Search Results for "python-i2c-tiny-usb"
Sort By:
Showing 51 open source projects for "python-i2c-tiny-usb"
View related business solutions-
$300 Free Credits for Your Google Cloud ProjectsLaunch your next project with $300 in free Google Cloud credits—no strings attached. Test, build, and deploy without risk. Use your credits across the entire Google Cloud platform to find what works best for your needs. After your credits are used, continue with always-free tier services. Only pay when you're ready to scale. Sign up in minutes and start exploring.
-
Auth0 B2B Essentials: SSO, MFA, and RBAC Built InAuth0's B2B Essentials plan gives you everything you need to ship secure multi-tenant apps. Unlimited orgs, enterprise SSO, RBAC, audit log streaming, and higher auth and API limits included. Add on M2M tokens, enterprise MFA, or additional SSO connections as you scale.
-
1
HackRF
Low cost software radio platform
...HackRF One from Great Scott Gadgets is a Software Defined Radio peripheral capable of transmission or reception of radio signals from 1 MHz to 6 GHz. Designed to enable test and development of modern and next-generation radio technologies, HackRF One is an open-source hardware platform that can be used as a USB peripheral or programmed for stand-alone operation. HackRF One has an injection-molded plastic enclosure and ships with a micro USB cable. An antenna is not included. ANT500 is recommended as a starter antenna for HackRF One. HackRF One is test equipment for RF systems. It has not been tested for compliance with regulations governing the transmission of radio signals. ... -
2
Repeater-START
Showing The Amateur radio Repeaters Tool
Repeater-START (Showing The Amateur Repeaters Tool) is an app to view nearby ham radio repeaters. It runs on Windows, Android, Ubuntu Linux and Raspbian for Raspberry-pi, Librem Phone, Pinephone/Manjaro Linux etc. -
3
WSJT
Weak signal ham radio communication
The WSJT project implements software for amateur radio communication using state-of-the-art digital techniques. Typical applications involve "DXing" at LF, MF, HF, and VHF+ frequencies, including meteor scatter and EME ("moonbounce"). Major emphasis is placed on weak-signal techniques. Summary Program Descriptions: WSJT-X supports the communication protocols FST4, FT4, FT8, JT4, JT9, JT65, Q65, MSK144, WSPR, FST4W, and Echo, each optimized for different sorts of radio-wave... -
4
liaisonos
Emergency Communications Software for Ham Radio
A Debian-based Linux distribution purpose-built for amateur radio emergency communications. Boot from USB, connect your radio, and you are on the air — with JS8Call, Pat-Winlink, VARA, VarAC, fldigi, and YAAC with SAR plugin ready to go. -
MongoDB Atlas runs apps anywhereMongoDB Atlas gives you the freedom to build and run modern applications anywhere—across AWS, Azure, and Google Cloud. With global availability in over 115 regions, Atlas lets you deploy close to your users, meet compliance needs, and scale with confidence across any geography.
-
5
KB1OIQ - Andy's Ham Radio Linux
Install ham radio software on Debian Live, RPi OS, or Ubuntu Linux
Latest Version: - Version v27: May 3rd, 2026 Version 27 ======== AHRL can be installed on top of Debian Live, Raspberry Pi OS, or any supported flavor of Ubuntu Linux. The supported Linux flavors are listed in the GETTING_STARTED document. An installation script does all of the work. Please download and read the bug workarounds file: https://sourceforge.net/projects/kb1oiq-andysham/files/v27/V27_Bug_Workarounds.txt Please download and READ the installation... -
6
Ham Radio Control Libraries
Library to control radio transceivers and receivers
The Hamlib project's purpose is to develop flexible and portable shared libraries that offer a standardized API to control any radio oriented equipment through a computer interface. -
7
Skywave Linux
Global Software Defined Radio at Your Fingertips
Updated 2026/01/24: Turn your PC into the ultimate shortwave radio. Skywave Linux is an X86, 64 bit live environment configured for accessing internet accessible software defined radio receivers. With this operating system, you may tune in popular stations or amateur radio, aeronautical, maritime, or other signals received at remote internet servers around the world. For a live map of the best KiwiSDR and WebSDR servers and a nice "click to tune" interface, Use the installed SDR-Map... -
8
═══════════ ▲▲▲ ═════════════════════════════════════════════ Find the various versions on the "Files" tab (https://sourceforge.net/projects/jtdx-improved/files/) jtdx_improved is an enhanced version of JTDX by Igor Chernikov et al. (https://sourceforge.net/projects/jtdx/). Both my and Igor's forks are based on the excellent WSJT-X software by Joe Taylor K1JT, Steve Franke K9AN, Bill Somerville G4WJS, myself and others (https://sourceforge.net/projects/wsjt/). After the succes of my...
