Search Results for "management system in java"

Smart GUI to create or update IP-XACT often needed for the IP packaging. It has capability create Bus Definitions from scratch to populate BusDef library. One can create IP-XACT Component, Design or Registers by importing Ip in System Verilog/Verilog-95/VHDL, instantiate Bus Interfaces with proper port maps and attributes as needed. Smart GUI to create IP-XACT Registers, Memory Maps, Address Blocks for IP- has feature to import XLS or Verilog . It has Tcl/Python API...

1. Comes with 200+ high level Tcl commands around SoC platform assembly 2. Easy to start - use the verilog2baya tool to convert existing SoC/SS into Baya 3. Adhoc and Interface based connections 4. Autoconnections 5. Rule based connections between component ports 6. A variety of SoC integration Methodologies 6.a. XLS/CSV Based connections 6.b. Port-to-Port Adhoc connections 6.c. IP-XACT and System Verilog Interface based connections 6.d. ... 7. Maintains a connectivity...

Given a simple net-list describing the high level power architecture of your system Penthode: - simulates the voltage and current from device turn on to the steady state. - highlights components working out of specification - draws a nice power tree diagram showing the currents/powers balance - plots node transient voltage and gate current waveforms It is possible to change component parameters interactively to improve the design

Ycad is a library of CAD functions in Java. Currently only DXF is supported for reading, viewing and writing. The DXF drawing may be rendered to a Graphics object for printing or imaging.

Analog Insydes is a Mathematica toolbox for symbolic analysis of analog electronic circuits. This project provides a set of free add-ons to Analog Insydes, including a Java front-end and a native netlister for Cadence's Analog Design Environment (ADE).

Pipes is a desktop system which analyzes an AutoCad(TM) drawing of a sprinkler system, checks for flaws and after these are eliminated, adds the size/diameter labels to the drawing. Tutorial: http://users.norwoodlight.com/janh/wink/autopipes-entry.htm

...This includes the ability to construct and simulate block diagrams. The visual block diagram interface offers a simple method for constructing, modifying and maintaining complex system models. The simulation engine provides fast and accurate solutions for linear, nonlinear, continuous time, discrete time, time varying and hybrid system designs. With JMCAD, users can quickly develop software or "virtual" prototypes of systems or processes to demonstrate their behavior prior to building physical prototypes. The user builds his system model by selecting predefined blocks from a block library and simply wiring the blocks together. ...

An API for manipulating EDIF netlists in Java. We use this API to analyze netlists as a part of our FPGA reliability project. We intend to keep the API as general as possible to support other netlist analysis and manipulation activities. This material is based upon work supported by the National Science Foundation under Grant No. 0801876. Any opinions, findings, and conclusions or recommendations expressed in this material are those of the author(s) and do not necessarily reflect the...

Virtual instrumentation software, currently designed for modifying automobile engines. Intended as a modular framework to communicate with devices on an IO port (serial, parallel etc.) and allow a visual representation of the instrument.

Open source JTAG/Boundary Scan platform

ECL is a system-level specification language for HW/SW designs and is based on Esterel and C. The ECL compiler parses ECL, writes Esterel and C, and uses the Esterel compiler to produce an implementation. Originally developed at Cadence Berkeley Labs.

O Projeto Cleusa - É uma interface de Gerenciamento de dispositivos. O projeto ROSANA aciona ações nos relês. O projeto Cleusa utiliza uma dispositivo de Hardware especifico, porem pode ser compatibilizado com qualquer outro hardware.

The PARSEC CEE is the primary achievement of several years of effort at NASA's Marshall Space Flight Center. The CEE was developed to allow engineers in the Advanced Concepts Department to rapidly prototype launch vehicle and spacecraft concepts.

This project is aimed to build an Open Source Manufacturing Execution System based on J2EE, JBoss technology. Intesity based optimization

This is an attempt to build an Java GUI for a low cost digital storage oscilosope based on a RS232 interface.

The SESAME (Simulation of Embedded System Architectures for Multilevel Exploration) software system is an embedded system co-simulation environment and research tool which implements the ideas of the SESAME project at the University of Amsterdam.

Generic packet visualization tool for generating flow diagrams from formatted logs. Can be used for cache coherency diagrams, software interaction diagrams or to plot network communications.

Visually build boolean logic circuits and then simulate their operation. Create custom components from user-designed circuits. Written in Java for cross-platform functionality. NOTE: This project has moved to Bitbucket at http://bitbucket.org/kwellwood/circuitsandbox

The MP4Free project provides a simulation, analysis and exploration platform for multi-processor system-on-chip applications at variable level of abstraction, providing also a comprehensive component library.

IslandEv distributes a Genetic Algorithm (like <a href="/projects/jaga">JaGa</a>) across a network (see <a href="/projects/distrit">DistrIT</a>) using an island based coevolutionary model in which neighbouring islands swap migrating individuals every

Netsim is a mobile ad hoc network simulator targeted at large heterogeneous node configurations. It is written in Java and is easily extensible through its modular concept.

GNU PIC LIBRARY PROJECT The interest of this project is to develop a set of Libraries that are released in LGPL License to use to PIC microcontroler programming. Then any program resulted by this use would be a proprietary or free softwares.

A java based digital logic simulator, designed to be used as an educational tool. uses a GUI to allow users to quickly and easily create and visualise circuits from simple components. User can create custom components

This JAVA library give the possibility to have a CANVAS object in JAVA SWING graphical applications, including CANVAS tools such as hand-tool, linker-tool, group-tool like VISIO(TM) application. The library take advantage of Java2D packages to reach a

vIDE is a cross-platform tool for writing and simulating Verilog models. It provides user friendly project management and file editing, integrated simulation engine, waveform viewer, pre-compiled modules, and many other cool features.