Open Source C Hardware Platforms

smartmontools contains utility programs (smartctl, smartd) to control/monitor storage systems using the Self-Monitoring, Analysis and Reporting Technology System (S.M.A.R.T.) built into most modern ATA and SCSI disks. It is derived from smartsuite.

Asuswrt-Merlin is a third party firmware for select Asus wireless routers. Based on the Asuswrt firmware developed by Asus, it brings tweaks, new features and other improvements to the original firmware, while retaining its performance and ease of use. Note that only downloads are hosted on SF.net - the complete source code can be found on https://github.com/RMerl/asuswrt-merlin (legacy 380.xx) and https://github.com/RMerl/asuswrt-merlin.ng (382 and newer releases).

Library to enable user space application programs to communicate with USB devices

hdparm - get/set ATA/SATA drive parameters under Linux

This project was originally designed to provide an open-source replacement for PPJoy. The product, at this point, consists of virtual joystick devices that is seen by the system as a standard joystick but its position-data is written to it by a feeder application. An existing feeder application that takes advantage of this product is SmartPropoPlus. If you are an application writer you can very easily write an application that controls a joystick (e.g. mouse-to-joystick, keyboard-to-joystick). If you are a beginner in device drivers you can take this code and enhance it to support more (or less) axes, buttons or POVs.

The Hewlett-Packard Linux Imaging and Printing Project provides a unified single and multi-function connectivity solution for Linux. For support and help, please visit https://launchpad.net/hplip

Barrier is a software that works just like a KVM (keyboard, video and mouse) switch, which allows you to use a single mouse and keyboard to control several different computers by physically turning a dial on the box to switch the machine you're controlling at any given time. Barrier is able to do this in software, giving you control over different machines by simply moving your mouse to the edge of the screen, or by using a keypress to switch focus to a different system. Barrier was built to be simple and reliable, allowing you to control a different machine by simply using your mouse and keyboard from another. It works on all major operating systems (Linux, Windows, MacOS/OS X), including FreeBSD and OpenBSD.

The "Open On-Chip Debugger" provides JTAG/SWD access from GDB (or directly with TCL scripts) to processors with ARM and MIPS based cores. See website for full list of supported targets.

Project's goal is to create better tools for diagnosing Linux systems. Diagnostics include first failure data capture, error log analysis, preventative testing, and system inventory gathering. You can now find Power System specific packages on github. libservicelog : https://github.com/power-ras/libservicelog servicelog : https://github.com/power-ras/servicelog lsvpd : https://github.com/power-ras/lsvpd libvpd : https://github.com/power-ras/libvpd ppc64-diag : https://github.com/power-ras/ppc64-diag sysfsutils is moved to github. New home for sysfsutils : https://github.com/linux-ras/sysfsutils

Linux driver for the ZyDAS ZD1211(b) 802.11a/b/g USB WLAN chip. There is the community zd1211 driver (based on the ZyDAS GPL driver) and the rewritten zd1211rw driver (included in Linux 2.6.18-rc1 and newer).

Notice! Effective August 16, 2024, Intel will no longer use Sourceforge to distribute software for Ethernet products. ==================== Please refer to our GitHub location for future software updates here: https://intel.github.io/ethernet-linux/

A very high quality package of printer drivers for CUPS on Linux and other POSIX-compliant operating systems. This project also maintains an enhanced Print plug-in for GIMP 2.x from the same code base.

Linux ATM Drivers for the Geos Multiport ADSL2+ router, Solos PCI Multiport ADSL2+ modem and Pulsar PCI ADSL Card

I/O performance Analysis Tool

# OBSOLETE The project has moved to CodeBerg at https://codeberg.org/IPMITool/ipmitool IPMItool provides a simple command-line interface to IPMI-enabled devices through an IPMIv1.5 or IPMIv2.0 LAN interface or Linux/Solaris kernel driver.

libusbK is a complete driver/library solution for vendor class usb device interfaces. If you are a usb developer or usb device manufacturer seeking a driver solution for a new USB widget then libusbK could be for you. libusbK encompasses a 100% WinUSB compatible api/funtion set. All WinUSB power/pipe polices are fully supported by the libusbK driver. In Addition, libusbK has full support for isochronous endpoints and an extensive set of additional modules to simplify development. Source code repository using github: https://github.com/mcuee/libusbk

ipmiutil is an easy to use set of IPMI server management utilities. It can get/set sensor readings & thresholds, automate SEL management, do SOL console, etc. Supports Linux, Windows, BSD, Solaris, MacOSX. The only IPMI project tool that runs natively on Windows. See ipmiutil.sf.net for rpms, etc. (formerly called panicsel). It can run driverless in Linux for use on boot media or embedded environments.

setserial is a program designed to set and/or report the configuration information associated with a serial port.

Betaflight is flight controller software (firmware) used to fly multi-rotor craft and fixed wing craft. This fork differs from Baseflight and Cleanflight in that it focuses on flight performance, leading-edge feature additions, and wide target support. Betaflight supports a wide range of flight controllers with at least an STM32F4 MCU. You can use nearly any piece of modern hardware out there. Full telemetry and high refresh rate for receivers, camera and VTX control, RGB LEDs, and much more! Run the configurator on any device, whether it is using Windows, MacOS, Linux, or Android. With the Betaflight OSD you can get all relevant flight metrics directly into your FPV video feed. An easy-to-use drag-and-drop configuration allows the placement of values like used mAh and LiPo Voltage readings. Additionally, you can change most firmware settings using stick commands without even removing your goggles.

Open source cross platform flash program for the STM32 ARM microcontrollers using the built-in ST serial bootloader over UART or I2C

The USB Rubber Ducky is a Human Interface Device programmable with a simple scripting language allowing penetration testers to quickly and easily craft and deploy security auditing payloads that mimic human keyboard input. The source is written in C and requires the AVR Studio 5 IDE from atmel.com/avrstudio. Hardware is commercially available. Imagine plugging in a seemingly innocent USB drive into a computer and installing backdoors, exfiltrating documents, or capturing credentials. With a few well crafted keystrokes anything is possible. If only you had a few minutes, photographic memory and perfect typing accuracy. The USB Rubber Ducky injects keystrokes at superhuman speeds, violating the inherent trust computers have in humans by posing as a keyboard. Inventing keystroke injection in 2010, the USB Rubber Ducky became the must-have pentest tool. With a covert design and simple "Ducky Script" language, this bad USB infiltrates systems and imaginations the world over.

The USB/IP Project aims to develop a general USB device sharing system over IP network. To share USB devices between computers with their full functionality, USB/IP encapsulates USB I/O requests into IP packets and transmits them between computers.

libdc1394 is a library that provides a high level programming interface for application developers who wish to control and capture streams from IEEE 1394 based cameras that conform to the 1394-based Digital Camera Specifications (also known as the IIDC or DCAM Specifications). libdc1394 also supports some USB cameras that are IIDC compliant. Besides capture and control, libdc1394 provides a full set of colour space conversion functions (including RAW decoding), vendor specific functions and direct camera register access. Keywords: ieee1394, IIDC, DCAM, firewire, USB, machine vision, computer vision, video capture, library

Flipper Zero Unleashed Firmware. This software is for experimental purposes only and is not meant for any illegal activity/purposes. We do not condone illegal activity and strongly encourage keeping transmissions to legal/valid uses allowed by law. Also, this software is made without any support from Flipper Devices and is in no way related to the official devs.

Display power off utility. Powers off desktop/notebook display and optionally locks workstation. Can be set as a screensaver. Can be launched as a system tray icon application.