Search Results for "decision support system"
Sort By:
Showing 278 open source projects for "decision support system"
View related business solutions-
Our Free Plans just got better! | Auth0You asked, we delivered! Auth0 is excited to expand our Free and Paid plans to include more options so you can focus on building, deploying, and scaling applications without having to worry about your security. Auth0 now, thank yourself later.
-
Automate contact and company data extractionGenerate leads at scale without building or maintaining scrapers. Use 10,000+ ready-made tools that handle authentication, pagination, and anti-bot protection. Pull data from business directories, social profiles, and public sources, then export to your CRM or database via API. Schedule recurring extractions, enrich existing datasets, and integrate with your workflows.
-
1
Lenovo Legion Linux Support
Driver and tools for controlling Lenovo Legion laptops in Linux
Lenovo Legion Linux (LLL) brings additional drivers and tools for Lenovo Legion series laptops to Linux. It is the alternative to Lenovo Vantage or Legion Zone (both Windows only). It allows you to control features like the fan curve, power mode, power limits, rapid charging, and more. This has been achieved through reverse engineering and disassembling the ACPI firmware, as well as the firmware and memory of the embedded controller (EC). -
2
Arduino core support for STM32
STM32 core support for Arduino
This repo adds the support of STM32 MCU in Arduino IDE. This porting is based on STM32Cube MCU Packages including the HAL hardware abstraction layer, enabling portability between different STM32 devices via standardized API calls. The Low-Layer (LL) APIs, a lightweight, optimized, expert-oriented set of APIs designed for both performance and runtime efficiency. CMSIS device definition for STM32. Arduino.cc IDE allows to add easily new board thanks the "Boards Managers". More information... -
3
Betaflight
Open Source Flight Controller Firmware
Betaflight is flight controller software (firmware) used to fly multi-rotor craft and fixed wing craft. This fork differs from Baseflight and Cleanflight in that it focuses on flight performance, leading-edge feature additions, and wide target support. Betaflight supports a wide range of flight controllers with at least an STM32F4 MCU. You can use nearly any piece of modern hardware out there. Full telemetry and high refresh rate for receivers, camera and VTX control, RGB LEDs, and much... -
4
Linux GPIB Support
Linux GPIB Driver package (source)
The Linux GPIB Package is a support package for GPIB (IEEE 488.2) hardware. The package contains a development environment consisting of a GPIB library written in C, kernel driver modules, and bindings for several other languages. -
Nonprofit Budgeting SoftwareMartus' collaborative and easy-to-use budgeting and reporting platform will save you hundreds of hours each year. It's designed to make the entire budgeting process easier and create unlimited financial transparency.
-
5
Lan Mouse
mouse & keyboard sharing via LAN
Lan Mouse is a mouse and keyboard-sharing software similar to universal control on Apple devices. It allows for using multiple PCs with a single set of mouse and keyboard. This is also known as a Software KVM switch. The primary target is Wayland on Linux but Windows MacOS and Linux on Xorg have partial support as well (see below for more details). Focus lies on performance and a clean, manageable implementation that can easily be expanded to support additional backends like e.g. Android, iOS. -
6
Tasmota
Alternative firmware for ESP8266 with easy configuration
Alternative firmware for ESP8266 with easy configuration using webUI, OTA updates, automation using timers or rules, expandability and entirely local control over MQTT, HTTP, Serial or KNX. Unless your Tasmota powered device exhibits a problem or you need to make use of a feature that is not available in the Tasmota version currently installed on your device, leave your device alone - it works so don't make unnecessary changes! If the release version (i.e., the master branch) exhibits... -
7
Fan Control
Highly customizable fan controlling software for Windows
