Open Source C++ Hardware Platforms
Sort By:
C++ Hardware Platforms
View 172 business solutionsBrowse free open source C++ Hardware Platforms and projects below. Use the toggles on the left to filter open source C++ Hardware Platforms by OS, license, language, programming language, and project status.
-
MongoDB Atlas runs apps anywhereMongoDB Atlas gives you the freedom to build and run modern applications anywhere—across AWS, Azure, and Google Cloud. With global availability in over 115 regions, Atlas lets you deploy close to your users, meet compliance needs, and scale with confidence across any geography.
-
Go From AI Idea to AI App FastAccess Gemini 3 and 200+ models. Build chatbots, agents, or custom models with built-in monitoring and scaling.
-
1
S.M.A.R.T. Monitoring Tools
Disk Inspection and Monitoring
smartmontools contains utility programs (smartctl, smartd) to control/monitor storage systems using the Self-Monitoring, Analysis and Reporting Technology System (S.M.A.R.T.) built into most modern ATA and SCSI disks. It is derived from smartsuite. -
2
Barrier
Open-source KVM software
Barrier is a software that works just like a KVM (keyboard, video and mouse) switch, which allows you to use a single mouse and keyboard to control several different computers by physically turning a dial on the box to switch the machine you're controlling at any given time. Barrier is able to do this in software, giving you control over different machines by simply moving your mouse to the edge of the screen, or by using a keypress to switch focus to a different system. Barrier was built to be simple and reliable, allowing you to control a different machine by simply using your mouse and keyboard from another. It works on all major operating systems (Linux, Windows, MacOS/OS X), including FreeBSD and OpenBSD. -
3
This project was originally designed to provide an open-source replacement for PPJoy. The product, at this point, consists of virtual joystick devices that is seen by the system as a standard joystick but its position-data is written to it by a feeder application. An existing feeder application that takes advantage of this product is SmartPropoPlus. If you are an application writer you can very easily write an application that controls a joystick (e.g. mouse-to-joystick, keyboard-to-joystick). If you are a beginner in device drivers you can take this code and enhance it to support more (or less) axes, buttons or POVs.
-
4
HP Linux Imaging and Printing
Hewlett-Packard's Linux imaging and printing software
The Hewlett-Packard Linux Imaging and Printing Project provides a unified single and multi-function connectivity solution for Linux. For support and help, please visit https://launchpad.net/hplip -
8 Monitoring Tools in One APM. Install in 5 Minutes.AppSignal works out of the box for Ruby, Elixir, Node.js, Python, and more. 30-day free trial, no credit card required.
-
5
Solution to the cooling fan noise annoyances Thinkpad T4x (T40/T41/T42/T43) notebook series. Allows the user to control fan activity based on the system temperature. Win XP Visual C++ project controls the fan via port IO to the embedded controller.
-
6
Snappy Driver Installer is an application for installing/updating drivers on PCs running Microsoft Windows using driverpacks or included folders with drivers. It can be used to install drivers on newly assembled PCs at places where Internet isn't available. Users can also use the software to keep their drivers up to date.
