Search Results for "power"
Sort By:
Showing 51 open source projects for "power"
View related business solutions-
$300 Free Credits for Your Google Cloud ProjectsLaunch your next project with $300 in free Google Cloud credits—no strings attached. Test, build, and deploy without risk. Use your credits across the entire Google Cloud platform to find what works best for your needs. After your credits are used, continue with always-free tier services. Only pay when you're ready to scale. Sign up in minutes and start exploring.
-
Stop Cyber Threats with VM-Series Next-Gen Firewall on AzureGain integrated visibility across all traffic in a single pass. Deploy Palo Alto Networks VM-Series to determine application identity and content while automating security policy updates via rich APIs.
-
1
Lenovo Legion Linux Support
Driver and tools for controlling Lenovo Legion laptops in Linux
Lenovo Legion Linux (LLL) brings additional drivers and tools for Lenovo Legion series laptops to Linux. It is the alternative to Lenovo Vantage or Legion Zone (both Windows only). It allows you to control features like the fan curve, power mode, power limits, rapid charging, and more. This has been achieved through reverse engineering and disassembling the ACPI firmware, as well as the firmware and memory of the embedded controller (EC). -
2
caenels-hzb
An EPICS device support for CAEN power supplies.
This is an EPICS ( http://www.aps.anl.gov/epics/about.php ) device support for power supplies by CAEN ( https://www.caen.it/sections/power-supply/ ). These are ethernet controlled power supplies used at the Helmholtz-Zentrum Berlin ( https://www.helmholtz-berlin.de ). -
3
IPMI Management Utilities
Manage and interpret IPMI systems with common a software tool
ipmiutil is an easy to use set of IPMI server management utilities. It can get/set sensor readings & thresholds, automate SEL management, do SOL console, etc. Supports Linux, Windows, BSD, Solaris, MacOSX. The only IPMI project tool that runs natively on Windows. See ipmiutil.sf.net for rpms, etc. (formerly called panicsel). It can run driverless in Linux for use on boot media or embedded environments. -
4
Firmware for a power supply with an ATMega32 uC. The hardware is based on the DCG of the ctlab project from the german magazine c't.
-
Stop vibe-debugging.AppSignal's MCP server hands Claude, Cursor, or Zed your real errors, traces, and the deploy that shipped them. AI writes the fix; you review the diff.
-
5
TuxClocker
Qt overclocking tool for GNU/Linux
...TuxClocker provides a user-friendly GUI atop lower-level interfaces, making it easier to control clock speeds, fan behavior, and other tuning parameters without resorting exclusively to command-line tools. It is especially useful for Linux enthusiasts and power users looking to optimize performance for gaming, content creation, or benchmarking. The project also has a companion command-line version (tuxclocker-cli), broadening usability scenarios for scripting or headless setups. While the features and hardware support may vary by distribution and driver stack, TuxClocker fills a niche for integrated Linux performance tuning with a polished front end. -
6
EQ Track
Collection of embedded softwares to control a telescope mount.
EQ Track purpose is to provide amateur telescope makers (ATM) with electronic board schematics and embedded software to control their telescope mount via stepping motors. EQ Track comes in different "flavors" : - "Basic" controls the right ascension and declination motors of an equatorial mount. - "Go To" controls the motors of a mount in any orientation (ie. equatorial, altazimuth, alt-alt), to point and track equatorial coordinates. -
7
culfw
GPL'd firmware for the CUL family of devices
...culfw is used in conjunction with the CUL/CUN/CUR and a high level software like fhem to automate some common tasks in the household like switching lamps / shutters / heating / etc. and to log events like temperature/humidity/power consumption. culfw supports following RF protocols: "SlowRF" mode: FS20: send/receiveo, FHT: send/receive, S300: receive, EM1000: receive, HMS: receive, Hoermann: receive. ESA2000: receive, Lacrosse TX2/TX3: receive, Intertechno: send BidCos(R) in the "AskSin" mode (20kHz datarate, FM). HomeMatic(R) Wireless devices use this protocol. ... -
8
Display power off utility. Powers off desktop/notebook display and optionally locks workstation. Can be set as a screensaver. Can be launched as a system tray icon application.
-
9
This project is a development area for a Linux Device driver for IBM Power Linux RAID SCSI HBA's, including the ipr driver and iprutils packages.
-
Our Free Plans just got better! | Auth0You asked, we delivered! Auth0 is excited to expand our Free and Paid plans to include more options so you can focus on building, deploying, and scaling applications without having to worry about your security. Auth0 now, thank yourself later.