-
9
HFPilot
HFPilot for shortwave/ham radio HF propagation. Let signals fly around
HFPilot for shortwave/ham radio HF propagation. Let signals fly around the world with HFPilot! -
Stop Cyber Threats with VM-Series Next-Gen Firewall on AzureGain integrated visibility across all traffic in a single pass. Deploy Palo Alto Networks VM-Series to determine application identity and content while automating security policy updates via rich APIs.
-
10
radiOS
Linux for Amateur Radio
radiOS is a ham radio-centric, customized version of Arch Linux. Arch is generally recommended to experienced Linux users but radiOS should help you to get to know one of the most versatile and fun Linux distributions around. Not to mention use your radio without having to compile a bunch of programs yourself. radiOS comes with tools for use with amateur radio, especially SOTA, POTA, and GNU Radio Companion with HackRF Software Defined Radio. If it doesn't work as expected, or you would... -
11
Filt8- v3.6 alerts for WSJT-X FT8
Alert and filter QSO for WSJT-X FT8 FT4
...Filters & alerts WSJT-X FT8 and FT4 output for Mac/Linux/Win. Like JTAlert but minimalist and cross-platform. Works on low end systems such as Raspberry PI or laptop with minimal config, no internet required. Written in Python Problems? Email us at snitch.lyric0z@icloud.com -
12
gr-message_to_serial
GNURADIO OOT block
Block that receives a " message" and send string values over serial connection, to control hardware devices ( switch ), for example, via Arduino based controller ( see https://sourceforge.net/projects/ardu-switch/ ) Prerequisite: pyserial Build as usual for a Gnuradio block: - download and unpack - cd gr-message_to serial - mkdir build && cd build - cmake .. && make - sudo make install && ldconfig If successful this block is into OOT section... Enjoy ;-) -
13
remoteGUI
µSDX & CWdaemon GUI
************************************* UPDATE ******************************* This project has been divided in two parts: - GUI for cw through cwdaemon, with improved specs / customization [CWdaemonGUI] - GUI rig control [Microrig GUI] The packages are ready as .zip folders in the File section. Enjoy :-) ****************************************************************************** "Remote HF Operation" it's now a reality! With this app it's possible to send CW, with CWdaemon,... -
14
SoDaRadio
SoDaRadio is a VHF/UHF all mode transceiver for the USRP
Moved to github: see https://kb1vc.github.io/SoDaRadio/ SoDaRadio is an allmode VHF/UHF SDR transceiver built for the Ettus Research USRP N2xx and B2xx software defined radio platforms. It is designed for use by amateur radio operators. It has been used as a general purpose receiver, and as an exciter/IF for microwave transverters. -
15
Panoramic RTL-SDR directly
Open source RTL-SDR Panoramic Spectrum Analyzer
This utility 'rtl_sdr_panorama.exe' designed for panoramic imaging spectrum REALTIME any (reasonable) band by accumulating within 0.5 second spectral samples of limited bandwidth for simultaneous monitoring (speed via USB, usually within 2...3 MHz) c DVB- chip based RTL-2832/R820 (13...1864 MHz). Controlled parameters: 1. Dongle Phone system. 2. Initial scan, Hz. 3. Endpoint scan, Hz . 4. Spacing scanning ediitsy tens kHz/MHz. 5. Noise level, dB. 6. Magnitude clock frequency correction, ppm. Announcement on the resource http://www.rtl-sdr.com/new-rtl-sdr-panoramic-spectrum-analyzer/ New driver RTL-SDR http://lists.osmocom.org/pipermail/osmocom-sdr/2014-August/001353.html -
16
FreqLength
Wavelength Calculator
FreqLength is a simple wavelength calculator that takes a given frequency as input and spits out various wavelength values for that frequency (full wave, half wave, etc.) If you'd like to donate there's several ways to do so: PayPal: https://paypal.me/gerowen Bitcoin (BTC): bc1q86c5j7wvf6cw78tf8x3szxy5gnxg4gj8mw4sy2 Monero (XMR): 42ho3m9tJsobZwQDsFTk92ENdWAYk2zL8Qp42m7pKmfWE7jzei7Fwrs87MMXUTCVifjZZiStt3E7c5tmYa9qNxAf3MbY7rD LiberaPay: https://liberapay.com/gerowen -
17
Neural Network signal recognition rtlsdr
Deep learning signal classification (recognition) using rtl-sdr dongle
WARNING: Outdated version here. Everything has been moved to github: https://github.com/randaller/cnn-rtlsdr -
18
RTLSDR Scanner
A cross platform Python frequency scanning GUI for rtl-sdr
