Search Results for "easy run opensource"

...Betaflight supports a wide range of flight controllers with at least an STM32F4 MCU. You can use nearly any piece of modern hardware out there. Full telemetry and high refresh rate for receivers, camera and VTX control, RGB LEDs, and much more! Run the configurator on any device, whether it is using Windows, MacOS, Linux, or Android. With the Betaflight OSD you can get all relevant flight metrics directly into your FPV video feed. An easy-to-use drag-and-drop configuration allows the placement of values like used mAh and LiPo Voltage readings. Additionally, you can change most firmware settings using stick commands without even removing your goggles.

...AFIs are reusable, shareable and can be deployed in a scalable and secure way. Development experience leverages an optimized compiler to allow easy new accelerator development or migration of existing C/C++/openCL, Verilog/VHDL to AWS FPGA instances. Fully custom hardware development experience provides hardware developers with the tools required for developing AFIs for AWS FPGA instances.

ipmiutil is an easy to use set of IPMI server management utilities. It can get/set sensor readings & thresholds, automate SEL management, do SOL console, etc. Supports Linux, Windows, BSD, Solaris, MacOSX. The only IPMI project tool that runs natively on Windows. See ipmiutil.sf.net for rpms, etc. (formerly called panicsel). It can run driverless in Linux for use on boot media or embedded environments.

[Introduction] The xBridge-M01 product is a multifunctional USB bridge developed by Doidx. It can control and transmit SMBus/I2C, GPIO, Clock and other interfaces through USB. The product includes software and hardware. It has the characteristics of easy use and development. The core chip is CP2112 Graphical software and operating manual can be downloaded for free at http://xbridge-m01.doidx.com Provide the underlying Java API, http://xsmbus-m01.doidx.com , which can do simple...

...You should set the ESP8266 CPU to run at 160MHz (at least during the pairing process), to avoid the tcp-socket disconnection from the iOS device caused by a timeout.

[Introduction] xSmbus-m01 is not only a Java API, but also a program that can be executed separately. The following are its function options: Need to be executed at the command prompt, java -jar /YourPath/xSmbus-m01-1.0p.jar Help - list the parameter table Verification - verify that the product is working properly Test - used for system maintenance, in advance Check - determine if there is a device on the I2C location Scan - search in the range of 00-FF, search out on the I2C bus...

MySensors is an open-source hardware and software community focusing on do-it-yourself home automation and Internet of Things. We're here to help people who'd like to create original and affordable sensors and actuators based on components like Arduino, ESP8266, Raspberry Pi, NRF24L01+ and RFM69. Does it sound complicated? Don’t worry, we’ll explain everything. We provide easy-to-follow build instructions, ready-to-use code examples, and adaptable open-source hardware designs. All of this...

sane-troubleshoot is a GUI program for linux that diagnoses problems with an installation of sane (scanner access now easy) the api for scanners. originally written by Henning Geinitz, there has been no development since 2005. This project takes up development in order to make sane-troubleshoot work on recent distros, and add new functions.

An OpenSource software (ApaciLinux) that allows to run a PHP Server to control a device connected through the serial port

Frexhwd is a simple and small Hardware Detection for Linux. It is written in Unix shell(Bash) and C Language. it easy to run on small, embedded or simple system.