Open Source C Embedded Systems Software
Sort By:
C Embedded Systems Software
View 50 business solutionsBrowse free open source C Embedded Systems Software and projects below. Use the toggles on the left to filter open source C Embedded Systems Software by OS, license, language, programming language, and project status.
-
Auth0 for AI Agents now in GAConnect your AI agents to apps and data more securely, give users control over the actions AI agents can perform and the data they can access, and enable human confirmation for critical agent actions.
-
Payments you can rely on to run smarter.Accept payments at your counter or on the go. It’s easy to get started. Try the Square POS app on your phone or pick from a range of hardworking hardware.
-
1
FreeRTOS Real Time Kernel (RTOS)
Market leading real time kernel for 40+ microcontroller architectures
************************************************************************************************************************ * The primary FreeRTOS repository is now in Git. Go to https://github.com/freertos for the latest FreeRTOS kernel and libraries. * Our support has moved to https://forums.freertos.org. ************************************************************************************************************************ FreeRTOS is a market-leading real-time operating system (RTOS) for microcontrollers and small microprocessors. Distributed freely under the MIT open source license, FreeRTOS includes a kernel and a growing set of libraries suitable for use across all industry sectors. Visit https://www.freertos.org for more information and other download options. Note about support/discussions forum: The FreeRTOS support forum has moved to https://forums.freertos.org. Please update your bookmarks and create new posts in the appropriate category in the new community forums. -
2
stm32flash
Open source flash program for STM32 using the ST serial bootloader
Open source cross platform flash program for the STM32 ARM microcontrollers using the built-in ST serial bootloader over UART or I2C -
3
MicroPython
Python implementation for microcontrollers and constrained systems
MicroPython is a lean and efficient implementation of the Python 3 programming language that includes a small subset of the Python standard library and is optimised to run on microcontrollers and in constrained environments. The MicroPython pyboard is a compact electronic circuit board that runs MicroPython on the bare metal, giving you a low-level Python operating system that can be used to control all kinds of electronic projects. MicroPython is packed full of advanced features such as an interactive prompt, arbitrary precision integers, closures, list comprehension, generators, exception handling and more. Yet it is compact enough to fit and run within just 256k of code space and 16k of RAM. MicroPython aims to be as compatible with normal Python as possible to allow you to transfer code with ease from the desktop to a microcontroller or embedded system. -
4
QP Real-Time Event Frameworks & Tools
Real-Time Event Frameworks based on active objects & state machines
QP real-time event frameworks (RTEFs) provide lightweight, modern, event-driven architecture based on asynchronous Active Objects (Actors) and Hierarchical State Machines. The matching QM model-based design tool and other host-based tools complement the QP frameworks by supporting graphical modeling, code generation, software tracing, and unit testing for event-driven embedded software. Visit https://www.state-machine.com for more information. The QP RTEFs can run on bare-metal microcontrollers, replacing a traditional RTOS. The frameworks contain a selection of built-in real-time kernels (RTOS kernels), such as the cooperative QV kernel, the preemptive non-blocking QK kernel, and the unique preemptive, dual-mode (blocking/non-blocking) QXK kernel. Native QP ports and ready-to-use examples are provided for ARM Cortex-M (M0/M0+/M3/M4/M7/M33/...) as well as other CPUs. The QP RTEFs can also work with many traditional RTOSes and General-Purpose OSes, such as Linux and Windows. -
Collect! is a highly configurable debt collection softwareThe flexible & scalable debt collection software built to automate your workflow. From startup to enterprise, we have the solution for you.
-
5
dfu-util
Multiplatform USB DFU host utility
dfu-util is a host side implementation of the DFU 1.0 and DFU 1.1 specifications of the USB forum. DFU is intended to download and upload firmware to/from devices connected over USB. -
6
ChibiOS/RT is a free and efficient RTOS designed for deeply embedded applications. It offers a comprehensive set of kernel primitives and supports many architectures: ARM7, Cortex-M0, Cortex-M3, Cortex-M4, PowerPC e200z, STM8, AVR, MSP430, ColdFire, H8S, x86.
-
7
-
8
DMX Library for Arduino
DMX Library and usage examples for Arduino
This Library includes a DMX Master, DMX Slave and various examples on how to use its implementation. This projects has been started to support the use of our Shielded DMX / RDM Shield for Arduino. The library is made available under the GNU Lesser General Public License If you would like to make contributions to the source code feel free to contact the project admin -
9
WP 34s
Scientific/engineering firmware repurposing HP business calculators!
