Open Source BSD Electronic Design Automation (EDA) Software

Ngspice project aims to improve the spice3f5 circuit simulator.

Qucs is a circuit simulator with graphical user interface. The software aims to support all kinds of circuit simulation types, e.g. DC, AC, S-parameter, Transient, Noise and Harmonic Balance analysis. Pure digital simulations are also supported.

Icarus Verilog is an open source Verilog compiler that supports the IEEE-1364 Verilog HDL including IEEE1364-2005 plus extensions.

Gerbv is an open source Gerber file (RS-274X only) viewer. Gerbv lets you load several files on top of each other, do measurements on the displayed image, etc. Besides viewing Gerbers, you may also view Excellon drill files as well as pick-place file

GNUSim8085 is a simulator and assembler for the Intel 8085 Microprocessor. For downloading latest release please head to the website - https://gnusim8085.github.io/ For source code - https://github.com/GNUSim8085/GNUSim8085

gputils is a collection of tools for Microchip PIC microcontrollers. Its goal is to be fully compatible with Microchip's tools, MPASM, MPLINK, and MPLIB.

UrJTAG aims to create an enhanced, modern tool for communicating over JTAG with flash chips, CPUs, and many more. It is a descendant of the popular openwince JTAG tools with a lot of additional features and enhancements.

Circuitmod is a circuit simulator that extend the capacity of the original Falstad's Java Circuit Simulator into CMOS Chips, Led Arrays, Led Matrix and PIC Programming. The Horizon is limitless. Try today.

A multiplatform vector drawing program with a complete library of electronic symbols. Schematics and drawings are stored in a very compact text format. There is no netlist concept behind the drawings (so no simulation, and this is a choice) but this allows a great graphical flexibility and ease of use, making FidoCadJ the perfect tool for exchange sketches in forum and newsgroup discussions with a few clicks. Drawings can be exported in several graphic formats, such as pdf. Follow the development live on Twitter: https://twitter.com/davbucci

PCB is a tool for the layout of printed circuit boards. PCB can produce industry standard RS-274X and Excellon NC-Drill format output for submission to board manufacturers.

gpsim is an open sourced simulator for Microchip's PIC microcontrollers. It supports all three families of PICs: 12-bit, 14-bit, and 16-bit cores. See also gputils http://gputils.sourceforge.net/

AUDio MEasurement System - a multi-platfrom system for audio measurement through sound card in the PC. It contains: generator, oscilloscope, audio spectrum analyzer (FFT) and frequency sweep plot. Compiles and works under Linux, Windows and MacOS. Source code is available in "git" and as ZIP snapshot. For more information see README.md

Xschem is a schematic capture program, it allows to create a hierarchical representation of circuits with a top down approach . By focusing on interconnections, hierarchy and properties a complex system (IC) can be described in terms of simpler building blocks. A VHDL, Verilog or Spice netlist can be generated from the drawn schematic, allowing the simulation of the circuit. Key feature of the program is its drawing engine written in C and using directly the Xlib drawing primitives; this gives top speed performance, even on very big circuits. I have succesfully managed to simulate complete VLSI projects with this tool, both digital (Verilog / VHDL) and analog (Spice). Schematics can be printed in SVG, PNG, PDF, formats. XSCHEM runs on Linux or other Unix-likes with Xorg server and on Windows with the Cygwin layer and required tools installed. Can be found also on github: https://github.com/StefanSchippers/xschem

KTechlab is an IDE for microcontrollers and electronics.

Sparse is a direct method solver for the large sparse matrices that are associated with electrical circuit simulation. It uses LU factorization and handles both real and complex square matrices.It is intended to solve many matrices with the same structure

DLD V 2.0 Released Digital Logic Design is a Software tool for designing and simulating digital circuits. It provides digital parts ranging from simple gates to Arithmetic Logic Unit. You may start your circuit from simple gates and flipflops and keep on converting them into ICs. These ICs, later on, may be incorporated into other circuits to built more complex circuits like CPU. You may even use SOP expressions to generate digital circuits in IC form. You can use this software to design Combinational, Synchronous and Asynchronous Sequential Circuits. The circuit working can be analyzed by using output parts like LEDs, Seven Segment Display as well as CRT and digital Oscilloscope all provided in the software. This Software may be used by professionals, hobbyists and students alike. The teachers may incorporate this software in their courses like Digital Logic and Computer Design, Computer Architecture, Computer Organization and Embedded Systems.

TimingEditor is a tool to graphically draw and edit timing diagrams.

A graphical tool for designing finite state machines and exporting them to Hardware Description Languages, such as VHDL, AHDL, Verilog, or Ragel/SMC files for C, C++, Objective-C, Java, Python, PHP, Perl, Lua code generation.

The project development has been moved on GitHub https://github.com/pcb2gcode/pcb2gcode The GUI for pcb2gcode can be found here https://github.com/pcb2gcode/pcb2gcodeGUI pcb2gcode is a command-line tool for isolation, routing and drilling of PCBs that provides full support for both single- and double-sided boards. For more information, see http://sourceforge.net/apps/mediawiki/pcb2gcode/

Please go to https://github.com/f18m/netlist-viewer for most updated code

A Binary Decision Diagram library, with : many highly efficient vectorized BDD operations, dynamic variable reordering, automated garbage collection, a C++ interface with automatic reference counting, and much more.

MMTL, the Multilayer Multiconductor Transmission Line 2-D and 2.5-D electromagnetic modeling tool suite, generates transmission parameters and SPICE models from descriptions of electronics interconnect dimensions and materials properties.

GHDL is the leading open source VHDL simulator. *** Now on github.com/tgingold/ghdl *** We have binary distributions for Debian Linux, Mac OSX and Windows. On other systems, getting GHDL from here means downloading the current source package and building GHDL from source. Alternatively you can get the latest source version (warning : occasionally unstable!) by pulling a snapshot from the git repository.

GNU SPICE GUI provides a GUI front-end for various freely available electronic circuit simulation engines ie. NG-SPICE and GNU-CAP. It's core function is to generate simulation engine instructions based on user input. However, it also offers extra functionality via applications and utilities developed by others. Electronic Design Automation (EDA) tool suites are used to provide schematic capture and editing, and schematic to netlist conversion. Waveform data viewers are used to display simulation results and PDF viewers to display user manuals.

This project aims to develop an opensource software with an attractive and efficient GUI which allows to design linear electronic circuits and to characterize existing ones.