Search Results for "mac"
Sort By:
14 projects for "mac" with 2 filters applied:
-
$300 Free Credits to Build on Google CloudPut your $300 in credit toward real workloads, then keep building with free monthly usage for 20+ products. No commitment and no charge until you upgrade.
-
Custom VMs From 1 to 96 vCPUs With 99.95% UptimeLive migration and automatic failover keep workloads online through maintenance. One free e2-micro VM every month.
-
1
ArduPilot
ArduPlane, ArduCopter, ArduRover, ArduSub source
ArduPilot is an open-source autopilot platform for autonomous and remotely operated vehicles. It supports airplanes, multicopters, helicopters, rovers, boats, submarines, balance bots, and other specialized vehicle types. Separate vehicle stacks include ArduPlane, ArduCopter, Rover, ArduSub, and Antenna Tracker. The software provides manual-assisted modes as well as fully autonomous missions with waypoint navigation and scripted behavior. Advanced failsafes can react to lost control links,... -
2
DroneBridge for ESP32
Secure & transparent telemetry link with support for WiFi and ESP-NOW
DroneBridge for ESP32 is lightweight firmware that turns inexpensive ESP32 boards into wireless telemetry links for drones and other vehicles. It bridges serial data to standard Wi-Fi, Wi-Fi Long Range, ESP-NOW, or Bluetooth Low Energy. MAVLink, MSP, LTM, and arbitrary serial payloads can be transported through the system. Standard Wi-Fi can reach roughly 150 meters, while compatible ESP-NOW or long-range Wi-Fi setups can extend much farther. Traffic can be encrypted with AES-256-GCM,... -
3
Flix
Making an ESP32-based quadcopter from scratch
Flix is an open-source ESP32-based quadcopter project built from general-purpose components for education, research, and experimentation. Its firmware is written in Arduino-style C++ and intentionally kept compact so learners can understand the complete flight-control stack. Communication uses MAVLink over Wi-Fi or ESP-NOW. The drone can be controlled with a USB gamepad, radio controller, or smartphone. A wireless command-line interface supports configuration and analysis without a wired... -
4
WebODM
User-friendly, commercial-grade software for processing aerial imagery
WebODM is an open-source, user-friendly application for processing aerial imagery into mapping and 3D products. It can generate georeferenced maps, point clouds, elevation models, textured 3D models, and Gaussian splats. Its interface is designed to make photogrammetry workflows accessible without requiring direct command-line operation. Processing can be handled by several supported engines, including ODX, MicMac, and LGT. The current project has formally separated from OpenDroneMap and no... -
PRTG Catches Network Issues Before They Cause DowntimeReactive troubleshooting usually means hearing about a problem from frustrated users, not your monitoring tool. PRTG sets threshold-based alerts across devices, servers and applications, notifying your team by email, SMS or push the moment a metric crosses a set limit. That means catching a failing disk or overloaded server before it becomes an outage and getting time back from firefighting. Start a free trial and set your first alerts today.
