded controller (EC). The EC monitors your system's temperatures and controls the fan(s). It sits on the motherboard or is integrated into a Super I/O chip & is connected to the Southbridge via the Low Pin Count (LPC) bus. -
19
Please find the linuxwacom project's new home on Github: https://linuxwacom.github.io/ Previous Description: This project manages the libraries, configuration, and diagnostic tools for Wacom tablets running under Linux. It also maintains updated Linux kernel drivers and Xorg/XFree86 XInput drivers.
-
20
A project for a highly scalable protocol and framework and a collection of software tools for m2m (machine to machine communication) and IoT Internet of Things. The programs here works on Windows and Linux and are based around VSCP, The Very Simple Control Protocol. Repository is here: https://github.com/grodansparadis/vscp_software and here https://github.com/grodansparadis/vscp_firmware
-
21
Ink is a command line tool which displays the ink level of your printer. It makes use of libinklevel.
-
22
EventMachine
EventMachine, fast, simple event-processing library for Ruby programs
EventMachine is an event-driven I/O and lightweight concurrency library for Ruby. It provides event-driven I/O using the Reactor pattern, much like JBoss Netty, Apache MINA, Python's Twisted, Node.js, libevent and libev. Extremely high scalability, performance and stability for the most demanding production environments. An API that eliminates the complexities of high-performance threaded network programming, allowing engineers to concentrate on their application logic. This unique... -
23
rkflashtool
Tools for flashing Rockchip devices
Tools for flashing Rockchip devices. -
24
-
25
Gentoo CNC
Solution for changing your device into full-feature CNC controller
GentooCNC is a Gentoo based Linux didtribution designed to support hard real-time control of equipment such as industrial machine tools, 3D printers, laser cutters, robots, and coordinate measuring machines using LinuxCNC. GentooCNC is designed to target embedded platforms such as the BeagleBone, Mini2440, as well as conventional desktop platforms.