-
7
I/O performance Analysis Tool
-
8
ESP8266 Arduino Core
ESP8266 core for Arduino
ESP8266 Arduino Core is the Arduino core for the ESP8266 WiFi chip. It brings support for the ESP8266 chip to the Arduino environment, allowing you to write sketches, use familiar Arduino functions and libraries, and run these directly on ESP8266 without the need for an external microcontroller. ESP8266 Arduino core comes with libraries that enable it to perform a number of things. It can communicate over WiFi through the use of TCP and UDP; it can set up HTTP, mDNS, SSDP, and DNS servers; and it can perform OTA updates. ESP8266 Arduino core works with SD cards, servos, SPI and I2C peripherals. -
9
AlienFX Tools
Alienware systems lights, fans, and power control tools and apps
AlienFX Tools is a suite of utilities aimed at controlling lighting, fan, and power behaviors on Alienware systems, directly interfacing with USB or ACPI hardware rather than relying on official drivers. This project supports a broad range of effects and modes, allowing users to customize RGB lighting zones, create and switch profiles based on system states (like power source or running applications), and generate lighting behaviors tied to thermal and performance events. Because it operates at a low level, alienfx-tools can offer faster update rates and more flexible configurations compared to some manufacturer software. It includes both command-line and graphical frontend elements to support different user preferences, making it suitable for automation as well as interactive use. Enthusiasts use it to tailor lighting aesthetics and system responsiveness, especially on systems where official Alienware control panels are unavailable or problematic. -
AI-powered service management for IT and enterprise teamsGive your IT, operations, and business teams the ability to deliver exceptional services—without the complexity. Maximize operational efficiency with refreshingly simple, AI-powered Freshservice.
-
10
QmdevSimConnect
flight simulation USB HID hardware control
USB HID devices unified software for MSFS2020. one software controls all hardware devices. With running memory lower than 10MB. CPU usage is lower than 0.3% https://sourceforge.net/p/qmdevsimconnect/wiki/Home/ - Honeycomb Bravo throttle - WinWing AGP - Quickmade Products Game compatibility list https://docs.qq.com/sheet/DWERFQnRmVUFZeHBi?tab=urmsrq Latest News of Quickmade Products: https://www.facebook.com/quickmadesimulation -
11
Simple program that displays information about CUDA-enabled devices. The program is equipped with GPU performance test.
-
12
VoodooHDA is an open source audio driver for devices compliant with the Intel High Definition Audio specification. It is intended as a replacement for AppleHDA on Mac OS X with support for a wide range of audio controllers and codecs.
-
13
Display power off utility. Powers off desktop/notebook display and optionally locks workstation. Can be set as a screensaver. Can be launched as a system tray icon application.
-
14
This is a virtual floppy drive for Windows NT / 2000 / XP / 2003 / Vista / Windows 7 (both 32-bit and 64-bit versions)
-
15
ESP3D
FW for ESP8266/ESP8285/ESP32 used with 3D printer
This firmware allows not only to have a cheap bridge between Wifi and serial, but also to have a web UI to configure wifi, to monitor 3D printer and even control it, and to make things easy, UI is fully customizable without reflashing FW. Firmware should work with any 3D printer firmware (repetier/marlin/smoothie ware using GCODE) if the serial connection has a correct setup. I currently use it with my personal flavor of repetier for Due based boards. The web interface files are present in the data directory but UI has its own repository ESP3D-WEBUI. Use GPIO2 to the ground to reset all settings in a hard way, 2-6 sec after boot / not before!! Set GPIO2 to ground before boot change boot mode and go to special boot that do not reach FW. Currently, boot takes 10 sec - giving 8 seconds to connect GPIO2 to GND and do a hard recovery for settings. Complete configuration by web browser (Station or Access point) or by Serial/telnet commands. -
16
midisport-macos
M-Audio MIDISPORT USB 64-bit MIDI device driver for MacOS v10.14+
This project provides an open source MacOS v10.14+ (Mojave and above) compatible CoreMIDI Universal 64 bit device driver for M-Audio's MIDISPORT range of USB MIDI interfaces. This driver supports the following devices: MIDISPORT 1x1 MIDISPORT 2x2 MIDISPORT 4x4 MIDISPORT 8x8/S Oxygen 8 Keyboard Other devices which are compatible may also work, although presently, these are the only ones which have been tested. -
17
ATTENTION: This project is not maintained anymore. Current Macs properly manage temperature and fans. Speed fan controller and temp monitoring for MacBook Pro Unibody (Nvidia) for Windows under BootCamp. It allows to control MacBook fans speeds depending on the CPU and GPU temperature. ATTENTION: This program is designed and tested only on MacBook Pro with NVIDIA GPU. On newer MacBooks with ATI GPU the GPU temperature is not checked. On iMacs some sensors and fans are not used. In any case USE AT YOUR OWN RISK, I'm not responsible for overheating or hardware damage.