This project has created scientific firmware for the HP-20b and HP-30b business calculators. WP 34S turns either of these calculators into a powerful keystroke programmable scientific device. According to our customers, it's the most powerful and fastest RPN scientific pocket calculator ever built. WP 34S is alive and stable since 2011. We have succeeded in satisfying the most picky users - read about their experiences on http://www.hpmuseum.org/forum/forum-8.html. Since 2014, WP 34S runs in version 3.3. Our customers confirm its documentation is excellent and comprehensive (see feedback); a full-color printed edition is available from https://www.amazon.com/dp/153366238X since 2018-10-15. Alternatively, you can get a personalized pdf-manual for a ≥ 9 US$ donation here. We have also produced the WP 31S which is derived from the WP 34S source code. This is an entry-level scientific calculator. Its printed manual is available from https://www.amazon.com/dp/1499231164 . -
Say goodbye to broken revenue funnels and poor customer experiencesLeanData is a Demand Management solution that supports all go-to-market strategies such as account-based sales development, geo-based territories, and more. LeanData features a visual, intuitive workflow native to Salesforce that enables users to view their entire lead flow in one interface. LeanData allows users to access the drag-and-drop feature to route their leads. LeanData also features an algorithms match that uses multiple fields in Salesforce.
-
10
Core13
Arduino core for Attiny13
An Arduino core for the Attiny13 processors designed with small size in mind. *Support*: http://arduino.cc/forum/index.php/topic,89781.0.html Currently supported functions: * = Partial support map() random() randomSeed() millis() micros() delay() delayMicroseconds() * analogRead() analogWrite() pinMode() digitalRead() digitalWrite() pulseIn() (Untested) shiftIn() (Untested) shiftOut() (Untested) If you find any issues be sure to make sure you are using the latest version first. -
11
OpenBLT
Bootloader for STM32, XMC, HCS12 and other microcontroller targets.
OpenBLT is mostly used as an STM32 bootloader, due to the popularity of STM32 microcontrollers. However, the bootloader’s architecture is such that it can work with any microcontroller and use any type of communication interface to perform firmware updates. -
12
eChanter is an Open Source electronic bagpipe project, based on the Arduino platform, using capacitive touch sensors, with polyphonic wavetable synthesis PCM audio at 8KHz. See Files for the development version, eChanter v3.0.
-
13
AVRILOS
Simple AVR OS
A simple Embedded System Framework that allows rapid development of applications build for AVR family. System is based on a super-loop architecture with check and skip (no-wait) flag event driver system. Supports: UART, SysTick Timer, ADC, SPI, EEPROM, PWM. Also supports: Xilinx FPGA configuration, FPGA SSI interface, smart card reader etc. Tested partially (different modules in each case) on ATMega163/16/32/323/8. Awards CodeProject 2010, Third Prize, Hardware and Device Programming Check the Wiki Page for more details. -
14
Open Source SW/HW Project for Embedded Ethernet Applications. Works with AVR ATmega256/128/103, AVR32, SAM7X, SAM7S(E), SAM9, AT91X40, GameBoy Advance, Cortex M3 / M4 (STM32, NXP LPC, LM3S), Freescale Coldfire, RTL8019AS, LAN91C111, CS8900 and DM9000E chips. Offers a tiny TCP/IP stack including HTTP, FTP and DHCP.
-
15
MicroLua DS
MicroLua brings Lua on the Nintendo DS for easy programming
MicroLua brings the programming language Lua on the Nintendo DS for easy and fast development of beautiful homebrews! Based on brunni's µLibrary, µLua is a Lua interpreter featuring fast drawings and many important functionalities. You can exploit your Nintendo DS with the simplistic yet powerful Lua language! On your cartridge, MicroLua is a NDS executable that shows as its frontend a great graphical shell from which you can explore your cartridge and run Lua scripts written for µLua. µLua already benefits from an impressive collection of homebrews, from a complete and expandable MicroLua IDE to enjoyable games, produced by an active and helpful community. -
16
AVR HV Programmer
High voltage parallel programmer for AVR microcontrollers.
