Search Results for "using"
Sort By:
Showing 72 open source projects for "using"
View related business solutions-
Outgrown Windows Task Scheduler?Windows Task Scheduler wasn't built for complex, cross-platform automation. Get a free diagnostic that shows exactly where things are failing and provides remediation recommendations. Interactive HTML report delivered in minutes.
-
Atera all-in-one platform IT management software with AI agentsAtera’s AI agents don’t just assist, they act. From detection to resolution, they handle incidents and requests instantly, taking your IT management from automated to autonomous.
-
1
MongoDB NodeJS Driver
The MongoDB Node.js driver
The MongoDB Node.js driver allows Node.js applications to connect to MongoDB and work with data. The driver features an asynchronous API which allows you to interact with MongoDB using Promises or via traditional callbacks. Whether you are new to MongoDB or you just want to brush up on the core concepts, you can check out the Fundamentals section which features material on using the Node.js driver. The connection URI is the set of instructions that the driver uses to connect to a MongoDB deployment. It instructs the driver on how it should connect to MongoDB and how it should behave while connected. ... -
2
GeigerLog
Python program for Geiger counters and Environmental Sensors
...Continues to support Geiger counters like GQ Electronic's GMC-300/500/600 , RadMon, RadPro, Gamma-Scout, audio-click and other low-cost Geiger counters, IoT devices, I2C based sensors, GQ EMF devices. GeigerLog reads data from devices, saves them to databases, prints to screen and plots as auto-updated, customizable graphs. Quality control using Statistics, Scatter, Poisson, FFT & Autocorrelation, and more. Gamma Spectra - can be displayed, calibrated, and evaluated in GeigerLog! The Raspberry Pi 4, 5 qualify as GeigerLog hosts. -
3
Drive Health Analyzer - SSD/HDD Monitor
Monitor disk health, predict failures, track SSD/HDD SMART attributes
Drive Health Analyzer is a comprehensive disk monitoring solution designed to prevent data loss by tracking the health status of SSDs and HDDs. The software reads SMART attributes, monitors temperature, analyzes disk performance, and predicts potential drive failures before they occur. It supports all major storage types including NVMe, SATA, and IDE drives. Features real-time alerts, detailed health reports, and automatic background monitoring. The intuitive dashboard displays critical... -
4
San-Libs
Fixes the scanner error / Corrige les erreurs du scanner
[En] San-Libs fix the device detection error when the scanner driver is already installed in the Linux systems using the Sane backends. San-Libs utility will verify the Sane libraries and set the configuration files to detect your scanner. [Fr] San-Libs corrige l’érreur de détection du scanner alors que le pilote est installé sur les systèmes Linux qui utilisent les back-end de Sane. L’utilitaire San-Libs va vérifier les librairies et reconfigurer les fichiers de Sane pour détecter votre scanner. -
Retool your internal operationsBuild internal software that meets enterprise security standards without waiting on engineering resources. Retool connects to your databases, APIs, and data sources while maintaining the permissions and controls you need. Create custom dashboards, admin tools, and workflows from natural language prompts—all deployed in your cloud with security baked in. Stop duct-taping operations together, start building in Retool.
-
5
PBMaster is a software implementation of Profibus protocol (IEC 61158) compatible master node. The objective is to provide open implementation for education, experiments, enthusiasts and also to open way to its use in low-cost applications by using common hardware and open-source software. For documentation see http://pbmaster.sourceforge.net/ .
-
6
antimicro
Graphical program to map keyboard and mouse controls to a gamepad
antimicro is a graphical program used to map keyboard keys and mouse controls to a gamepad. It's useful for using a gamepad on PC games that do not have any form of built-in gamepad support. This program can also be used to control any desktop application with a gamepad. On Linux, this means that your system has to be running an X environment in order to run this program. This program currently works with various Linux distributions, Windows (Vista and later), and FreeBSD, but with limited support for FreeBSD and Windows XP. -
7
Barrier
Open-source KVM software
Barrier is a software that works just like a KVM (keyboard, video and mouse) switch, which allows you to use a single mouse and keyboard to control several different computers by physically turning a dial on the box to switch the machine you're controlling at any given time. Barrier is able to do this in software, giving you control over different machines by simply moving your mouse to the edge of the screen, or by using a keypress to switch focus to a different system. Barrier was built to be simple and reliable, allowing you to control a different machine by simply using your mouse and keyboard from another. It works on all major operating systems (Linux, Windows, MacOS/OS X), including FreeBSD and OpenBSD. -
8
KL-G2 Printer Utility
Casio KL-G2 Printing for Linux
This program prints a PBM file using a Casio KL-G2 Label Printer connected via USB on Linux. Also supports manual feed/cut and controls most of the printer options. -
9
CUPS back-end for the canon printers using the proprietary USB over IP BJNP protocol. This back-end allows Cups to print over the network to a Canon printer. The design is based on reverse engineering of the protocol. Version 2.0 adds ink-level reporting and improved out-of-paper detection. Version 2.0.1 is now released under GPLv2 or later to be compatible with the changed cups license.
-
Dun and Bradstreet Risk Analytics - Supplier IntelligenceRisk, procurement, and compliance teams across the globe are under pressure to deal with geopolitical and business risks. Third-party risk exposure is impacted by rapidly scaling complexity in domestic and cross-border businesses, along with complicated and diverse regulations. It is extremely important for companies to proactively manage their third-party relationships. An AI-powered solution to mitigate and monitor counterparty risks on a continuous basis, this cutting-edge platform is powered by D&B’s Data Cloud with 520M+ Global Business Records and 2B+ yearly updates for third-party risk insights. With high-risk procurement alerts and multibillion match points, D&B Risk Analytics leverages best-in-class risk data to help drive informed decisions. Perform quick and comprehensive screening, using intelligent workflows. Receive ongoing alerts of key business indicators and disruptions.