-
18
SnapKey
SnapKey: Open Source Alternative to Snap Tap & SOCD
SnapKey is a lightweight, open-source tool that operates from the system tray and is designed to track inputs from the WASD keys, without interfering with any game files. SnapKey's main role is to recognize when these keys are pressed and automatically release any previously engaged commands for them. This guarantees responsive and precise input handling. SnapKey handles the WASD keys by default and lets you rebind them to your liking via the config file. SnapKey: Open Source Alternative to Snap Tap & SOCD Visit SnapKey on GitHub for more information: https://github.com/cafali/SnapKey -
19
BRL-CAD
Open Source Solid Modeling CAD
BRL-CAD is a powerful cross-platform constructive solid geometry solid modeling system that includes an interactive geometry editor, ray-tracing for rendering & geometric analyses, network distributed framebuffer support, image & signal-processing tools. -
20
Synergy Core
The keyboard and mouse sharing tool
This is the open source core component of Synergy, a keyboard and mouse sharing tool. Control your computers with one mouse and keyboard. Control multiple computers using only one keyboard and mouse. Focus on developing software, designing, gaming and remove time switching between operating systems. Throw away the extra keyboards and spend time where it really matters. Simplify your workspace by combining multiple computers into one. Easily copy and paste between computers with no effort at all. Keep your passwords and sensitive data secure with TLS encryption. Key, mouse and data all sent fast and securely, directly over your local network. Advanced customization settings give you complete control of your setup. The next version is being built from the ground up by combining the latest technologies, Node.js and React, with the rock-solid stability of C++. -
21
Open Programmer
An USB programmer for PIC, dsPIC, AVR, serial memories
An USB programmer for various devices, including PIC, dsPIC, AVR microcontrollers, and various kinds of serial eeproms -
22
WinLIRC, the Windows port of the Linux Infrared Remote Control package. Control your computer via remote!
-
23
Blynk C++ Library
Blynk library for embedded hardware
Blynk is the most popular Internet of Things platform for connecting any hardware to the cloud, designing apps to control them, and managing your deployed products at scale. With Blynk Library you can connect over 400 hardware models (including ESP8266, ESP32, NodeMCU, all Arduinos, Raspberry Pi, Particle, Texas Instruments, etc.)to the Blynk Cloud. With Blynk apps for iOS and Android apps you can easily drag-n-drop graphic interfaces for any DIY or commercial project. It's a pure WYSIWG experience, no coding on iOS or Android required. Hardware can connect to Blynk Cloud (open-source server) over the Internet using hardware connectivity available on your board (like ESP32), or with the use of various shields (Ethernet, WiFi, GSM, LTE, etc). Blynk Cloud is available for every user of Blynk for free. Direct connection over Bluetooth is also possible. Check the included examples on how to use different types of connections (transports) and explore Blynk features. -
24
Karabiner-Elements
Powerful utility for keyboard customization
Karabiner-Elements is a powerful key remapper for macOS. -
25
WS2812FX
WS2812 FX library for Arduino and ESP8266
This library features a variety of blinken effects for the WS2811/WS2812/NeoPixel LEDs. It is meant to be a drop-in replacement for the Adafruit NeoPixel library with additional features. You can search for WS2812FX in the Arduino IDE Library Manager or install the latest (or development) version manually. More complex effects can be created by dividing your string of LEDs into segments (up to ten) and programming each segment independently. Use the segment() function to program each segment's mode, color, speed, and direction (normal or reverse). Note, some effects make use of more than one color (up to three) and are programmed by specifying an array of colors. Random color introduced alternating from start and end of strip. Alternating white/red/black pixels running. Strobe effect with different strobe count and pause, controlled by speed setting. Classic Strobe effect. Cycling through the rainbow.