AVR-HV is high voltage parallel programmer for Atmel AVR series microcontrollers. AVR-HV allows programming, reading, verifying and configuring AVR microcontrollers with its high voltage programming interface and it connected with PC using USB interface. -
17
HC6800EM3
English Examples Projects for HC6800EM3 MCU devkit
This project translates and rewrites C-code examples for the Prechin's MCU devkit, since original docs & examples were released in Chinese. Besides, some illegal stuff from original CD will be removed. -
18
Battery Optimizer
Helps to improve the life expectancy of an electronic device's battery
The creation of this device is in response to the overcharging issue that electronic devices with lithium ion batteries face. Most electronic devices when charged to 100 percent will continue to receive power from their charger, overtime this will slowly degrade the life expectancy of the lithium ion battery in the electronic device. The Battery Optimizer aims to increase the life expectancy of a lithium ion battery in an electronic device by automatically stopping power being fed to an electronic device when the battery has reached a set threshold. Some companies do this with their devices but are usually proprietary. -Lenovo does this with some of their laptops -Company called "chargie" already doing this for phones. Using this device, it will provide universality. For the first iteration of this device, I chose to focus on laptops. I hope in the future to make an app for phones to connect to the device as well. -
19
FlashProg
Simple USB flash memory programmer.
FlashProg is USB base flash memory programmer which is specifically design to read and program 3.3V SPI flash memory devices. -
20
ELKS is a subset of the Linux kernel that runs on IBM compatible PCs from 8086 up. It is intended to get use out of obsolete old hardware, for use in embedded systems, and as an educational tool. ELKS has been moved to Github to protest SourceForge's installer adware hijacking. This does not directly affect ELKS, but it does affect many major open source projects such as Gimp and FileZilla by attempting to trick the user into installing adware in order to download these programs. I refuse to leave ELKS here with such policies in effect. If you have questions about this, please email jody@c02ware.com.
-
21
Ficl is a lightweight, embeddable scripting language designed to be incorporated into other programs, including memory constrained embedded systems. Ficl conforms to the 1994 ANSI Standard for Forth, and provides several useful extensions including object oriented programming that can wrap compiled code and hardware interfaces. Unlike Lua or Python, Ficl acts as a component of your system - you feed it stuff to do, it does the stuff, and comes back to you for more. You can export compiled code to Ficl, execute Ficl code from your compiled code, or interact. Your choice. Ficl includes a simple but capable object model that can wrap existing data structures. Applications include scripting, hardware bring-up, rapid prototyping, and system extensions.
-
22
W-Bus library and applications
W-Bus communication library
This is a small library that allows comunicating with a Webasto (tm) W-Bus capable car heating system. Runs on Personal Computers or for embedded devices (slim design). Easily portable. Includes a Heater manager, heater controller program and more. The GIT repository (CVS is deprecated) also includes a control unit application to control W-Bus capable devices, a W-Bus compatible heater unit firmware application and a heater simulator for testing purposes. Also, a serial port loop back driver for linux is included to simulate OBD II K-Line adapters. -
23
WinDS
Windows XP reimplemented on Nintendo DS
WinDS is a Reimplementation of the OS Windows(R) XP(R) on the Platform Nintendo DS. Since i started coding Apps for the NDS, my goal was to write a program, called WinDS, which does (nearly) the same as the real appy by Microsoft. In contrast to other little NDS-Operating Systems, just like Woopsi etc. you can code your own Application in Lua for WinDS: just copy the Code onto the FAT-Disk and execute it from within WinDS! This is what makes WinDS so unique. The New Beta 0.95 is out, it features - 52 Classes that are already available within Lua - 25 different types of user interface classes - 8 different predefined dialogs which makes it the perfect GUI sandbox for DS. PS: More time without update means: next update will have even more improvements, as i am still developing ;) -
24
Format Converter - Intel HEX, Elf32, BIN
File Format Converter Between HEX / BIN / ELF
Intel HEX File Processing Software File Format Converter Between HEX / BIN / ELF The source code was created and debugged in the eS development environment (for Linux and Windows) and is an example of its use. https://esolution.sourceforge.io/ -
25
cmu-opkg
opkg for cmu mazda infotainment
This is only repository binary file. If you interest, visit the website https://gitlab.com/mzdonline/cmu-opkg. For developer to activate package management system on CMU. Developer can easy to build own package .Look at Makefile and opkg/*
