Search Results for "using"
Sort By:
Showing 189 open source projects for "using"
View related business solutions-
AI-generated apps that pass security reviewRetool lets you generate dashboards, admin panels, and workflows directly on your data. Type something like “Build me a revenue dashboard on my Stripe data” and get a working app with security, permissions, and compliance built in from day one. Whether on our cloud or self-hosted, create the internal software your team needs without compromising enterprise standards or control.
-
Outgrown Windows Task Scheduler?Windows Task Scheduler wasn't built for complex, cross-platform automation. Get a free diagnostic that shows exactly where things are failing and provides remediation recommendations. Interactive HTML report delivered in minutes.
-
1
Betaflight
Open Source Flight Controller Firmware
...You can use nearly any piece of modern hardware out there. Full telemetry and high refresh rate for receivers, camera and VTX control, RGB LEDs, and much more! Run the configurator on any device, whether it is using Windows, MacOS, Linux, or Android. With the Betaflight OSD you can get all relevant flight metrics directly into your FPV video feed. An easy-to-use drag-and-drop configuration allows the placement of values like used mAh and LiPo Voltage readings. Additionally, you can change most firmware settings using stick commands without even removing your goggles. -
2
Tasmota
Alternative firmware for ESP8266 with easy configuration
Alternative firmware for ESP8266 with easy configuration using webUI, OTA updates, automation using timers or rules, expandability and entirely local control over MQTT, HTTP, Serial or KNX. Unless your Tasmota powered device exhibits a problem or you need to make use of a feature that is not available in the Tasmota version currently installed on your device, leave your device alone - it works so don't make unnecessary changes! -
3
Lenovo Legion Linux Support
Driver and tools for controlling Lenovo Legion laptops in Linux
Lenovo Legion Linux (LLL) brings additional drivers and tools for Lenovo Legion series laptops to Linux. It is the alternative to Lenovo Vantage or Legion Zone (both Windows only). It allows you to control features like the fan curve, power mode, power limits, rapid charging, and more. This has been achieved through reverse engineering and disassembling the ACPI firmware, as well as the firmware and memory of the embedded controller (EC). -
4
libusb
A cross-platform library to access USB devices
...It is written in C (Haiku backend in C++) and licensed under the GNU Lesser General Public License version 2.1 or, at your option, any later version. libusb is a C library that provides generic access to USB devices. It is intended to be used by developers to facilitate the production of applications that communicate with USB hardware. Using a single cross-platform API, it provides access to USB devices on Linux, macOS, Windows, etc. No special privilege or elevation is required for the application to communicate with a device. All versions of the USB protocol, from 1.0 to 3.1 (latest), are supported. libusb is abstracted internally in such a way that it can hopefully be ported to other operating systems. -
Atera all-in-one platform IT management software with AI agentsAtera’s AI agents don’t just assist, they act. From detection to resolution, they handle incidents and requests instantly, taking your IT management from automated to autonomous.
