Search Results for "digital"

MTF provides a simple framework for hardware projects written in microPython for the Raspberry Pi Pico. Designed where polling is needed, projects can be broken down into discrete components (tasks) which can run together. MTF provides scheduling, timeouts and a simplified signalling system for tasks to communicate with each other. Version 2.1 uses a modified run-loop which improves timing accuracy for short periods.

This library controls many Silicon Laboratories Si47xx family radio chips with an Arduino microcontroller. Major features include: • I2C and SPI bus • Supports "original" (Uno, Duemilanove, and their clones), Mega 2560, Leonardo, and Due Arduinos • FM/AM receive modes; including short, medium, and long wave AM • Analog and/or digital audio output • FM RDS and RBDS • Localization of receive bands, channel spacing, FM de-emphasis, and RDS/RBDS • Correctly decodes RBDS PI codes...

Hardware description and software for the Bob-clock, a digital implementation of an analog clock using 60 bi-color LEDs for displaying the time. The hardware is based on an Atmel AVR ATmega324.

SpinDrive is a Parallax Propeller Chip-based engine control system.

Simple Lossless Ad-hoc Protocol (SLAP) is designed to be used for wireless digital data transfer on embedded systems. The program is built for uClinux, a derivative of Linux designed for embedded microcontrollers, but can be easily ported.

Data logger software to interface with the B&B Electronics IO module. You can see more info about these modules here: http://bb-elec.com The 232SDA12 has 11 analog inputs, 4 digital inputs, and 4 digital outputs. Use the installer here: http://jimroal.com/exe/SDA232/publish.htm