A cross platform Python frequency scanning GUI for USB TV dongles, using the OsmoSDR rtl-sdr library. In other words a cheap, simple Spectrum Analyser. More information can be found at: http://eartoearoak.com/software/rtlsdr-scanner An installer and standalone versions for Windows are located here: https://github.com/EarToEarOak/RTLSDR-Scanner/releases Sources are available on GitHub: https://github.com/EarToEarOak/RTLSDR-Scanner ** The up to date installer is no longer maintained on this site and can now be found at https://github.com/EarToEarOak/RTLSDR-Scanner/releases ** -
19
fun2audio
Funcube Dongle Pro+ Data Capture & Audio Output
Various reference programs to read baseband I/Q sample data from a Funcube Dongle Pro+ (FCDPP) software defined radio (SDR) hardware front end, demodulate the data stream and send it to the host's audio output port. Programs are present to demodulate AM, CW, FM and SSB (USB, LSB) streams. Also included is a program that writes FCDPP sample data to its standard output (stdout) port. The programs require the qthid program to control the FCDPP frequency and gain (also available at sourceforge.net. Search for: qthid). Recent activity (10/2014): Added test programs used to construct fun2ssb. See README4; (12/2014) Made program changes to accommodate subsequent complier revisions. ... -
20
SARK110 SDK
SDK for the SARK-110 Antenna Analyzer
The SARK110 SDK allows the development of user applications for the device or using the device as a platform for experiments. The SDK provides the following basic functionalities: • Graphic display • Keypad • Buzzer • USB (Mass Storage Driver) • DDS • Timer • ADC driver • FAT file system • Sample application In addition the SDK provides a device simulator for developing the application on the PC, intended mainly for the development of the user interface of the application. This simulator requires the Microsoft Visual Studio (Visual C++) programming environment. -
21
A CW beacon implemented in C language on a AVR AtTiny13A microcontroller (1KB flash!). Include a CW parametric modulator/keyer, an emulated I2C periferal and a device driver in order to handle the Si570 oscillator by Silabs. You can personalize the transmitted message and the morse speed (in WPM). In the example the beacon is IQ6MC/B JN63RH @ 144.450MHz. Enjoy this example and if you will appreciate it, please sens me a feedback! IW6DFW, Maurizio
-
22
SimPyL
SimPyl - The Simple Python Logger
A simple console-based logging program for ham radio operators. After learning the basics of the python programming language, I was trying to come up with a coding project that would give me the opportunity to learn and to create something simple and useful for me and my fellow hams. As time goes on and as my knowledge progresses, more features will be added. My hope is that one day this piece of software becomes robust and complete enough to be used as an every day logger for ham radio operators, as well as a contest logger. -
23
KB1OIQ - Micro-Fox Config GPL
Configure a Byonics Micro-Fox 15 amateur radio transmitter
This software allows the user to specify various operating characteristics of the Micro-Fox 15 by Byonics, LLC. The Micro-Fox 15 is a frequency agile 2m low power transmitter typically used as the fox during amateur radio fox hunts. The operating characteristics of this device can be copied to and from the device, and can also be saved and loaded from a file. Please note that this software is distributed within the "Andy's Ham Radio Linux" software collection. -
24
LibreOffice HamLog
Logbuch für Funkamateure mit LibreOffice
...LibreOffice HamLog ist eine Tabelle mit Basic-Scripten und Masken zur Führung eines Amateurfunk Logbuches. Der Gedanke hinter der Software ist folgender: Ich benötige keine Installation und kann mein Log auf einem USB Stick speichern und an jedem Rechner mit LO oder OOo führen egal welches Betriebsystem. -
25
AutoLoop
Automatically tuned loop antenna for the shortwave bands
This project aims to create an automatically tuned loop antenna for the shortwave bands. The implementation is based around an AVR microcontroller. The interface is controlled via a serial interface. The aim is to create an android app to control the antenna via a rs232 ttl to bluetooth converter.
