Search Results for "mega"

...Code or portions of code may not be copied or used without appropriate credit given to author. For a WiFi ESP32 much improved version please see https://sourceforge.net/projects/mysqmproesp32/ AUTHOR NOTE: HIGHLY RECOMMEND YOU USE AN ARDUINO MEGA FOR THIS PROJECT IF ALL OPTIONS ARE CHOSEN YOU CAN RUN OUT OF CODE SPACE ON A NANO

AVR ATmega port of freeRTOS A port of freeRTOS which can be flexibly flexibly configured use almost any available Timer on AVR ATmega devices and will operate with almost any classic Arduino device from Arduino, SeeedStudio, Sparkfun, Freetronics or Pololu. Going forward this repository will be updated less often and only with major releases. Please check at Github for the latest commits. https://github.com/feilipu/avrfreertos The Goldilocks Analogue story is told here....

This library controls many Silicon Laboratories Si47xx family radio chips with an Arduino microcontroller. Major features include: • I2C and SPI bus • Supports "original" (Uno, Duemilanove, and their clones), Mega 2560, Leonardo, and Due Arduinos • FM/AM receive modes; including short, medium, and long wave AM • Analog and/or digital audio output • FM RDS and RBDS • Localization of receive bands, channel spacing, FM de-emphasis, and RDS/RBDS • Correctly decodes RBDS PI codes into station's call letters • Can handle a mix of RDS and RBDS stations as found near the US boarders with Canada and Mexico • Example programs I2C and Due support is alpha because I do not have hardware to test these features.

The goal of the project is the realization of a modular firmware that allows to control a CNC machine with different utensils. For instance, a CNC with a drill, with few changes can become a plotter with a pen or cutting machine to cut cardboard or stickers. In order to do that, we want project a CNC router with a mechanism that allows a fast utensil change and a controlling firmware which can use different utensils changing some configuration parameters.

This is the source code for a 3 port MIDI merger based on an Arduino Mega and a serial LCD display.

...The intend of this project is mainly to control a 5 channel LED light and to remotely monitor the LED heatsink and water temperature. The LED light simulate random cloud, random lightning during cloud and also manage sunrise and sunset. The system is composed of an Arduino mega 1280, an ethernet shield w5100, an LCD keypad shield 1602, a 3,2" TFT touchscreen, a RTC module DS1307 and 3 DS18B20 one wire temperature sensor. Up and running: -16x2LCD display and menu to manage clock, cloud and lightning setup. -3,2" TFT diplaying temperature, led power, led status (cloud, sunrise, sunset...), clock, time of next cloud. ...