Search Results for "version control"

ArduPilot is an open-source autopilot platform for autonomous and remotely operated vehicles. It supports airplanes, multicopters, helicopters, rovers, boats, submarines, balance bots, and other specialized vehicle types. Separate vehicle stacks include ArduPlane, ArduCopter, Rover, ArduSub, and Antenna Tracker. The software provides manual-assisted modes as well as fully autonomous missions with waypoint navigation and scripted behavior. Advanced failsafes can react to lost control links,...

ExpressLRS is an open-source radio-control link system designed for low latency, long range, and high update rates. It supports 2.4 GHz, 900 MHz, and dual-band radio hardware from many manufacturers. Packet rates can reach up to 1000 Hz on supported configurations. Receivers can expose protocols including CRSF, SBUS, SUMD, HoTT telemetry, MAVLink, and PWM. Firmware updates can be delivered over Wi-Fi, while Bluetooth or Wi-Fi modes can emulate a simulator joystick. Bind phrases simplify...

dRehmFlight is an Arduino-compatible flight controller created for hobbyists, researchers, and learners building unusual VTOL aircraft. It emphasizes readable, centralized code instead of a large framework spread across many files and classes. The project is designed to teach aircraft stabilization and flight-control concepts while remaining easy to modify. Its primary hardware platform uses a Teensy 4.0 microcontroller and an MPU6050 six-axis IMU. Features include receiver input handling,...

ESP-Drone is an open-source quadcopter platform built around Espressif ESP32, ESP32-S2, and ESP32-S3 microcontrollers. It combines lightweight hardware with firmware derived in part from the Crazyflie project. Pilots can control the drone through a mobile application or compatible gamepad over wireless connections. Stabilize mode provides basic assisted flight, while additional hardware enables height-hold and position-hold modes. The project supports the Crazyflie client ecosystem and...

"Drone WayPointer" is a ROS package that provides a UI to allow for remote control of the Parrot AR Drone 2.0. It is developed in C++ with qt-ros and the Qt4 Development FrameWork. It is designed to work with the ROS - Fuerte and it uses the the ardrone_autonomy driver (Fuerte-devel Branch). It has so far only been tested on the tum_simulator and not on the actual drone. The main functionalities it provides is camera streams of front or bottom cameras of the drone, button and slider control...

...Parrot sells the drone as a toy controlled via a wireless device such as Ipods, Ipads, or Android based devices. Parrot advertises the toy as an advance in gaming because the control devices will project a virtual reality allowing users to play with their physical drone with an enhanced version on their controller where bullets or hot air balloons must be avoided in the virtual world. KIPR, KISS Institute for Practical Robotics is an organization that facilitates the learning of robotics programming in middle and high school students to peak an interest in computer science. ...