Search Results for "virtual-machine"

PMC is an open project that aims to build the quality permanent magnet synchronous machine (PMSM) controller for use in a variety of scopes like RC or electric transport.

...It also incorporates features roughly equivalent to font-GDOS: - a caching system so you can use more fonts for a given amount of memory, - built in bezier functions This release includes ttf2gem, a utility program that creates accurate gem fonts from a true type font (new for 2.3) Using true type fonts gives you 3 big benefits: - you can choose from a vast range of true type fonts - true type fonts are scalable so you can have almost any size font you want - true type fonts need much less disk storage than typical gem printer fonts, so even on a low spec machine you can use lots of fonts. Gem fonts and true type fonts complement each other perfectly - gem fonts are small and fast, while true type fonts are device and resolution independent so are scalable to any point size at any resolution.

Documentation, examples, and reference driver code for the VMware virtual graphics device used by all VMware virtual machines. This project provides the information and code necessary to write both 2D and 3D graphics drivers for this device.

...Besides capture and control, libdc1394 provides a full set of colour space conversion functions (including RAW decoding), vendor specific functions and direct camera register access. Keywords: ieee1394, IIDC, DCAM, firewire, USB, machine vision, computer vision, video capture, library

Barrier is a software that works just like a KVM (keyboard, video and mouse) switch, which allows you to use a single mouse and keyboard to control several different computers by physically turning a dial on the box to switch the machine you're controlling at any given time. Barrier is able to do this in software, giving you control over different machines by simply moving your mouse to the edge of the screen, or by using a keypress to switch focus to a different system. Barrier was built to be simple and reliable, allowing you to control a different machine by simply using your mouse and keyboard from another. ...

serialconsole (sc) is a minimal terminal program allowing to use one machine to access the serial console of another machine.

This project was originally designed to provide an open-source replacement for PPJoy. The product, at this point, consists of virtual joystick devices that is seen by the system as a standard joystick but its position-data is written to it by a feeder application. An existing feeder application that takes advantage of this product is SmartPropoPlus. If you are an application writer you can very easily write an application that controls a joystick (e.g. mouse-to-joystick, keyboard-to-joystick). ...

A project for a highly scalable protocol and framework and a collection of software tools for m2m (machine to machine communication) and IoT Internet of Things. The programs here works on Windows and Linux and are based around VSCP, The Very Simple Control Protocol. Repository is here: https://github.com/grodansparadis/vscp_software and here https://github.com/grodansparadis/vscp_firmware

can4linux is hosted on https://gitlab.com/hjoertel/can4linux since 2016. Don't use SourceForge anymore for this code. can4linux is an universal Linux device driver for ISA or PCI interface boards with CAN interface and embedded CAN controller solutions. Based on the API provided by can4linux commercial protocol stacks for CANopen, J1939 and DeviceNet are available. A first PCI board with an FPGA based CAN FD controller is supported (TARGET=IXXAT_IB500) in the CAN FD ISO mode but also non-ISO

Virtual-Audio-Pipeline:- A WDM Virtual Audio Cable/Device It is a WDM based Virtual Audio Device Driver, can be used as a Virtual Sound Card. No Hardware is requred. Can be used as an Audio Loopback Device. The following are its Features 1. Supports PCM, WAVEEXTENSIBLE format 2. Supports 8 to 32 bit sample format 3. Supports 8000 to 192000 Hz Sample rate 4.

A Linux Alsa MIDI device driver for the Mixman dm2(TM) virtual turntable device.

A command line client for Jan Derogee's Cassiopei module for CBM computers line C64, VIC20, PET etc.

VisualVNC is a connector between virtual network and physical network. A virtual network mainly refers to the topology created by GNS3 (Graphical Network Simulator, a popular network simulator), the physical network means the real machines or virtual machines (created by VMware, virtualbox and so on) which are running Windows.

The Pinball Machine Reverse Engineering Kit (PMREK) includes source code for a Linux 2.6 kernel module and a user program to control Bally pinball machines manufactured between 1977 and 1985 via memory-mapped I/O.

A virtual floppy drive that mounts image files (*.img) as new browseable computer resources. Tested from WinXP (32bit) to Win7 (64bit). Derived from: https://sourceforge.net/projects/vfd/

This is an open hardware project. I am making a portable gaming platform using a r8c processor from renesas and a dot matrix lcd display.

The N8VB vCOM Virtual Serial Port Driver creates pairs of virtual serial ports on your Windows 2000 or XP system that are "virtually" connected together like a null modem cable. It behaves like a Virtual Null Modem Cable.

This device driver implements KMDF based virtual bus driver and generic virtual disk hosted on it. Users can add virtual disks to Windows OS which are then seen and managed by OS as generic, regular disks. Virtual disks are plug in/out with cmdln utility

G15daemon provides support for the G15 keyboard. Multiple LCD clients are supported with a 'virtual' LCD buffer for applications or libraries, and all keys are usable. Users flip through connected screens with a press of a button.Linux, OS-X & Solaris

A small application that allows the user to control JACK transport via Midi Machine Control (MMC) commands. MMC is a common protocol sent by hard disk recorders and midi control pads to let other devices or programs know where you are in a track.

Library for handling XBee / XBee-PRO RF modules. The library is written in C and supports the following platforms: Linux (x86, MIPSel), Windows (x86), AT91 SAM7 microcontrollers.

NedoPC SDK was moved to https://gitlab.com/nedopc/sdk

This project demonstrates FAT12 file system as interface to control LPC2148 with FreeRTOS. Control interface is exposed via USB mass storage device with virtual FAT12 file system and using files read/write access to provide control interface to HW.

Schematics and micro-controller code for a version of the scoring apparatus used in competitive fencing and a compatible remote control.

This is a virtual floppy drive for Windows NT / 2000 / XP / 2003 / Vista / Windows 7 (both 32-bit and 64-bit versions)