Search Results for "pxe boot server"

ipmiutil is an easy to use set of IPMI server management utilities. It can get/set sensor readings & thresholds, automate SEL management, do SOL console, etc. Supports Linux, Windows, BSD, Solaris, MacOSX. The only IPMI project tool that runs natively on Windows. See ipmiutil.sf.net for rpms, etc. (formerly called panicsel). It can run driverless in Linux for use on boot media or embedded environments.

CP/M Plus on ZX Spectrum +3 has ability to load device drivers from normal disk files (with .fid extension) on boot. A Spectranet device (apart from being networking interface) contains 128kB of extra RAM that can be accessed even with the Spectranet firmware disabled. This project proposes a FID driver that exposes Spectranet's extra memory as a ramdisk to the CP/M Plus system. Changes in v1.1: keep floppy drive motor state (as set by CP/M) when paging in Spectranet RAM (to avoid motor...

CP/M Plus on ZX Spectrum +3 has ability to load device drivers from normal disk files (with .fid extension) on boot. One of the most important devices for any disk operating system is the mass storage drive. Although ZXMMC device is available on the market for years and it works well with +3e firmware, partitions created on MMC cards could not be accessed from CP/M world. At some point it became so frustrating, I decided to write FID driver for it. It's not perfect, but it works surprisingly...

Clicker is a project for a Multitasking Open-source operating system written from scratch. based on a modular micro kernel. We want to explore new way of designing and using OSes :) [newz: PCI, NE2K and VBE]

This project's goal was to develop an open source firmware for Sinus 154 DSL Basic SE and similar AR7 based devices. Projektziel war die Entwicklung einer freien Firmware für Sinus 154 DSL Basic SE und vergleichbare Geräte mit AR7-Prozessor.

Minirighi is a multi-threading open-source operating system written for didactic purpose. It has been written from scratch and it is compatible with POSIX.

The goal of llama-X is to be a cutting-edge desktop operating system for the x86 architecture. A new object-oriented filesystem, and a fresh new desktop paradigm, and an innovative multikernel subsystem are main features of the system.

Embedded PowerPC Bootloader Project, especially for Embedded PowerPC boards. The code for this project is frozen. Development continues with the "U-Boot" project (Universal Boot Loader, see http://sourceforge.net/projects/u-boot ).

Open source utility to (re)program flash BIOS chips. Initial support will be for the i-opener network appliance under Qnx since there is an immediate need.