Search Results for "c--"

This is an official mirror of FreeCAD. Code and release files are primarily hosted on https://github.com/FreeCAD/FreeCAD and mirrored here. FreeCAD is a general purpose feature-based, parametric 3D modeler for CAD, MCAD, CAx, CAE and PLM, aimed directly at mechanical engineering and product design but also fits a wider range of uses in engineering, such as architecture or other engineering specialties. It is 100% Open Source and extremely modular, allowing for very advanced extension and...

LibreCAD is an open-source cross-platform 2D CAD program, which is translated in over 30 languages. LibreCAD is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License version 2. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. License: https://www.gnu.org/licenses/gpl-2.0.html Source:...

TexGen is a geometric textile modelling software package to be used for obtaining engineering properties of woven textiles and textile composites. Citing TexGen We would be grateful if you could acknowledge use of TexGen where appropriate and suggest using one of the following references: L P Brown and A C Long. "Modelling the geometry of textile reinforcements for composites: TexGen", Chapter 8 in "Composite reinforcements for optimum performance (Second Edition)", ed. P Boisse, Woodhead Publishing Ltd, 2021, ISBN: 978-0-12-819005-0. https://doi.org/10.1016/B978-0-12-819005-0.00008-3 Lin, H., Brown, L. P. & Long, A. C. 2011. Modelling and Simulating Textile Structures using TexGen. ...

FRAME3DD is a program for the static and dynamic structural analysis of two- and three-dimensional frames and trusses with elastic and geometric stiffness.

...It is not a CAD system but a GObject-based library where a custom application can put common CAD entities such as paths, hatches and dimensions, to automatically create technical drawings. A demo application is provided in order to show the capabilities of the canvas. Although it is possible to interact with the library directly in C (that is what the adg-demo program is doing), the canvas is expected to be used from higher level languages, much in the same way as what done in the GNOME stack. Lua bindings based on LGI are already provided out of the box. The adg-lua project, downloadable from the "Files" section, provides Lua programs and demos that leverages these bindings.

The OpenMultiphysics project is the home for community-driven development of application integration technologies designed to aid in the design and implementation of multiphysics simulation capabilities. Design and development in this project is driven by the Consortium for Open Multiphysics. Feel free to visit us at our GitHub site as well: https://github.com/IllinoisRocstar/IMPACT

A tool for CNC toolpath generation. Model data in, G-Codes out. The system is kept as generic as possible. Machines with up to 9 axis can be defined. Machine simulator included.

...Its computational engine is based, among others, on the Lattice Boltzmann Methods (http://en.wikipedia.org/wiki/Lattice_Boltzmann_methods) and is written in OpenCL (http://en.wikipedia.org/wiki/OpenCL) which enable extraordinarily efficient deployment (http://asl.org.il/benchmarks) on a variety of massively parallel architectures, ranging from inexpensive FPGAs, DSPs and GPUs up to heterogeneous clusters and supercomputers. The engine is hidden entirely behind C++ classes, so that no OpenCL knowledge is required from application programmers. ASL can be utilized to model various coupled physical and chemical phenomena and employed in a multitude of fields: computational fluid dynamics, virtual sensing, industrial process data validation and reconciliation, image-guided surgery, computer-aided engineering, high-performance scientific computing, etc..

Explicit/Impicit Finite Element Program with linear/nonlinear, elastic/hyperelastic/hypoelastic/plastic/visco, contact,thermal, fluid capabilities. h/p refinements. Parallel/Distributed solvers available. No shell elements but has 2D beams, trusses.

FAST is an Analysis and Simulation Toolbox (FAST) for Fuel Cells (FC) FAST-FC is the doctorate work of David B. Harvey and was developed with support from the U.S. DOE, Ballard, and Queen's University. Derivative works of FAST-FC include FC-APOLLO which is a forked branch of this project intended to capture the code state at the exit of the funded DOE project. FAST-FC is the open and active community branch. FAST-FC is developed and maintained by the original creator and...

finFoil is an application to help amateur surfboard fin makers foil their fins properly. All downloads are moved to https://finfoil.io Check out the homepage for the latest news and tutorials: https://finfoil.io hrobeers

GeoPDEs is a suite of software tools for research on Isogeometric Analysis of PDEs. GeoPDEs is free software implemented in Octave and fully compatible with Matlab. GeoPDEs is no longer developed at SF, and has moved to GitHub. Please visit http://rafavzqz.github.io/geopdes/ The mailing list will remain active. Releases up to 2.0.4 can be found here. From version 2.1.0 onward, see https://github.com/rafavzqz/geopdes

Voxel CAD. Open source voxel editing and analyzing software. Edit and create multi-material voxel objects. Simulate the dynamics in a quantitative physics sandbox to test engineering designs or make moving creatures. www.voxcad.com for videos.

The 1-dimensional gas-dynamics code. More information in http://www.openwam.com Modeling is an important technique for the optimization of internal combustion engines (ICE). The use of calculation models together with experimental tests is producing unquestionable successes due to the fact that both techniques complement each other. 1D wave action models simplify the engine by means of ducts, where only one dimension is considered, and volumes where mass accumulation is considered and...

Library for creating and analyzing voxel objects. This project has moved to github. https://github.com/jonhiller/Voxelyze

A robotic DIY styrofoam cutter consisting of one rotational and two translational axes. It cuts a variety of shapes out of styrofoam-like materials using a hot wire. This project documents the necessary hardware and software parts. Don't miss the follow-up project at http://raumschaum.org Its goal is to further develop hardware and software into an user friendly application.

The count of vehicles is a key task in traffic gauging, as it provides information for designing new roads. This software presents an algorithm to detect and track vehicles in real time or from a video file.

MCF - Models Construct Framework

CSGCAD is a CAD application written in Qt/C++ that renders 3D graphics using a constructive solid geometry engine based on GLSL. This application is still far from completion, help is welcome

Software application, firmware and U.I. for 4-motors 3-axis milling machine, open hardware, software and mechanics. See also project in details for schematics and images on http://www.contesti.eu/opensource/xyz-dc-motor-controller

Easy to use 3D truss analyzer using finite element methods.

A free, multi-layered, multi-license cad engine. You are free to use the core classes.

The openLBMflow is an fast fluid flow solver based on Lattice Boltzmann Method. Main future are 2D and 3D code, single and multiphase models, Output data in VTK format can be directly open in Paraview. Download Windows or Linux binary version now.

Yet Another Computer-Assisted Design software

IdCREATE stands for "Idea Creation, Representation & Execution Automated Tools and Engine". This is intended to be a graphical tool for 1) representing your thoughts and ideas in a mindmap-like charts and 2) implementing them as code, article text, etc