Search Results for "uno"

...Please check at Github for the latest commits. https://github.com/feilipu/avrfreertos The Goldilocks Analogue story is told here. http://feilipu.me/?s=Goldilocks+Analogue The Goldilocks 1284p story is here. http://feilipu.me/2013/03/08/goldilocks-1284p-arduino-uno-clone/ If this repository is too complicated to get started, a minimum AVR freeRTOS configured using the Watchdog Timer and Heap 3 is also also available. https://github.com/feilipu/miniAVRfreeRTOS For the Arduino platform there is a freeRTOS Library available in the Arduino IDE Library manager. https://github.com/feilipu/Arduino_FreeRTOS_Library

KleOS 1.1.0: Fixed some warnings. KleOS 1.1: Offers support for the Arduino Due boards. KleOS 1.1_Due: It's the actual support for Arduino Due boards. --- KleOS project is here to help you create real time applications for the Arduino platform. * Arduino. Your preferred electronics platform. * FreeRTOS. The real time operating system for embedded systems. * Arduino-mk. The tool to compile your Arduino projects from the command line. Arduino is the opposite to real time; however,...

This library controls many Silicon Laboratories Si47xx family radio chips with an Arduino microcontroller. Major features include: • I2C and SPI bus • Supports "original" (Uno, Duemilanove, and their clones), Mega 2560, Leonardo, and Due Arduinos • FM/AM receive modes; including short, medium, and long wave AM • Analog and/or digital audio output • FM RDS and RBDS • Localization of receive bands, channel spacing, FM de-emphasis, and RDS/RBDS • Correctly decodes RBDS PI codes into station's call letters • Can handle a mix of RDS and RBDS stations as found near the US boarders with Canada and Mexico • Example programs I2C and Due support is alpha because I do not have hardware to test these features.

...Each rack having 3 temperature sensors. Environmental data accessible a RESTfull interface. Individual sensors addressable via SNMP. The solution is comprised of a custom PCB containing a ATMEGA328P with UNO bootloader. The PCB called envmon board collects the environmental data and outputs it to a Raspberry PI. The Raspberry PI is the head unit providing network access to the data and can be configured with RRDTool/Apache for a complete GUI.

...It has the same features as Megasquirt 1 and can be tuned in MegaTunix, MegaTune or TunerStudio as a Megasquirt 1 B&G2.0-3.0. The code is compiled for the ATmega328p so the supported boards should be: - Arduino Uno - Arduino Duemilanove - Arduino Diecimila - Arduino NG - Arduino Extreme v2 - Arduino Extreme Note: only tested on Arduino Duemilanove No schematics are available yet, but please have a look at the MegasquirtAVR schematics. It is meant for the ATmega128 so not pin compatible.