Search Results for "decision support system"
Sort By:
Showing 76 open source projects for "decision support system"
View related business solutions-
Our Free Plans just got better! | Auth0You asked, we delivered! Auth0 is excited to expand our Free and Paid plans to include more options so you can focus on building, deploying, and scaling applications without having to worry about your security. Auth0 now, thank yourself later.
-
Atera all-in-one platform IT management software with AI agentsAtera’s AI agents don’t just assist, they act. From detection to resolution, they handle incidents and requests instantly, taking your IT management from automated to autonomous.
-
1
Lenovo Legion Linux Support
Driver and tools for controlling Lenovo Legion laptops in Linux
Lenovo Legion Linux (LLL) brings additional drivers and tools for Lenovo Legion series laptops to Linux. It is the alternative to Lenovo Vantage or Legion Zone (both Windows only). It allows you to control features like the fan curve, power mode, power limits, rapid charging, and more. This has been achieved through reverse engineering and disassembling the ACPI firmware, as well as the firmware and memory of the embedded controller (EC). -
2
Arduino core support for STM32
STM32 core support for Arduino
This repo adds the support of STM32 MCU in Arduino IDE. This porting is based on STM32Cube MCU Packages including the HAL hardware abstraction layer, enabling portability between different STM32 devices via standardized API calls. The Low-Layer (LL) APIs, a lightweight, optimized, expert-oriented set of APIs designed for both performance and runtime efficiency. CMSIS device definition for STM32. Arduino.cc IDE allows to add easily new board thanks the "Boards Managers". More information... -
3
Betaflight
Open Source Flight Controller Firmware
Betaflight is flight controller software (firmware) used to fly multi-rotor craft and fixed wing craft. This fork differs from Baseflight and Cleanflight in that it focuses on flight performance, leading-edge feature additions, and wide target support. Betaflight supports a wide range of flight controllers with at least an STM32F4 MCU. You can use nearly any piece of modern hardware out there. Full telemetry and high refresh rate for receivers, camera and VTX control, RGB LEDs, and much... -
4
Lan Mouse
mouse & keyboard sharing via LAN
Lan Mouse is a mouse and keyboard-sharing software similar to universal control on Apple devices. It allows for using multiple PCs with a single set of mouse and keyboard. This is also known as a Software KVM switch. The primary target is Wayland on Linux but Windows MacOS and Linux on Xorg have partial support as well (see below for more details). Focus lies on performance and a clean, manageable implementation that can easily be expanded to support additional backends like e.g. Android, iOS. -
Cloud tools for web scraping and data extractionAutomate web data collection with cloud tools that handle anti-bot measures, browser rendering, and data transformation out of the box. Extract content from any website, push to vector databases for RAG workflows, or pipe directly into your apps via API. Schedule runs, set up webhooks, and connect to your existing stack. Free tier available, then scale as you need to.
-
5
Tasmota
Alternative firmware for ESP8266 with easy configuration
Alternative firmware for ESP8266 with easy configuration using webUI, OTA updates, automation using timers or rules, expandability and entirely local control over MQTT, HTTP, Serial or KNX. Unless your Tasmota powered device exhibits a problem or you need to make use of a feature that is not available in the Tasmota version currently installed on your device, leave your device alone - it works so don't make unnecessary changes! If the release version (i.e., the master branch) exhibits... -
6
Flipper Zero Unleashed Firmware
Flipper Zero Unleashed Firmware
Flipper Zero Unleashed Firmware. This software is for experimental purposes only and is not meant for any illegal activity/purposes. We do not condone illegal activity and strongly encourage keeping transmissions to legal/valid uses allowed by law. Also, this software is made without any support from Flipper Devices and is in no way related to the official devs. -
7
NeoPixelBus
An Arduino NeoPixel support library