Fan Control is a Windows utility designed to give users fine-grained, customizable control over system fans (CPU, GPU, case, etc.) based on temperature and sensor inputs. Rather than relying solely on BIOS fan curves, it allows dynamic adjustment of fan behaviour at the operating-system level — letting you react to real-time load, mix multiple sensors (CPU, GPU, motherboard, drives, etc.), and define custom fan-speed curves for different situations. The tool supports both manual mode (user... -
8
Flipper Zero Unleashed Firmware
Flipper Zero Unleashed Firmware
Flipper Zero Unleashed Firmware. This software is for experimental purposes only and is not meant for any illegal activity/purposes. We do not condone illegal activity and strongly encourage keeping transmissions to legal/valid uses allowed by law. Also, this software is made without any support from Flipper Devices and is in no way related to the official devs. -
9
FanCtrl
FanCtrl allows you to automatically control the fan speed
FanCtrl is a Windows desktop utility focused on automatically controlling PC fan speeds using temperature sensors and customizable fan curves, so your cooling behavior matches how you actually use your system. It combines monitoring and control in one place, letting you view temperatures, fan RPM, and control percentages while you tune how aggressively each fan responds. The project supports a range of control backends and integrations, including motherboard fan headers and several popular... -
Reach Your Audience with Rise Vision, the #1 Cloud Digital Signage Software SolutionRise Vision is the #1 digital signage company, offering easy-to-use cloud digital signage software compatible with any player across multiple screens. Forget about static displays. Save time and boost sales with 500+ customizable content templates for your screens. If you ever need help, get free training and exceptionally fast support.
-
10
NeoPixelBus
An Arduino NeoPixel support library
An Arduino NeoPixel support library supports a large variety of individually addressable LEDs. Please refer to the Wiki for more details. Please use the gitter channel to ask questions as the GitHub Issues feature is used for bug tracking. A library to control one wire protocol RGB and RGBW LEDs like APA106, SK6812, WS2811, WS2812, and WS2813 that are commonly referred to as NeoPixels and two-wire protocol RGB like Lpd8806, APA102, and SK9822 commonly referred to as DotStars. Supports most... -
11
Ralph
Ralph is the CMDB / Asset Management system for data center
...REST API, Workflows code extensions allow for easy customization. We've chosen the best features of DCIM, Asset Mgmt and CMDB systems to create one, easy and well-integrated system. One interface is easier than 3. Keep track of assets purchases and their life cycle. Flexible flow system for assets life cycle. Data center and back office support. DC visualization built-in. Ralph is a simple yet powerful Asset Management, DCIM and CMDB system for data center and back office. -
12
Steam Deck Tools
Fan, Overlay, Power Control and Steam Controller for Windows
...Because this software interacts with low-level system controls, its use carries some risk of instability, and it’s provided on a best-effort basis with documentation on installation and troubleshooting. -
13
MongoDB Go Driver
The Go driver for MongoDB
The MongoDB supported driver for Go. The recommended way to get started using the MongoDB Go driver is by using go modules to install the dependency in your project. This can be done either by importing packages from go.mongodb.org/mongo-driver and having the build step install the dependency. When using a version of Go that does not support modules, the driver can be installed using dep. To get started with the driver, import the mongo package and create a mongo.Client with the Connect... -
14
Redshift JDBC Driver
Redshift JDBC Driver. It supports JDBC 4.2 specification
The Amazon JDBC Driver for Redshift is a Type 4 JDBC driver that provides database connectivity through the standard JDBC application program interfaces (APIs) available in the Java Platform, Enterprise Editions. The Driver provides access to Redshift from any Java application, application server, or Java-enabled applet. It builds redshift-jdbc42-{version}.jar and redshift-jdbc42-{version}.zip files under target directory. The jar file is the Redshift JDBC driver.The zip file contains the... -
15
AlienFX Tools
Alienware systems lights, fans, and power control tools and apps