-
10
libusbK
A complete software solution for windows usb devices
...If you are a usb developer or usb device manufacturer seeking a driver solution for a new USB widget then libusbK could be for you. libusbK encompasses a 100% WinUSB compatible api/funtion set. All WinUSB power/pipe polices are fully supported by the libusbK driver. In Addition, libusbK has full support for isochronous endpoints and an extensive set of additional modules to simplify development. Source code repository using github: https://github.com/mcuee/libusbk -
11
Rad Kernel (whyred)
Custom kernel for whyred (Redmi Note 5 Pro/AI)
RAD Kernel is a custom linux kernel for whyred (Redmi Note 5 Pro/AI) that contains all features you need and aims for best balance between performance and battery. -
12
L-ink_Card
Smart NFC & ink-Display Card
...Its functionality may include showing balance, last transaction, QR codes, or other custom info on the e-ink screen, and interfacing with smartphones or readers via NFC. Because it uses e-ink, the card can display static content with minimal power drain, making it practical for real-world card use. The repository includes board design files, firmware, and supporting software for customizing what the card shows. For hardware hackers and smart-card enthusiasts, it’s a fascinating hybrid of microcontroller, low-power display, and NFC tech in a familiar credit-card size. -
13
newlearnerspermit
C for programmable guitar amp
...Also, the signals of two microphones, two guitars, and one mp3 device will be inputted into and passed through two 3-band programmable equalizers. All of the processed signals will pass through and be amplified by a clean master volume controlled power amp. The digital effects will be toggled by means of a floor panel controlled by digital foot switch controller communication with the Arduino hardware via a digital cable. Also, the preamp signal can be alternatively connected to a separate power amp. -
14
Project's goal is to create better tools for diagnosing Linux systems. Diagnostics include first failure data capture, error log analysis, preventative testing, and system inventory gathering. You can now find Power System specific packages on github. libservicelog : https://github.com/power-ras/libservicelog servicelog : https://github.com/power-ras/servicelog lsvpd : https://github.com/power-ras/lsvpd libvpd : https://github.com/power-ras/libvpd ppc64-diag : https://github.com/power-ras/ppc64-diag sysfsutils is moved to github. ...
-
15
USBphpTunnel
Android app for MXQ TVbox to control an Arduino board via USB from PHP
Designed for data-logging applications (weather, hydroponics, greenhouses, aquariums, home automation, power consumpion, solar or wind generators etc.), this solution can be useful also in alarms and burglar. Now you can develop MySQL and web enabled Arduino applications only working on Arduino and PHP. To keep ligth the Arduino Sketch, you can port all not realtime logic to PHP side. At the end your application will works on XQ+Arduino UNO even 24/7 with only 20 Watt AC power, and can be controlled by smartphone via WiFi or from Internet using some free dynamic IP. ... -
16
IrrigationController
Smart Home Irrigation System
The project contains the following modules: * Main Controller Module which is responsible for scheduling and switching the water pumps, monitoring the water level and temperature, and reading the Soil Moisture Sensors. The module has a 4 line alphanumeric LCD that makes the system easy to use. * Sensor Controller Module is attached to the Main Controller Module via RS232 interface. This module is the master controller for the Soil Moisture Sensors and also contains a Dallas 1-Wire... -
17
PUB! Programmable USB Button
Program a button to send keystrokes to your computer
PUB! is a Programmable USB Button on which you can program with a sequence of keystrokes. When you press the button those keystrokes are "replayed" over a USB connection. The button is programmed using an innovative and slightly quirky interface that does not require any custom software to be installed on your computer. All you need is a text editor like Notepad or gedit. -
18
lpACLib
An Open-Source Library for Low-Power Approximate Computing Modules
The “lpACLib” library contains the VHDL description of accurate and approximate versions of several arithmetic modules (like adders and multiplier of different bit-widths) and accelerators. Moreover, it also provides the corresponding software behavioral models/implementations developed in C and MATLAB to enable quality characterization. Besides our novel designs, it also contains implementations for several state-of-the-art arithmetic modules and their approximate versions. This open-source... -
19
mochad is a Linux TCP gateway daemon for the X10 CM15A RF (radio frequency) and PL (power line) controller and the CM19A RF controller.
-
20
PowerLed
RGB power indicator
This is the software i created for controlling my PC's power indicator. The indicator has been replaced with an Arduino controlled RGB led. Core Temp is required and the Arduino code requires the CMD Messenger library. This software is in beta, and not 100% completed yet. -
21
IR-controller
STM-32 code for IR-spectrometer management
This is a project of IR-spectrometer controller. It based on STM32F103 chip with a lot of peripheral devices (1-wire thermometers, stepper motors, platinum thermistors and so on). In future I hope to add here schematics of full control system for this device. -
22
HSK
High Speed Karlsruhe open automotive code initiative
Since the summer of 2010, the FSAE team High Speed Karlsruhe uses Infineon's XC878 to power its electronics. The XC878 is an 8052 compatible 8-bit µC. Our dedication is to 8-bit real time applications, guaranteed by the powerful peripherals of the XC878. This project aims to publish those portions of our code, which may be of use to a wider audience. -
23
...https://github.com/nfont/powerpc-utils https://github.com/nfont/powerpc-utils-python The powerpc-utils package provides a set of tools and utilities and utilities for maintaining and enabling certain features of Linux on Power.
-
24
IRK! Infrared Remote USB Keyboard
Control your computer with an IR remote
This is an open-hardware Infrared Remote Controlled USB keyboard, without keys, implemented using a PIC micro-controller and MikroC. IRK! enables you to use your LEARNING remote control to control any system that you can plug a USB keyboard into (Windows, Linux, Mac). Great for controlling a home theatre system such as MythTV, XBMC or Media Center. No drivers are required. You can program *any* USB keyboard function (with or without Control, Alt, Shift and GUI modifiers) to a button on... -
25
APMtimer
Disable, Get, or Set the APM timer found in recent WD Hard Disks
APMtimer provides a Linux/Unix utility that can permanently Disable, Get, or Set the value of the APM timer found in recent Western Digital 2.5 WD*PVX Hard Disks where the APM setting defaults to 0x60 after a power cycle.
