Search Results for "open-ssl"

ExpressLRS is an open-source radio-control link system designed for low latency, long range, and high update rates. It supports 2.4 GHz, 900 MHz, and dual-band radio hardware from many manufacturers. Packet rates can reach up to 1000 Hz on supported configurations. Receivers can expose protocols including CRSF, SBUS, SUMD, HoTT telemetry, MAVLink, and PWM.

DroneBridge for ESP32 is lightweight firmware that turns inexpensive ESP32 boards into wireless telemetry links for drones and other vehicles. It bridges serial data to standard Wi-Fi, Wi-Fi Long Range, ESP-NOW, or Bluetooth Low Energy. MAVLink, MSP, LTM, and arbitrary serial payloads can be transported through the system. Standard Wi-Fi can reach roughly 150 meters, while compatible ESP-NOW or long-range Wi-Fi setups can extend much farther. Traffic can be encrypted with AES-256-GCM,...

ESP-Drone is an open-source quadcopter platform built around Espressif ESP32, ESP32-S2, and ESP32-S3 microcontrollers. It combines lightweight hardware with firmware derived in part from the Crazyflie project. Pilots can control the drone through a mobile application or compatible gamepad over wireless connections. Stabilize mode provides basic assisted flight, while additional hardware enables height-hold and position-hold modes.

dRonin is an open-source autopilot and flight-controller firmware for hardware derived from the OpenPilot and Tau Labs ecosystems. It is designed for acrobatic flying, racing, autonomous flight, and vehicle research. The project supports a broad range of flight-control boards, including OpenPilot Revolution, BrainFPV, Sparky, Quanton, and several racing-oriented controllers.

The DTC (Drone Traffic Control) project for air traffic drones. It also utilizes DGPS for accurate position measurement of the drones.