An Arduino NeoPixel support library supports a large variety of individually addressable LEDs. Please refer to the Wiki for more details. Please use the gitter channel to ask questions as the GitHub Issues feature is used for bug tracking. A library to control one wire protocol RGB and RGBW LEDs like APA106, SK6812, WS2811, WS2812, and WS2813 that are commonly referred to as NeoPixels and two-wire protocol RGB like Lpd8806, APA102, and SK9822 commonly referred to as DotStars. Supports most... -
8
Ralph
Ralph is the CMDB / Asset Management system for data center
...REST API, Workflows code extensions allow for easy customization. We've chosen the best features of DCIM, Asset Mgmt and CMDB systems to create one, easy and well-integrated system. One interface is easier than 3. Keep track of assets purchases and their life cycle. Flexible flow system for assets life cycle. Data center and back office support. DC visualization built-in. Ralph is a simple yet powerful Asset Management, DCIM and CMDB system for data center and back office. -
9
Redshift JDBC Driver
Redshift JDBC Driver. It supports JDBC 4.2 specification
The Amazon JDBC Driver for Redshift is a Type 4 JDBC driver that provides database connectivity through the standard JDBC application program interfaces (APIs) available in the Java Platform, Enterprise Editions. The Driver provides access to Redshift from any Java application, application server, or Java-enabled applet. It builds redshift-jdbc42-{version}.jar and redshift-jdbc42-{version}.zip files under target directory. The jar file is the Redshift JDBC driver.The zip file contains the... -
Grafana: The open and composable observability platformGrafana is the open source analytics & monitoring solution for every database.
-
10
Macs Fan Control
Control fans on Apple computers
Macs Fan Control is an open-source repository supporting the development of Macs Fan Control, a powerful macOS utility that gives users granular control over the thermal behavior of Apple computers. While the GitHub repo primarily tracks issues, feature requests, and localization files for the application, the utility itself allows real-time monitoring and control of fan speeds based on temperature sensors, helping users balance cooling performance and acoustics. It supports a wide range of... -
11
Project MINI RACK
Miniature rack builds, for portable or compact Homelabs
Project MINI RACK is a project dedicated to designing, documenting, and showcasing compact, portable rack-mount or small-form factor “mini” labs, suitable for home labs, edge deployments, or mobile network stacks. The repository contains build guides, hardware lists, layout ideas (10” wide racks, 1U/2U modules, custom shelves), 3D printable components, and real-world examples of mini homelab rigs. Its goal is to help hobbyists, devops engineers, or tinkerers understand how to build... -
12
WLan Driver 802.11n Rel. 4.80.28.7.zip is a compressed file containing drivers for a wireless network adapter that supports the 802.11n Wi-Fi standard. These drivers enable your computer to communicate with and control the Wi-Fi hardware, allowing it to connect to wireless networks. To install it, you would unzip the file and run the installer or manually update the driver through your system’s device manager. The WLan Driver 802.11n Rel. 4.80.28.7.zip is typically for wireless network...
-
13
Drive Health Analyzer - SSD/HDD Monitor
Monitor disk health, predict failures, track SSD/HDD SMART attributes
Drive Health Analyzer is a comprehensive disk monitoring solution designed to prevent data loss by tracking the health status of SSDs and HDDs. The software reads SMART attributes, monitors temperature, analyzes disk performance, and predicts potential drive failures before they occur. It supports all major storage types including NVMe, SATA, and IDE drives. Features real-time alerts, detailed health reports, and automatic background monitoring. The intuitive dashboard displays critical... -
14
Logitech-G HUB
Unlock full potential with G HUB! Customize Logitech G gear
Unlock full potential with G HUB! Customize Logitech G gear mouse, keyboard, headset, webcam settings. Create and share profiles for optimal gaming. -
15
BRL-CAD
Open Source Solid Modeling CAD
BRL-CAD is a powerful cross-platform constructive solid geometry solid modeling system that includes an interactive geometry editor, ray-tracing for rendering & geometric analyses, network distributed framebuffer support, image & signal-processing tools. -
16
JxMake
A Java-based cross-platform build system.
