Search Results for "x86-rootfs"

SeaBreeze is a device driver library that provides an interface to select Ocean Optics spectrometers. It is written in C/C++ and builds and runs on Windows (XP/7/8), MacOSX, and Linux (x86/x64/ARM).

Identify sizes of memory modules installed on a Solaris, Linux, FreeBSD or HP-UX workstation or server. memconf reports the size of each SIMM/DIMM memory module installed in a system. It also reports the system type and any empty memory sockets. In verbose mode, it also reports the following information if available: - banner name, model and CPU/system frequencies - address range and bank numbers for each module

This project was originally designed to provide an open-source replacement for PPJoy. The product, at this point, consists of virtual joystick devices that is seen by the system as a standard joystick but its position-data is written to it by a feeder application. An existing feeder application that takes advantage of this product is SmartPropoPlus. If you are an application writer you can very easily write an application that controls a joystick (e.g. mouse-to-joystick,...

Sets your PC to sleep, hibernate, shutdown, or restart based on your time setting. Time may be set between 1 minute to 24 hours (in 1 minute increments). Countdown timer displays time remaining until the action occurs. This is a combined x64/x86 version. (Note: Tool is idle when time reads 0 hr:0 mins) Consider Windows 10 has changed the console "shutdown.exe" command to be active only for 30 minutes max. With DeneDown, you can extend your sleep/shutdown/hibernation period much longer, as it was in previous Windows versions. This is particularly useful when you are leaving your system to let it image the drives, but do not want to leave your PC on after completing the imaging.

Simple program that displays information about CUDA-enabled devices. The program is equipped with GPU performance test.

....* ScpToolkit is a free Windows Driver and XInput Wrapper for Sony DualShock 3/4 Controllers. Installation is fairly simple and straightforward, but does require a few things: Microsoft Windows Vista/7/8/8.1/10 x86 or amd64, Microsoft .NET Framework 4.5, Microsoft Visual C++ 2010 Redistributable Package, Microsoft Visual C++ 2013 Runtime, DirectX Runtime, Xbox 360 Controller driver (already integrated in Windows 8.x or greater), at least one supported Sony DualShock 3/4 controller and Administrator rights during driver setup.

libcpuid provides CPU identification for the x86. It wraps the CPUID and RDTSC instructions in a portable manner and provides a lot of technical info about the processor, such as vendor, core codename, features/instruction sets, cache sizes, and more.

LinK+ IDE is a simple IDE for Linux Kernel Developers and Lovers. It is based on Eclipse IDE customized for Linux kernel programming. It reduces the development time and executes code in an elegant fashion. This IDE supports Linux kernel configuration, compilation & emulation, system call development and device driver development. LinK+ IDE includes various templates in the category of character, block and network device driver subsystems for device driver development. It includes...

OpenSOC86 is an open implementation of the x86 architecture in Verilog. The current version only implements the 16-bit part (real mode). The processor is a pipelined architecture clocked at 100 MHz in a Cyclone II speed grade -6. Therefore it can be seen as similar to a 486 in real mode. Several peripherals are also implemented in a somewhat minimalistic way, but enough to be able to boot an IBM PCXT compatible bios and MSDOS 6.22.

Library for handling XBee / XBee-PRO RF modules. The library is written in C and supports the following platforms: Linux (x86, MIPSel), Windows (x86), AT91 SAM7 microcontrollers.

Dioscuri is an x86 computer hardware emulator written in Java. It is designed by the digital preservation community to make sure that documents and programs from the past can still be accessed in the future. Dioscuri is durable and component-based.

This research project is a port of the Rice University's Superpages FreeBSD prototype to the Linux 2.6 kernel for IA64, x86-64, and x86-32 processor architectures. See the wiki section for more information.

SECU86 is Standard Engine Control Unit x86. The project goal is to develop a standard computer and OS (opensource) that would work on any car. It'll be based on the x86 processor and will try to replace the poor standard ECU that comes with any car.

crowOS aims not to be a big, wide-spread OS, but only a sort of hobbie-OS of mine, mainly for fun and to learn more about what is going on "under the hood". For now, it will be based on the x86-architecture, written mainly in C but also some Assembly.

CPU Informer - CPU recognition program. A very useful tool for CPU detection. It recognizez all types of x86 CPU's including new Intel and AMD Dual Core CPUs. Also CPU Informer can work with most popular LPC SuperIO sensors.

The first true nanokernel for x86 that gives a unix prompt on a real bourne shell in respect of all security rules!

SP Tools implements the wire interface to ReefNet's Sensus Pro divelogger. It allows dive data to be downloaded, and the sampling rate to be changed. Originally called SP Tools for Linux and aimed at x86, it now supports Solaris SPARC too.

Nvidia geForce based video card drivers for Mac OS X Operating System running on x86 hardware.

lxbios is a utility for reading/writing LinuxBIOS parameters and displaying information from the LinuxBIOS table. It is intended for x86-based Linux systems (either 32-bit or 64-bit) that use LinuxBIOS.

XenOS is an "operating system to run operating systems" - a virtualization monitor. It virtualizes system hardware, so any x86 operating system will work. Support for 64-bit hosts and guests is planned. This will be similar to VMware's ESX Server.

The goal of llama-X is to be a cutting-edge desktop operating system for the x86 architecture. A new object-oriented filesystem, and a fresh new desktop paradigm, and an innovative multikernel subsystem are main features of the system.

The GDAC (Generic Device Access and Control) framework is an extensible multithreaded cross platform (Linux (x86,VME)/Windows) C++ device control environment. It typically will be used as the basis for custom OPC servers or front-end control software.