Search Results for "expert system source code"

...Based on several hardware options it supports a commercially available DSP hardware and provided also Open Source Code for all the low level signal processing tasks and instrument controls in a most flexible and adaptable manner. All latest software is available via github.com/pyzahl/Gxsm4 (source code) or as binary for Ubuntu on https://launchpad.net/~totto/+archive/ubuntu/gxsm

CP/M Plus on ZX Spectrum +3 has ability to load device drivers from normal disk files (with .fid extension) on boot. One of the most important devices for any disk operating system is the mass storage drive. Although ZXMMC device is available on the market for years and it works well with +3e firmware, partitions created on MMC cards could not be accessed from CP/M world. At some point it became so frustrating, I decided to write FID driver for it. It's not perfect, but it works surprisingly well. For list of limitations, build instructions and more details see the source code file.

This is HimemX - the open-source XMS memory manager of FreeDOS. Uses unreal mode when possible and has a very low conventional memory footprint. Got any patches? Noticed any bugs? Please report your findings on the FreeDOS mailing list: freedos-user@lists.sourceforge.net

OpenVGA is an free and open FPGA-based implementation of a VGA compatible graphics adapter, and utilising low-cost hardware. The project includes the PCB schematic and artwork, Verilog HDL, firmware assembly code, and driver source code.

mDriver is a utility to migrate binary device driver from Windows to Linux. It takes out the binary instruction and data from Windows driver (*.sys files), and then combine them with some supporting code to build a corresponding Linux driver module.

This software is the going to be used in a small office refrigerator to controll the thermostat. Currently the code is written for the PIC16F84 in assembler. The code is fully compilable in MPLAB.

Open Power will be a CPU cooling software for Win 9x (like rain but open source), it is partially based on the source code of KCPUCooler by Kirys Tech 2000.

Drivers Template Library for WinNT/2K(ME)/XP. At this time required VCC 6.0(5.0) and DDK.

Embedded PowerPC Bootloader Project, especially for Embedded PowerPC boards. The code for this project is frozen. Development continues with the "U-Boot" project (Universal Boot Loader, see http://sourceforge.net/projects/u-boot ).

Tools around the Scenix 48/52 series microcontrollers