...Enthusiasts use it to tailor lighting aesthetics and system responsiveness, especially on systems where official Alienware control panels are unavailable or problematic. -
16
TuxClocker
Qt overclocking tool for GNU/Linux
TuxClocker is an open-source Qt-based overclocking and hardware monitoring utility tailored for GNU/Linux systems. The project combines a DBus daemon with a Qt graphical user interface, allowing users to inspect and adjust performance characteristics of their hardware—particularly GPUs—under Linux. TuxClocker provides a user-friendly GUI atop lower-level interfaces, making it easier to control clock speeds, fan behavior, and other tuning parameters without resorting exclusively to... -
17
Macs Fan Control
Control fans on Apple computers
Macs Fan Control is an open-source repository supporting the development of Macs Fan Control, a powerful macOS utility that gives users granular control over the thermal behavior of Apple computers. While the GitHub repo primarily tracks issues, feature requests, and localization files for the application, the utility itself allows real-time monitoring and control of fan speeds based on temperature sensors, helping users balance cooling performance and acoustics. It supports a wide range of... -
18
Project MINI RACK
Miniature rack builds, for portable or compact Homelabs
Project MINI RACK is a project dedicated to designing, documenting, and showcasing compact, portable rack-mount or small-form factor “mini” labs, suitable for home labs, edge deployments, or mobile network stacks. The repository contains build guides, hardware lists, layout ideas (10” wide racks, 1U/2U modules, custom shelves), 3D printable components, and real-world examples of mini homelab rigs. Its goal is to help hobbyists, devops engineers, or tinkerers understand how to build... -
19
Radeon-ID
Official Mirror for AMD Domestic Community Drivers Indonesia
AMD Domestic Community Driver with Multi-Kernel Radeon Driver Release Experience enhanced performance and flexibility with our multi-kernel Radeon driver, tailored for the AMD community. 📢 Need help or have questions? Join our 24/7 Discord support channel for real-time assistance and discussions: https://discord.gg/rdnid -
20
This project delivers Linux support (USB driver and Tools) for a Digital Signal Processor (DSP) cards of the Signal Ranger series, see http://www.softdb.com/product_dsp.shtml for details) connected to a Linux host via USB.
-
21
HP Linux Imaging and Printing
Hewlett-Packard's Linux imaging and printing software
The Hewlett-Packard Linux Imaging and Printing Project provides a unified single and multi-function connectivity solution for Linux. For support and help, please visit https://launchpad.net/hplip -
22
LIRC
Linux Infrared Remote Control
LIRC is a package that supports receiving and sending IR signals of IR remote controls, adding functionality and flexibility to the basic support in the Linux kernel. Support for LIRC is ubiquitous in Linux HTPC applications; it's also packaged in all major Linux distributions. Despite it's name, LIRC also works on OSX. -
23
OpenOCD - Open On-Chip Debugger
The Open On-Chip Debugger
The "Open On-Chip Debugger" provides JTAG/SWD access from GDB (or directly with TCL scripts) to processors with ARM and MIPS based cores. See website for full list of supported targets. -
24
Arduino ASCOM Focuser Pro2 DIY
Version 2 of the myFocuser Project
myFocuserPro2 (myFP2) is an ASCOM - INDI - LINUX - WINDOWS telescope focuser with a large range of options. 309,000+ file downloads. The most popular focuser project. (c) Copyright Robert Brown 2014-2025. All Rights Reserved. Code or portions of code may not be copied or used without written permission from the author. Other Focuser Projects myFP2ESP32 WiFi - https://sourceforge.net/projects/myfocuserpro2-esp32/ [ESP32 Only] myFP2ESP8266 WiFi - ... -
25
Arduino mySQM Sky Quality Meter
mySQM powered by Arduino Nano
A sky quality meter based on TLS237 and Arduino Nano. (c) Copyright Robert Brown 2014-2024. All Rights Reserved. Code or portions of code may not be copied or used without appropriate credit given to author. For a WiFi ESP32 much improved version please see https://sourceforge.net/projects/mysqmproesp32/ AUTHOR NOTE: HIGHLY RECOMMEND YOU USE AN ARDUINO MEGA FOR THIS PROJECT IF ALL OPTIONS ARE CHOSEN YOU CAN RUN OUT OF CODE SPACE ON A NANO