...Full support for building desktop applications is planned for future development. Building JxMake requires Java SDK 8 or later (note that Java SDK 8 is a Long-Term Support version). -
17
SeaBreeze
Open-source cross-platform spectrometer device driver
SeaBreeze is a device driver library that provides an interface to select Ocean Optics spectrometers. It is written in C/C++ and builds and runs on Windows (XP/7/8), MacOSX, and Linux (x86/x64/ARM). -
18
GeigerLog
Python program for Geiger counters and Environmental Sensors
GeigerLog is a combination of data logger, presenter, and analyzer, and is now released in version 2.1! Based on Python (Version 3), it runs on Linux, Windows, Macs, Raspberry Pi, and other. GeigerLog is WiFi-enabled for servers and clients; it can be monitored by SmartPhone. Initially developed for Geiger counters, it is now a more universal tool, which equally well handles data like temperature, air-pressure, humidity, CO2. Continues to support Geiger counters like GQ Electronic's... -
19
DarkLight Cover/Calibrator
DIY project to build a cover, flat panel or combo flip-flat panel
The DarkLight Cover/Calibrator (DLC) is a DIY project to build a motorized telescope cover, flat panel, or a combination flip-flat system. Its modular design supports various setups: a 12V light panel without a servo for a wall-mounted calibration panel, a servo-only cover for sky flats, or both integrated into a flip-flat mechanism. The DLC also includes optional dew heating to reduce extra equipment and cabling. With available drivers, it works with ASCOM or INDI. We’re excited to... -
20
blinker-library
An IoT Solution,Blinker library for embedded hardware
Blinker library for embedded hardware. Works with Arduino, ESP8266, ESP32. When we learn new embedded hardware, we usually started with the sketch Blink. We think Blink is the hello world of embedded hardware. We aim to build an easy learn IoT solution project, which is like Blink a led. So we named this project blinker with this inspiration. blinker is a cross-hardware, cross-platform solution for the IoT. It provides APP, device, and server support, and uses public cloud services for data... -
21
Zabbix-HDD
Zabbix extension that reports various HDD status using various tools
This extension uses not only smartctl (smartmontools) but other available tools to determine the existance of an HDD and as much as possible of its status. As a Zabbix "auto-discovery" process, these results can reflect changes in available HDD in near-to-real-time. -
22
ESP8266 Arduino Core
ESP8266 core for Arduino
ESP8266 Arduino Core is the Arduino core for the ESP8266 WiFi chip. It brings support for the ESP8266 chip to the Arduino environment, allowing you to write sketches, use familiar Arduino functions and libraries, and run these directly on ESP8266 without the need for an external microcontroller. ESP8266 Arduino core comes with libraries that enable it to perform a number of things. It can communicate over WiFi through the use of TCP and UDP; it can set up HTTP, mDNS, SSDP, and DNS... -
23
IIDC Camera Control Library
Capture and control API for IIDC compliant cameras
libdc1394 is a library that provides a high level programming interface for application developers who wish to control and capture streams from IEEE 1394 based cameras that conform to the 1394-based Digital Camera Specifications (also known as the IIDC or DCAM Specifications). libdc1394 also supports some USB cameras that are IIDC compliant. Besides capture and control, libdc1394 provides a full set of colour space conversion functions (including RAW decoding), vendor specific functions... -
24
HelloWord-Smart Keyboard
High-end modular keyboard platform with deep customizability
HelloWord-Keyboard is a high-end modular keyboard platform where both the hardware and firmware are designed from scratch to provide deep customizability and advanced features. The project comprises a main keyboard PCB (STM32F103), a dynamic module (STM32F405) with additional features like an e-ink screen, OLED display and a haptic/motorized knob, a base/dock module with USB hub functionality, and other supporting PCBs. The firmware includes high-speed scanning of keystrokes, RGB lighting... -
25
xBridge - I2C/SMBus GUI
USB Bridge for SMBus/I2C, GPIO, & Clock
[Introduction] The xBridge-M01 product is a multifunctional USB bridge developed by Doidx. It can control and transmit SMBus/I2C, GPIO, Clock and other interfaces through USB. The product includes software and hardware. It has the characteristics of easy use and development. The core chip is CP2112 Graphical software and operating manual can be downloaded for free at http://xbridge-m01.doidx.com Provide the underlying Java API, http://xsmbus-m01.doidx.com , which can do simple...
