Search Results for "control"

smartmontools contains utility programs (smartctl, smartd) to control/monitor storage systems using the Self-Monitoring, Analysis and Reporting Technology System (S.M.A.R.T.) built into most modern ATA and SCSI disks. It is derived from smartsuite.

ipmiutil is an easy to use set of IPMI server management utilities. It can get/set sensor readings & thresholds, automate SEL management, do SOL console, etc. Supports Linux, Windows, BSD, Solaris, MacOSX. The only IPMI project tool that runs natively on Windows. See ipmiutil.sf.net for rpms, etc. (formerly called panicsel). It can run driverless in Linux for use on boot media or embedded environments.

cooling home automation with Arduino(C) and Raspberry(front-end, python). Arduino features: - control PC 4-pin fan with PWM; - measure temperature/humidity with DHT11/22; - adjust fan RPM depend on temperature; - console management; - MQTT serial output. front-end features: - data collection form serial port with MQTT - webUI with for sensors parameters

antimicro is a graphical program used to map keyboard keys and mouse controls to a gamepad. It's useful for using a gamepad on PC games that do not have any form of built-in gamepad support. This program can also be used to control any desktop application with a gamepad. On Linux, this means that your system has to be running an X environment in order to run this program. This program currently works with various Linux distributions, Windows (Vista and later), and FreeBSD, but with limited support for FreeBSD and Windows XP.

Barrier is a software that works just like a KVM (keyboard, video and mouse) switch, which allows you to use a single mouse and keyboard to control several different computers by physically turning a dial on the box to switch the machine you're controlling at any given time. Barrier is able to do this in software, giving you control over different machines by simply moving your mouse to the edge of the screen, or by using a keypress to switch focus to a different system. ...

...OWFS is also ported to embedded routers, Mac OSX and Windows. Basically you can use these inexpensive little sensors and other chips with very simple wiring to sense and control the physical environment. The interface is very flexible -- everything from a web browser, to read and writing directly to the chip's "file" to integrating with your programs -- even over the internet. There is a growing number of 1-wire sensors: temperature, voltage, humidity, light, ultraviolet, pressure, thermisters, thermocouples, programmable microcontrollers, relays, lights, LCD panels, etc

control cd organizer devices with a plugin-based architecture. Currently supports Dacal DC-300 and KDS CDM-751

An FM radio tuner daemon and command line control program. Tested with D-Link USB Radio (DSB-R100). Tested under Linux & FreeBSD.

These tools are used to view information about, and to control, Media Changer devices such as Tape and DVD/CD libraries.

Linux Projector Controls is a simple GTK application written in C++ using Glade to design the GUI interface. It's main purpose is to support the control of various video projectors using serial communications.

FreeBSD Control Center is a tool that provides a graphical environment for configuration, tuning and making services available in an few clicks of the mouse.

geskoctrl is a application for download/upload firmware for PBXes and to control these PBXes from the german company GESKO.

Meskalin is a *nix parallel port control program it allows you to easily control LED's or wetwire devices like brainwave machines ported for: FreeBSD, netBSD, openBSD and Linux

A portable library to control the ICOM PCR-1000 computer controlled general purpose radio receiver and gui front ends for X, Aqua, and windows32