-
10
EtherCard
EtherCard is an IPv4 driver for the ENC28J60 chip
EtherCard is a driver for the Microchip ENC28J60 chip, compatible with Arduino IDE. It is adapted and extended from code written by Guido Socher and Pascal Stang. High-level routines are provided to allow a variety of purposes including simple data transfer through to HTTP handling. Non-AVR boards are NOT currently supported (101/Zero/Due) #211 Hardware: Depending on the size of the buffer for packets, this library uses about 1k of Arduino RAM. Large strings and other global variables can... -
11
PK2Aux is a library and suite of command-line utilities for using the Microchip PICkit2 programmer device for purposes other than programming (such as the generic pin controls, serial UART, and logic analyzer modes provided by the Windows software).
-
12
liblabpro
Open-source access to Vernier LabPro devices
...It is currently in an early work-in-progress stage and is not affiliated with Vernier in any way. As a test case, it also includes a basic program, labpro-console, for communicating with a LabPro using its plaintext command system. -
13
A Linux port of the OpenBSD/FreeBSD Cryptographic Framework (OCF). This port aims to bring full asynchronous HW/SW crypto acceleration to the Linux kernel, OpenSwan, OpenSSL and applications using DES, 3DES, AES, MD5, SHA, PublicKey, RNGs and more.
-
14
Cortex GNAT Run Time Systems
Supports writing Ada software for Cortex-M3, M4F boards
...It is intended that releases will allow the development of proprietary software (by the use of the GCC Runtime Library exception for project-developed code, and by only using manufacturer’s software where the same permission applies). -
15
USBphpTunnel
Android app for MXQ TVbox to control an Arduino board via USB from PHP
...To keep ligth the Arduino Sketch, you can port all not realtime logic to PHP side. At the end your application will works on XQ+Arduino UNO even 24/7 with only 20 Watt AC power, and can be controlled by smartphone via WiFi or from Internet using some free dynamic IP. What more? Enjoy. Sources in github https://github.com/msillano/USBphpTunnel Preconditions: MXQ + Palapa Web server, Arduino UNO Install: - Download USBphpTunnel11_d.apk and the full test_files dir - See file /test_files/readme.txt -
16
i-nex
i-nex system hardware lister
I-Nex is an application that gathers information for hardware components available on your system and displays it using an user interface similar to the popular Windows tool CPU-Z. -
17
pyhard2, control hardware from python
An object-oriented framework for the development of instrument drivers
...Emphasis is given on serial drivers but the framework can be used with any socket. The source also contains the implementation of a PID controller and a setpoint ramp generator. The instrument drivers may further be incorporated in a GUI, using, e.g. PyQt or PySide. Threading is automatically taken care of. Furthermore, generic GUI (called controllers) are provided and can be extended. -
18
Xorg X11 dialbox input driver
The Xfree-independent Xorg X11 input driver for the SGI dialbox
This driver allows using the SGI dialbox on linux systems, which lack the Xfree86 library. Users of Redhat EL/Fedora/Centos 64 bit machines may use the rpm to install the driver. Other users currently need to compile the driver source code and install the driver manually. This driver is based on source code available from https://sourceforge.net/projects/dialbox/. -
19
Note: The project has moved to https://github.com/pyhys/minimalmodbus The files available here are very old, download from Github instead. MinimalModbus is an easy-to-use Python module for talking to instruments (slaves) from a computer (master) using the Modbus protocol, and is intended to be running on the master. Example code includes drivers for Eurotherm and Omega process controllers. The only dependence is the pySerial module (also pure Python). This software supports the ‘Modbus RTU’ and ‘Modbus ASCII’ serial communication versions of the protocol, and is intended for use on Linux, OS X and Windows platforms. ...
-
20
ztex is a Firmware Kit with a corresponding Driver API for EZ-USB based hardware. The Firmware is written in C and assembled using a powerful macro processor. The Driver API allows the development of platform-independent device drivers.
-
21
Open Source Linux driver for wireless network cards (DWL-[G]520+ PCI, DWL-[G]650+ CardBus, GL-2422MP mini-PCI, DWL-120+ USB etc.) which use the entirely undocumented Texas Instruments (TI) ACX100/ACX111 chips, for 2.4.x , 2.6.x to 3.x kernels. FreeBSD: see some other website (FIXME URL got clipped). !! BIG FAT NOTE: development (i.e., driver "releases") is happening in git source repository tree (as of 2011-09-04), thus you're expected to look there (see web site menu Code --> Git) !!
-
22
-
23
Schlangenaufbewahrungsbehälter
A Deliberately Non-Object-Oriented Python Interface to COMEDI
aka: Schlang - A Deliberately Non-Object-Oriented Python Interface to COMEDI COMEDI datatypes and functions are replicated though this interface using the Python ctypes library. This allows the user to interface directly with comedi-lib though the comfortable interface of a Python interpreter.Object-Orientation of the interface is deliberately not provided so the coding style will loosely mimic C -- in this way, Schlang can be used to prototype and debug complex programs that will later be written in C. -
24
Library and userspace programs to control Samsung SyncMaster/MXn, Sony PUD, and other monitors from software, using the monitor-specific serial protocols.
-
25
Backend to control HP Scanjet 3900 series scanners in linux (hp3800, hp3970, hp4070, hp4370 and those which use RTS8822 chipset). Written in C, using libusb libraries, it runs as stand-alone application and integrated in SANE project.
