Search Results for "digital library source code"
Sort By:
Showing 40 open source projects for "digital library source code"
View related business solutions-
Earn up to 16% annual interest with Nexo.Generate interest, access liquidity without selling, and execute trades seamlessly. All in one platform. Geographic restrictions, eligibility, and terms apply.
-
Try Google Cloud Risk-Free With $300 in CreditUse your credit across every product. Compute, storage, AI, analytics. When it runs out, 20+ products stay free. You only pay when you choose to.
-
1
Arduino IDE
Arduino IDE library
This repository contains the source code of the Arduino IDE 2.x, which is currently in the beta stage. The Arduino IDE 2.x is a major rewrite, sharing no code with the IDE 1.x. It is based on the Theia IDE framework and built with Electron. The backend operations such as compilation and uploading are offloaded to an arduino-cli instance running in daemon mode. This new IDE was developed with the goal of preserving the same interface and user experience of the previous major version in order... -
2
GuitarPedal
Linus learns analog circuits
GuitarPedal is an experimental repository exploring a digital guitar-effects signal chain implemented with lean, low-level code. The project demonstrates how to read audio input, process it through simple transformations, and write the result out in real time with minimal latency. It emphasizes straightforward, inspectable DSP so developers can follow the math and tweak parameters without a giant framework in the way. The codebase favors portability and simplicity, focusing on a handful of... -
3
ThingPulse ESP8266 Weather Station
ESP8266 Weather Station library supporting OpenWeatherMap
This code works best with the NodeMCU V2 ESP8266 module and an 0.96" OLED display. To get you up and running in no time we created a kit that contains all the necessary parts. By buying this and other kits from us you are funding the maintenance and development of this library. Make sure you use a version of the Arduino IDE which is supported by the ESP8266 platform. If you are using the PlatformIO environment for building, choose one of the available IDE integration or the Atom-based IDE,... -
4
The Open IPMI project aims to develop an open code base to allow access to platform information using Intelligent Platform Management Interface (IPMI).
-
AI-powered service management for IT and enterprise teamsGive your IT, operations, and business teams the ability to deliver exceptional services—without the complexity. Maximize operational efficiency with refreshingly simple, AI-powered Freshservice.
-
5
COBOL copybook to XML converter
Converts cobol copybooks to Xml/Java objects
CB2XML (CopyBook to XML) is a COBOL CopyBook to XML converter written in Java and based on the SableCC parser generator. This project includes utilities to convert an XML instance file into its COBOL copybook equivalent string buffer and vice versa. Source is now available in GitHub: https://github.com/bmTas/cb2xml -
6
JxMake
A Java-based cross-platform build system.
JxMake is a Java-based, cross-platform build system primarily inspired by the syntax and features of GNU Make, Perforce Jam, and CMake. In addition, JxMake provides several capabilities not typically found in other console-based build systems, including a built-in lightweight GUI, serial console, serial plotter, multi-MCU in-system programmer, and more. Currently, JxMake's loadable libraries (build scripts) are primarily designed for non-OS MCU systems and experimental use. Full... -
7
Open source Algol 68 implementations
Implementations for the Revised Report language
This project offers open source implementations for UNESCO/IFIP's Algol 68 (the Revised Report language). The project offers two implementations: Implementation 1 is Algol68G: a recent checkout hybrid compiler/interpreter by Marcel van der Veer, supporting arbitrary arithmetic, partial parametrisation, complex numbers, POSIX threads, GNU plotutils, GNU scientific library, curses, sound, TCP sockets, RegEx and PostgreSQL. -
8
IIDC Camera Control Library
Capture and control API for IIDC compliant cameras
libdc1394 is a library that provides a high level programming interface for application developers who wish to control and capture streams from IEEE 1394 based cameras that conform to the 1394-based Digital Camera Specifications (also known as the IIDC or DCAM Specifications). libdc1394 also supports some USB cameras that are IIDC compliant. Besides capture and control, libdc1394 provides a full set of colour space conversion functions (including RAW decoding), vendor specific functions... -
9
GXSM
Scanning Probe Microscopy Controller and Data Visualization Software
...A plug-in interface allows any user add-on data-processing and special hardware and instrument support. Latest: NC-AFM and related explorative methods as SQDM can be configured. High-Speed external PAC-PLL hardware option with digital DSP link. Based on several hardware options it supports a commercially available DSP hardware and provided also Open Source Code for all the low level signal processing tasks and instrument controls in a most flexible and adaptable manner. All latest software is available via SVN only or Live Demo/Install CD: http://www.ventiotec.de/linux/GXSM-Linux.iso -
Gemini 3 and 200+ AI Models on One PlatformBuild generative AI apps with Vertex AI. Switch between models without switching platforms.
