Search Results for "sd"

OpenBLT is mostly used as an STM32 bootloader, due to the popularity of STM32 microcontrollers. However, the bootloader’s architecture is such that it can work with any microcontroller and use any type of communication interface to perform firmware updates.

The KhadashPay project is my attempt to make a payment system from scratch. As for the customers of the store where the KhadashPay is deployed, Khadash pay doesn't keep any logs whatsoever and doesn't require a bit of your personal information to create an account. You can find the tutorials here: V2.0 (ESP32 Version): https://www.instructables.com/KhadashPay-V20/ V2.0 (Raspberry Pi Pico Version): https://www.instructables.com/KhadashPay-V20-Raspberry-Pi-Pico-Version/ V3.0...

AVR ATmega port of freeRTOS A port of freeRTOS which can be flexibly flexibly configured use almost any available Timer on AVR ATmega devices and will operate with almost any classic Arduino device from Arduino, SeeedStudio, Sparkfun, Freetronics or Pololu. Going forward this repository will be updated less often and only with major releases. Please check at Github for the latest commits. https://github.com/feilipu/avrfreertos The Goldilocks Analogue story is told here....

Moebius Linux is a Raspberry PI armhf distribution built from scratch and targeted to have a small footprint. 20Mb of RAM (with ssh) and a 128Mb SD are minimum requirements. Size, speed and optimizations are main goals for this distro, take a look at it and contribute if you like it

Porting Android to the iPAQ 200/210/211/212/214 or equilivalent. It has a 4-inch VGA Screen (TFT LCD display), resistive touchscreen, WiFi, Bluetooth, SD/MMC, CF. Originally it is running Windows Mobile 6 Classic. For help, see README files and the wiki. This project is in Alpha state, that means it is not suitable for daily usage unless developing for the project. NOT FOR THE FAINTHEARTED AND/OR COMPUTER IDIOTS!

NetFlash100 contains a full system image with a Linux kernel, root file system and the web interface to access flash memory of ATMEL ATNGW100 boards. To be able to use NetFlash100 you need: 1. ATNGW100 board with a working u-boot. 2. Ethernet and serial terminal connections. 3. A SD card (must be more than 40MB) Once you successfully boot NetFlash100 image, it provides you with a web interface on IP 10.0.0.1, with this interface one can read, write and erase the available flash devices on the system. It can also add, modify or delete u-boot parameters. NetFlash100 also provides information about the system and it's flash devices that might be useful. ...

OB2CANob is the software side of an OBD2 capable scantool with CAN on board. The software is a small operating system for Freescale 9S12X processors, that can of course be used for other handheld projects using a graphical LCD, keypad and SD-card.

This project aims a proving an Hardware as a VSCP node (M2M) to store information remotely on the CAN network.

Expansion card for 8 bit computer Sharp MZ-800. Connection to SD / MMC card with FAT16 filesystem. Emulated FD controller. MZF repository. This project is already stoped. Please see the MZ800 Unicard 2nd generation https://sourceforge.net/projects/mz800ukp1/

Vanilla Kernel support only embedded flash and DM9000 Ethernet controller. This project extend support perepherial on Toradex, Orchild and other evaluation board, and may be, some embedded applications.

This project is about using a SD-card together with an ATMEL ATmega32 microcontroller as mass storage medium. It implements the interface to the SD-card, a simplified FAT16 filesystem and a sample application: a data logger.