-
5
Lan Mouse
mouse & keyboard sharing via LAN
Lan Mouse is a mouse and keyboard-sharing software similar to universal control on Apple devices. It allows for using multiple PCs with a single set of mouse and keyboard. This is also known as a Software KVM switch. The primary target is Wayland on Linux but Windows MacOS and Linux on Xorg have partial support as well (see below for more details). Focus lies on performance and a clean, manageable implementation that can easily be expanded to support additional backends like e.g. ... -
6
MongoDB NodeJS Driver
The MongoDB Node.js driver
The MongoDB Node.js driver allows Node.js applications to connect to MongoDB and work with data. The driver features an asynchronous API which allows you to interact with MongoDB using Promises or via traditional callbacks. Whether you are new to MongoDB or you just want to brush up on the core concepts, you can check out the Fundamentals section which features material on using the Node.js driver. The connection URI is the set of instructions that the driver uses to connect to a MongoDB deployment. It instructs the driver on how it should connect to MongoDB and how it should behave while connected. ... -
7
DIY Split-Flap Display
DIY split-flap display
...The primary design goal was to make something that's possible to fabricate at home in small or single quantities and can be customized and built by an intermediate hobbyist at a reasonable price. This meant using widely available materials and avoiding any tooling with a high upfront cost. Following that philosophy, the design uses store-bought vinyl stickers for the letters, is driven by an ubiquitous and cheap 28BYJ-48 stepper motor, and uses common PVC ID badge cards cut to shape for the flaps (though custom die-cut flaps are also available). ... -
8
NeoPixelBus
An Arduino NeoPixel support library
...NeoPixelBus now supports the RMTs 8 channels and two more channels using i2s. -
9
Synergy Core
The keyboard and mouse sharing tool
This is the open source core component of Synergy, a keyboard and mouse sharing tool. Control your computers with one mouse and keyboard. Control multiple computers using only one keyboard and mouse. Focus on developing software, designing, gaming and remove time switching between operating systems. Throw away the extra keyboards and spend time where it really matters. Simplify your workspace by combining multiple computers into one. Easily copy and paste between computers with no effort at all. Keep your passwords and sensitive data secure with TLS encryption. ... -
Grafana: The open and composable observability platformGrafana is the open source analytics & monitoring solution for every database.
-
10
ThingPulse ESP8266 Weather Station
ESP8266 Weather Station library supporting OpenWeatherMap
...By buying this and other kits from us you are funding the maintenance and development of this library. Make sure you use a version of the Arduino IDE which is supported by the ESP8266 platform. If you are using the PlatformIO environment for building, choose one of the available IDE integration or the Atom-based IDE, install libraries 561, 562, and 563 with "platformio lib install", adapt the WeatherStationDemo.ino file to your needs. The simple class uses the header date and time to set the clock. NTP-based time class written by Fabrice Weinberg. ... -
11
Open Source Cartridge Reader
A shield for the Arduino Mega that can back up video game cartridges
...Completely stand-alone, does not need a PC to operate (unless for updating firmware). Easy to modify open-source code, write your own extensions and share them with others. Portable thanks to a battery. Modular design using mostly off-the-shelf components. Reads NES, Famicom and Family Basic cartridges including save. Supports Mapper 30/NESmaker and flashes INL NM30 boards. Reads SNES roms and reads/writes save games from and to the SNES cartridge. Supported cartridge types so far, LoRom, HiRom, ExHiRom, DSP, SuperFX, SuperFX2, SDD1, CX4, SPC7110, SA1 (last two chips need Adafruit Clock Generator). ... -
12
HttpKernel Component
A structured process for converting a Request into a Response
The HttpKernel component provides a structured process for converting a Request into a Response by making use of the EventDispatcher component. It's flexible enough to create full-stack frameworks, micro-frameworks or advanced CMS systems like Drupal. Every HTTP web interaction begins with a request and ends with a response. Your job as a developer is to create PHP code that reads the request information (e.g. the URL) and creates and returns a response (e.g. an HTML page or JSON string).... -
13
S.M.A.R.T. Monitoring Tools
Disk Inspection and Monitoring
smartmontools contains utility programs (smartctl, smartd) to control/monitor storage systems using the Self-Monitoring, Analysis and Reporting Technology System (S.M.A.R.T.) built into most modern ATA and SCSI disks. It is derived from smartsuite. -
14
stm32flash
Open source flash program for STM32 using the ST serial bootloader
Open source cross platform flash program for the STM32 ARM microcontrollers using the built-in ST serial bootloader over UART or I2C -
15
GeigerLog
Python program for Geiger counters and Environmental Sensors
...Continues to support Geiger counters like GQ Electronic's GMC-300/500/600 , RadMon, RadPro, Gamma-Scout, audio-click and other low-cost Geiger counters, IoT devices, I2C based sensors, GQ EMF devices. GeigerLog reads data from devices, saves them to databases, prints to screen and plots as auto-updated, customizable graphs. Quality control using Statistics, Scatter, Poisson, FFT & Autocorrelation, and more. Gamma Spectra - can be displayed, calibrated, and evaluated in GeigerLog! The Raspberry Pi 4, 5 qualify as GeigerLog hosts. -
16
The Open IPMI project aims to develop an open code base to allow access to platform information using Intelligent Platform Management Interface (IPMI).