-
5
dRehmFlight
Teensy/Arduino flight controller & stabilization for small-scale VTOL
dRehmFlight is an Arduino-compatible flight controller created for hobbyists, researchers, and learners building unusual VTOL aircraft. It emphasizes readable, centralized code instead of a large framework spread across many files and classes. The project is designed to teach aircraft stabilization and flight-control concepts while remaining easy to modify. Its primary hardware platform uses a Teensy 4.0 microcontroller and an MPU6050 six-axis IMU. Features include receiver input handling,... -
6
ESP-Drone
Mini Drone/Quadcopter Firmware for ESP32 and ESP32-S Series SoCs
ESP-Drone is an open-source quadcopter platform built around Espressif ESP32, ESP32-S2, and ESP32-S3 microcontrollers. It combines lightweight hardware with firmware derived in part from the Crazyflie project. Pilots can control the drone through a mobile application or compatible gamepad over wireless connections. Stabilize mode provides basic assisted flight, while additional hardware enables height-hold and position-hold modes. The project supports the Crazyflie client ecosystem and... -
7
ExpressLRS
High Performance Open Source Radio Control Link
ExpressLRS is an open-source radio-control link system designed for low latency, long range, and high update rates. It supports 2.4 GHz, 900 MHz, and dual-band radio hardware from many manufacturers. Packet rates can reach up to 1000 Hz on supported configurations. Receivers can expose protocols including CRSF, SBUS, SUMD, HoTT telemetry, MAVLink, and PWM. Firmware updates can be delivered over Wi-Fi, while Bluetooth or Wi-Fi modes can emulate a simulator joystick. Bind phrases simplify... -
8
FASTER
3D Trajectory Planner in Unknown Environments
FASTER is a research-grade 3D trajectory planner for autonomous navigation in unknown environments. It was developed for both aerial robots and ground vehicles that must move safely while new obstacles are discovered. The planner continuously builds safe and unknown-space trajectory segments rather than assuming the environment is fully mapped. Optimization is used to generate dynamically feasible paths while maintaining safety constraints. The project integrates with ROS, Gazebo, MAVROS,... -
9
PilottAI
Python framework for building scalable multi-agent systems
pilottai is an AI-based autonomous drone navigation system utilizing reinforcement learning for real-time decision-making. It is designed for simulating and training drones to fly safely through dynamic environments using AI-based controllers. -
Ship Agents FasterGemini Enterprise Agent Platform lets you rapidly build, scale, govern and optimize production-ready agents grounded in your organization's data. The platform enables developers to build custom or pre-built agents for virtually any use case. New customers get $300 in free credits.
-
10
Flask RESTful Example
Flask backend development interface example, using Flask
Flask RESTful Example is a practical Python backend reference showing how to build production-style APIs with Flask. It covers application configuration, standardized responses, logging, database access, authentication, background tasks, and deployment. MySQL and Redis examples demonstrate relational storage and caching workflows. Authentication examples include JWT, mobile verification codes, and WeChat-based login scenarios. Reporting modules generate Excel, Word, PDF, and hierarchical... -
11
DroneSploit
Drone pentesting framework console
DroneSploit is a Python command-line framework for authorized security testing of drones and related wireless systems. Its interface is modeled after Metasploit to provide a familiar module-oriented workflow for security researchers. The framework gathers drone-specific assessment techniques and security modules in one console. Individual modules activate only when their required external tools and dependencies are available. Its architecture is built on the SploitKit framework and can be... -
12
gym-pybullet-drones
PyBullet Gymnasium environments for multi-agent reinforcement
Gym-PyBullet-Drones is an open-source Gym-compatible environment for training and evaluating reinforcement learning agents on drone control and swarm robotics tasks. It leverages the PyBullet physics engine to simulate quadrotors and provides a platform for studying control, navigation, and coordination of single and multiple drones in 3D space. -
13
GAAS
GAAS is an open-source program designed for fully autonomous VTOL
GAAS, or Generalized Autonomy Aviation System, is an open-source autonomy framework for drones, VTOL aircraft, and experimental flying-car research. It focuses on robust autonomous navigation using lidar rather than relying primarily on vision. The system includes mapping, HD-map localization, path planning, obstacle handling, and aircraft-control modules. Localization components include NDT and ICP approaches, with GPU acceleration available for selected algorithms. Simulation support... -
14
ar-drone
A node.js client for controlling Parrot AR Drone 2.0 quad-copters
ar-drone is a Node.js client library for controlling Parrot AR.Drone quadcopters over their network protocol. It provides a high-level API for common flight operations such as takeoff, landing, altitude changes, rotation, directional movement, and hovering. Programs can receive navigation telemetry including flight state, altitude, and other sensor data. Camera output can be accessed as raw video streams or converted into PNG frames through FFmpeg. The library also exposes predefined flight...
- Previous
- You're on page 1
- Next
