Search Results for "web 3"

Alt-F provides a free and open source alternative firmware for the DLINK DNS-320/320L/321/323/325/327L and DNR-322L. Alt-F has Samba and NFS; supports ext2/3/4, VFAT, NTFS, BTRFS; RAID 0, 1, 5 (with external USB disk) and JBOD; supports up to 8TB disks; rsync, ftp, sftp, ftps, ssh, lpd, DNS and DHCP servers, DDNS, fan and leds control, clean power up and down... and more. Alt-F also has a set of comprehensive administering web pages, you don't need to use the command line to configure it. ...

AVR ATmega port of freeRTOS A port of freeRTOS which can be flexibly flexibly configured use almost any available Timer on AVR ATmega devices and will operate with almost any classic Arduino device from Arduino, SeeedStudio, Sparkfun, Freetronics or Pololu. Going forward this repository will be updated less often and only with major releases. Please check at Github for the latest commits. https://github.com/feilipu/avrfreertos The Goldilocks Analogue story is told here....

SmartSlog (Smart Space Ontology) is a software/application development kit (SDK or ADK) for programming Smart-M3 agents (Knowledge Processors, KPs) that consume/produce smart space content according with its high-level ontological representation. SmartSlog applies the code generation approach: given an OWL ontology description, the ontology programming library is produced. The latter provides API to access the smart space via a Smart-M3 Semantic Information Broker (SIB) and data structures...

...Hypervisor (kvm or xen) Storage (ZFS and Gluster) Container (Docker) Networking (iproute2, nftable, OpenVSwitch, Bird) Antd (http://www.anthilla.com/en/software/antd/ ) web based management all open source components from other projects are released under respective licenses, all parts, files,subprojects developed as part or this project are released under the BSD 3 clause license.

...The LED light simulate random cloud, random lightning during cloud and also manage sunrise and sunset. The system is composed of an Arduino mega 1280, an ethernet shield w5100, an LCD keypad shield 1602, a 3,2" TFT touchscreen, a RTC module DS1307 and 3 DS18B20 one wire temperature sensor. Up and running: -16x2LCD display and menu to manage clock, cloud and lightning setup. -3,2" TFT diplaying temperature, led power, led status (cloud, sunrise, sunset...), clock, time of next cloud. -Local web server is running but webpage need to be finished -Web COSM client. Online temperature logging -Virtual RTC In development: -Addition of the last DS18B20 -Rebuild TFT touchscreen menu -Reorganization and clarification of the code -Implement DS1307 (actual chip is down, waiting for a new one...)

NetFlash100 contains a full system image with a Linux kernel, root file system and the web interface to access flash memory of ATMEL ATNGW100 boards. To be able to use NetFlash100 you need: 1. ATNGW100 board with a working u-boot. 2. Ethernet and serial terminal connections. 3. A SD card (must be more than 40MB) Once you successfully boot NetFlash100 image, it provides you with a web interface on IP 10.0.0.1, with this interface one can read, write and erase the available flash devices on the system. ...

Open source data logger focused on the wind industry. Hardware platform based on the TI MSP430, firmware written in C using mspgcc. Sponsored by the Wind Energy Center at the University of Massachusetts, Mechanical and Industrial Engineering.