-
17
Drive Health Analyzer - SSD/HDD Monitor
Monitor disk health, predict failures, track SSD/HDD SMART attributes
Drive Health Analyzer is a comprehensive disk monitoring solution designed to prevent data loss by tracking the health status of SSDs and HDDs. The software reads SMART attributes, monitors temperature, analyzes disk performance, and predicts potential drive failures before they occur. It supports all major storage types including NVMe, SATA, and IDE drives. Features real-time alerts, detailed health reports, and automatic background monitoring. The intuitive dashboard displays critical... -
18
myFP2ESP32-Dev WiFi ASCOM Focuser
ASCOM-INDI ESP32-Dev Wifi focuser
An ESP32-Dev WiFi focuser. DIY or PCB designs. (c) Robert Brown 2014-2025, Holger M, 2019-2021. All rights reserved. Code or portions of code may not be copied or used without appropriate credit given to authors. Spreadsheet to calculate what stepper motor to use. https://sourceforge.net/projects/arduinoascomfocuserpro2diy/files/Documentation/Nema-Stepper-Motors.xlsx/download Spreadsheets to calculate... -
19
JxMake
A Java-based cross-platform build system.
JxMake is a Java-based, cross-platform build system primarily inspired by the syntax and features of GNU Make, Perforce Jam, and CMake. In addition, JxMake offers several features not typically found in other console-based build systems, including a built-in lightweight GUI, serial console, serial plotter, multi-MCU in-system programmer, and more. Currently, JxMake's loadable libraries (build scripts) are primarily designed for non-OS MCU systems and experimental use. Full support for... -
20
A set of C language API's and firmware applications that manage access to the Digitrax LocoNet and the core hardware resources of the Atmel AVR family of devices, to allow custom embedded LocoNet devices to be developed using GCC
-
21
G-USB-Formatter
Please read the description.
...Mandatory attribution: This program uses pyside-6. My Github: https://github.com/shampuan/G-USB-Formatter This program is a lightweight tool that allows you to format your USB storage devices using more features on Debian-based systems. -
22
San-Libs
Fixes the scanner error / Corrige les erreurs du scanner
[En] San-Libs fix the device detection error when the scanner driver is already installed in the Linux systems using the Sane backends. San-Libs utility will verify the Sane libraries and set the configuration files to detect your scanner. [Fr] San-Libs corrige l’érreur de détection du scanner alors que le pilote est installé sur les systèmes Linux qui utilisent les back-end de Sane. L’utilitaire San-Libs va vérifier les librairies et reconfigurer les fichiers de Sane pour détecter votre scanner. -
23
Linux-Disk-Defrag
Defragmenter application for Ext4 partitions
This program is a defragger application for Linux systems using mechanical HDDs. Its purpose is to improve performance in systems that still use HDDs. It is particularly useful in server workstations. Although EXT file systems are often described as free of fragmentation, they actually experience fragmentation, providing performance improvements of up to 30 percent, especially in cases of severe fragmentation. -
24
Agat Hardware
Create replicas of Agat Hardware
This project is dedicated to creation PCB replicas of Agat Hardware. Most of the PCBs are created using Kicad Open source tool. -
25
MisterHouse is a Windows/Unix home automation program written in Perl. It can respond to voice commands, web browsers, time of day, serial port and X10 data, external files, etc and can speak via Text to Speech engines. Support is on https://sourceforge.net/p/misterhouse/mailman/misterhouse-users/ and code is maintained on https://github.com/hollie/misterhouse