-
10
MySensors
MySensors library and examples
...We provide easy-to-follow build instructions, ready-to-use code examples, and adaptable open-source hardware designs. All of this runs on the MySensors software library for secure communication that has been battle-tested with more than 20 of the leading home automation controllers on the market. So, join in, have fun and create your own connected home experience! We've combined the Arduino platform with a small radio transceiver into a fun, flexible world of low cost wireless sensors. -
11
SmGen
Verilog Finite State Machine (FSM) Code Generator
SmGen is a finite state machine (FSM) generator for Verilog. On the other hand, it is not an FSM entry tool. The input is behavioral Verilog with clock boundaries specifically set by the designer. SmGen unrolls this behavioral code and generates an FSM from it in synthesizable Verilog. Clock boundaries are explicitly provided by the designer so there is good control on the expected timing -
12
EtherCard
EtherCard is an IPv4 driver for the ENC28J60 chip
EtherCard is a driver for the Microchip ENC28J60 chip, compatible with Arduino IDE. It is adapted and extended from code written by Guido Socher and Pascal Stang. High-level routines are provided to allow a variety of purposes including simple data transfer through to HTTP handling. Non-AVR boards are NOT currently supported (101/Zero/Due) #211 Hardware: Depending on the size of the buffer for packets, this library uses about 1k of Arduino RAM. Large strings and other global variables can... -
13
Arduino Si4735 radio library
Arduino and Silicon Laboratories Si4735 radio library
This library controls many Silicon Laboratories Si47xx family radio chips with an Arduino microcontroller. Major features include: • I2C and SPI bus • Supports "original" (Uno, Duemilanove, and their clones), Mega 2560, Leonardo, and Due Arduinos • FM/AM receive modes; including short, medium, and long wave AM • Analog and/or digital audio output • FM RDS and RBDS • Localization of receive bands, channel spacing, FM de-emphasis, and RDS/RBDS • Correctly decodes RBDS PI codes into... -
14
Cortex GNAT Run Time Systems
Supports writing Ada software for Cortex-M3, M4F boards
DEVELOPMENT OF THIS PROJECT HAS MOVED TO GITHUB, at https://github.com/simonjwright/cortex-gnat-rts This project contains various GNAT Ada Run Time Systems (RTSs) targeted at Cortex boards: so far, the Arduino Due (http://www.arduino.org) and the STM32F4-series evaluation boards from STMicroelectronics (http://www.st.com). It is intended that releases will allow the development of proprietary software (by the use of the GCC Runtime Library exception for project-developed code, and by... -
15
Sprut Usb4All Framework
A high level API, that provides access to a Microcontroller with the
This library encapsulates the communication protocol of the Sprut-usb4all. Supporting the of MCD and CDC firmware. -
16
...It sounds complicated, and it is. IT IS ALSO TOTALLY UNNECESSARY. Why not have the DLL as managed code?? Why not simply reference the library in your project and just call its functions?? This project does just that Licence: LGPLV3.: In summary, the only thing we ask is if you improve / bugfix / extend the library then feed these changes back into the project by emailing jon_newcomb or requesting sourceforge access. Applications you develop that use this library are not covered by this licence and can remain closed source and commercial
-
17
Xorg X11 dialbox input driver
The Xfree-independent Xorg X11 input driver for the SGI dialbox
This driver allows using the SGI dialbox on linux systems, which lack the Xfree86 library. Users of Redhat EL/Fedora/Centos 64 bit machines may use the rpm to install the driver. Other users currently need to compile the driver source code and install the driver manually. This driver is based on source code available from https://sourceforge.net/projects/dialbox/. -
18
ApproxAdderLib
Library of Approximate Adders
We provide MATLAB and Verilog Models of GeAr, and previously proposed adders (ACA-I, ETAII, ACA-II and GDA) at http://sourceforge.net/projects/approxadderlib/ GeAr is a low latency Generic Accuracy Configurable Adder that provides a higher number of potential configurations compared to state-of-the-art approximate adders, thus enabling a high degree of flexibility and trade-off between performance and output quality. These MATALB and Verilog models can allow software programmer as well as hardware designers to evaluate their code and design. To the best of our knowledge, this is the first open-source library of approximate adders that facilitates reproducible comparisons and further research and development in this direction across various layers of design abstraction. This work is a result of collaborative effort between Chair for Embedded Systems (CES) at Karlsruhe Institute of Technology (KIT), Germany and Vision Image and Signal Processing (VISpro) Lab at SEECS-NUST, Pakistan. -
19
We are developing a set of Delphi components to communicate with a ModBus PLC over TCP/IP. The library provides components to implement both a ModBus master and a Modbus slave, and is based on the Indy component set (both Indy 9 and 10 are supported) De source code of the project has been moved to GitHub!
-
20
tew-652brp_v2_wcl
Client mode firmware for TrendNET TEW-652BRP V2
Firmware to run the TrendNET TEW-652BRP version 2.x wireless router in client mode. Based on GPL firmware provided by TrendNET and modified to change the operating mode of the router from Access Point to wireless client. -
21
VPreproc
C++ Verilog macro preprocessor
This is a standalone preprocessor for the Verilog HDL language. It is modified from the Verilog-PreProcessor of Verilog Perl tool 3.314. Most of the code is written by the team led by Wilson Snyder. What I have done in this project: * Provide a standalone command line interface (without Perl). * Replace the parts implemented in Perl to C++. * Encapsulate the package in a separated namespace for better independence. What I may do in the future: * Replace the C language features to... -
22
RTD DM5408 Driver Port for Linux
A Linux driver for RTD DM5408 / DM408 ISA acquisition card
A Linux driver for RTD DM5408 / DM408 ISA acquisition card. A DKMS module and a dynamic library written from scratch but trying to keep same functions structure of its official Windows 98 driver. I don't recommend it for production. I'm just trying to learn writing drivers for Linux with some interest in Electronics Interfacing. -
23
Jcapi will open the world of ISDN (Integrated Services Digital Network) programming to Java developers.
-
24
Pegasus Scribble offers both a library and an end-user application to use the digital pen offered by Pegasus Technologies under Linux.
-
25
JTAG interface library for FTDI chips. Linux port of the ftcjtag library from ftdi( http://bit.ly/98Vul3 ). Implementation relies on ftd2xx.so ( not libftdi.so ) which makes it windows compatible.
