Search Results for "iperf-3"

...It also incorporates features roughly equivalent to font-GDOS: - a caching system so you can use more fonts for a given amount of memory, - built in bezier functions This release includes ttf2gem, a utility program that creates accurate gem fonts from a true type font (new for 2.3) Using true type fonts gives you 3 big benefits: - you can choose from a vast range of true type fonts - true type fonts are scalable so you can have almost any size font you want - true type fonts need much less disk storage than typical gem printer fonts, so even on a low spec machine you can use lots of fonts. Gem fonts and true type fonts complement each other perfectly - gem fonts are small and fast, while true type fonts are device and resolution independent so are scalable to any point size at any resolution.

CP/M Plus on ZX Spectrum +3 has ability to load device drivers from normal disk files (with .fid extension) on boot. A Spectranet device (apart from being networking interface) contains 128kB of extra RAM that can be accessed even with the Spectranet firmware disabled. This project proposes a FID driver that exposes Spectranet's extra memory as a ramdisk to the CP/M Plus system.

Firmware for a power supply with an ATMega32 uC. The hardware is based on the DCG of the ctlab project from the german magazine c't.

CP/M Plus on ZX Spectrum +3 has ability to load device drivers from normal disk files (with .fid extension) on boot. One of the most important devices for any disk operating system is the mass storage drive. Although ZXMMC device is available on the market for years and it works well with +3e firmware, partitions created on MMC cards could not be accessed from CP/M world.

JNode is a Java New Operating system Design Effort. JNode is a simple to use and install Java operating system for personal use on modern devices. Any java application runs on it, fast and safe. See our homepage for additional information.

Clicker is a project for a Multitasking Open-source operating system written from scratch. based on a modular micro kernel. We want to explore new way of designing and using OSes :) [newz: PCI, NE2K and VBE]

This project is about a light controlling system with a 4 RGB-LED channels to run different modes: • autonomously w/o PC performing HSI2RGB transformations and running through the color hues (with dimmable brightness) • remote operated by PC or embedded user software using the provided C++ Software library (based on Boost libraries) • ideal platform for color experiments with your RaspberryPi The system consists of 4 layers: • PCB with Atmel ATmega16 and FT232RL USB interface...

Schematics and micro-controller code for a version of the scoring apparatus used in competitive fencing and a compatible remote control.

Replace a Vehicle Wiring Harness with a simple CAN network and unified power distribution. Based on ATMEL AVR microcontrollers and Microchip MCP25050 CAN I/O expanders.

kbdbabel - collection of open source microcontroller based keyboard protocol translators

OpenVGA is an free and open FPGA-based implementation of a VGA compatible graphics adapter, and utilising low-cost hardware. The project includes the PCB schematic and artwork, Verilog HDL, firmware assembly code, and driver source code.

Mattise is a simple hobby operating system designed to run fast on 32-bit PCs. A newlib port will be released soon for developers to write their own programs for Mattise.

We construct a device that can receive a music stream from the network and then convert it into an audio signal. The stream is generated by a plug-in for a popular audio player on a PC.

It's a software/hardware project to turn the Atmel AVR8 controllers into something simmilar to a home-computer. Currently connecting a TV-Monitor and a keyboard is supported. It is also meant to serve as a future cheap computer alternative.

The SBus is a family of high-speed packet-based databus standards, suitable for both networking and interdevice communication. They are optimized for high data density transactions. This project creates and documents the standards, schematics, and driver

From-scratch GPL'd firmware for Razer Copperhead/MS HABU mice.

The Project represents the graphic interface of programmer for Atmel microcontrollers. Owing to flexible technology of plug-ins, the interface can be easily adapted for microcontrollers of new types. The project is written in Visual C ++ and the assembler

Agnix is an educational, network operating system kernel. It is ideal starting point to learn about operating systems. The main goal of the project is to provide a network kernel fully compatible with the Linux Kernel in the system call layer

Linux port to the Realtek RTL8181 wireless gateway SoC.

FreeSP is an infrastructure for programming platform-independend online signal processing applications. Ports to specific platforms (like DSPs and microcontrollers) are made by simply exchanging the freeSP System-module.

Tools and patches to run Linux on the IBM NetworkStation 1000 series of thin clients.

OpenTCI - A GPL-Compliant Open Source SW/HW Effort to produce quality electronic replacement/-racing Devices for Motorbikes in private or racing sports use.

CeivaLinux; Linux for the Ceiva Picture Frame!

We are currently developing our embedded TCP/IP modules, industrial ethernet systems and wireless platform for system control and data acquisition. Our main development environment is Linux and GNU tools like GCC (ASM, C, C++) and Python.

Yamit - Scalable, Portable and High Performance POSIX complaint OS. Microkernel based Operating System designed for tightly or loosely coupled multiprocessor hardware.