Search Results for "linux device driver project"

myFocuserPro2 (myFP2) is an ASCOM - INDI - LINUX - WINDOWS telescope focuser with a large range of options. 324K+ file downloads. The most popular focuser project. (c) Copyright Robert Brown 2014-2026. All Rights Reserved. Code or portions of code may not be copied or used without written permission from the author. Other Focuser Projects myFP2ESP32 WiFi - https://sourceforge.net/projects/myfocuserpro2-esp32/ [ESP32 Only] myFP2ESP8266 WiFi - ...

This project is aimed to produce modified MK88 BIOS with new features: 1. Improved keyboard driver 2. Support for cp866 encoding 3. Support for DS/DD drives 4. Support for ROM extension cards

CP/M Plus on ZX Spectrum +3 has ability to load device drivers from normal disk files (with .fid extension) on boot. A Spectranet device (apart from being networking interface) contains 128kB of extra RAM that can be accessed even with the Spectranet firmware disabled. This project proposes a FID driver that exposes Spectranet's extra memory as a ramdisk to the CP/M Plus system. Changes in v1.1: keep floppy drive motor state (as set by CP/M) when paging in Spectranet RAM (to avoid motor jumps). ...

Since the summer of 2010, the FSAE team High Speed Karlsruhe uses Infineon's XC878 to power its electronics. The XC878 is an 8052 compatible 8-bit µC. Our dedication is to 8-bit real time applications, guaranteed by the powerful peripherals of the XC878. This project aims to publish those portions of our code, which may be of use to a wider audience.

FileSystem is an OPENSOURCE program for advanced disk management with built-in drivers for PATA IDE Hard Disks and DVD/CDROM Drives, USB Mass Storage Drivers. Implemented file systems : FAT32 / ISO9660 / EXT2. It can be compiled for DOS, LINUX, WIN32

Mind the re-programmable hardware, even CPU for most mobile devices. Flushable devices. Flushable CPU, modem, camera - any kind of EMPTY NAND device, creating a new one by the engineering forth and back and forward again. We recreate the world

OpenVGA is an free and open FPGA-based implementation of a VGA compatible graphics adapter, and utilising low-cost hardware. The project includes the PCB schematic and artwork, Verilog HDL, firmware assembly code, and driver source code.

This Project was born on friday, 13th of February. The target of this project is to edit the existing Wireless LAN Realtek RTL8180L-Wlan-Modules, wich works only with RedHat Linux 8 and 9, so that you can use them on all distributions and kernel versions

The sx4000 project intends to develop the vendor provided Promise sx4000 driver, to a fully operational open source driver, compatible with the latest linux kernel release.

The SBus is a family of high-speed packet-based databus standards, suitable for both networking and interdevice communication. They are optimized for high data density transactions. This project creates and documents the standards, schematics, and driver

the goal of this project is to build a stack for Lonworks Protocol and device working on this protocol

The aim of this project is to develop a modular operating system for the i386 architecture, where each device driver, file system, etc, will be a module that can be loaded and unloaded at run-time from the system.

mDriver is a utility to migrate binary device driver from Windows to Linux. It takes out the binary instruction and data from Windows driver (*.sys files), and then combine them with some supporting code to build a corresponding Linux driver module.