Search Results for "radio"
Sort By:
Showing 169 open source projects for "radio"
View related business solutions-
MongoDB Atlas runs apps anywhereMongoDB Atlas gives you the freedom to build and run modern applications anywhere—across AWS, Azure, and Google Cloud. With global availability in over 115 regions, Atlas lets you deploy close to your users, meet compliance needs, and scale with confidence across any geography.
-
$300 Free Credits for Your Google Cloud ProjectsLaunch your next project with $300 in free Google Cloud credits—no strings attached. Test, build, and deploy without risk. Use your credits across the entire Google Cloud platform to find what works best for your needs. After your credits are used, continue with always-free tier services. Only pay when you're ready to scale. Sign up in minutes and start exploring.
-
1
URH (Universal Radio Hacker)
Universal Radio Hacker: Investigate Wireless Protocols Like A Boss
Universal Radio Hacker (URH) is a tool for investigating unknown wireless communication protocols. It supports signal capturing, decoding, modulation analysis, and protocol reverse engineering through an intuitive graphical interface. URH is used in research, security testing, and hobbyist electronics for understanding proprietary RF systems, IoT device communication, and embedded protocols. -
2
HackRF
Low cost software radio platform
This repository contains hardware designs and software for HackRF, a low-cost, open source Software Defined Radio platform. HackRF One from Great Scott Gadgets is a Software Defined Radio peripheral capable of transmission or reception of radio signals from 1 MHz to 6 GHz. Designed to enable test and development of modern and next-generation radio technologies, HackRF One is an open-source hardware platform that can be used as a USB peripheral or programmed for stand-alone operation. ... -
3
OpenGNB
GNB is open source de-centralized SDVN to achieve layer3 network
OpenGNB is an open-source implementation of a 5G NR (New Radio) gNodeB base station, aimed at democratizing access to mobile communication infrastructure. Built using SDR (Software Defined Radio) principles, it allows researchers, developers, and enthusiasts to deploy and experiment with 5G RAN technology using commodity hardware. OpenGNB integrates with open-core networks and provides a valuable tool for advancing innovation in private 5G networks, research labs, and rural communication deployments. -
4
-
Build Agents and Models on One PlatformGemini Enterprise Agent Platform is Google Cloud's comprehensive platform for developers to build, scale, govern, and optimize agents and models. Choose from Google's most advanced models and third-party models like Anthropic's Claude Model Family.
-
5
Ham Radio Control Libraries
Library to control radio transceivers and receivers
The Hamlib project's purpose is to develop flexible and portable shared libraries that offer a standardized API to control any radio oriented equipment through a computer interface. -
6
KB1OIQ - Andy's Ham Radio Linux
Install ham radio software on Debian Live, RPi OS, or Ubuntu Linux
...Please download and read the bug workarounds file: https://sourceforge.net/projects/kb1oiq-andysham/files/v27/V27_Bug_Workarounds.txt Please download and READ the installation instructions: https://sourceforge.net/projects/kb1oiq-andysham/files/v27/GETTING_STARTED Watch a video of Andy (KB1OIQ) as he talks about AHRL during a ham radio convention in MA in the summer of 2025: https://www.youtube.com/watch?v=hwuKZK1dKcU&t=2086s Several videos of Andy's complete AHRL presentation can be found on YouTube. Here is one made in March 2026: https://youtu.be/xv9YnREmeAA?si=yMTX8yJsQFyeJG0i -
7
-
8
fldigi
Ham Radio Digital Modem Application
Fldigi is a modem program for most of the digital modes used by radio amateurs today: CW, PSK, MFSK, RTTY, Hell, DominoEX, Olivia, and Throb are all supported. It can help calibrate a sound card to a time signal and do frequency measurement tests. NOTICE: You must proceed to the Files section to locate the correct fldigi, flrig etal download for your particular operating system. Do not blithely use the big green Download button! -
9
WSJT
Weak signal ham radio communication
The WSJT project implements software for amateur radio communication using state-of-the-art digital techniques. Typical applications involve "DXing" at LF, MF, HF, and VHF+ frequencies, including meteor scatter and EME ("moonbounce"). Major emphasis is placed on weak-signal techniques. Summary Program Descriptions: WSJT-X supports the communication protocols FST4, FT4, FT8, JT4, JT9, JT65, Q65, MSK144, WSPR, FST4W, and Echo, each optimized for different sorts of radio-wave propagation. ... -
99.99% Uptime for MySQL and PostgreSQL DatabasesCloud SQL Enterprise Plus delivers near-zero downtime with 35 days of point-in-time recovery. Supports MySQL, PostgreSQL, and SQL Server.
-
10
MBR Live Radio Player
Transform your WP site into a professional radio streaming platform
...You can even create unlimited sticky radio players. No subscriptions, no external services, just gorgeous radio streaming that works flawlessly on any device. -
11
Client software for users of the Automatic Packet Reporting System amateur radio network.
-
12
hamclock-next
Full re-write of hamclock in SDL2
-
13
The Ground Station Software Suite projects aims at providing free, useful software tools for ham radio operators. Currently, these projects used to host the Grig communication radio control and Gpredict. The source repositories have been moved over to GitHub.
-
14
Open source libraries and utilities to support using digital signatures for Amateur radio QSL information.
-
15
70cm-ham-radio-fox-hunt-receiver
70cm Amateur Radio Fox Hunt CW receiver - Heltec V3 ESP32 LoRa Board
This project is intended to be coupled with my other LoRa board based project, 70cm Ham Radio Fox Hunt Beacon, which can be found at the link below: https://lora-ham-fox-hunt-beacon-70cm.sourceforge.io The receiver, also ESP32 LoRa-based, is designed for simplicity and accessibility, requiring minimal user setup. It features an OLED display providing real-time frequency readout and received signal strength indication (RSSI), presented numerically in dBm, as an S-meter value, and via a graphical bar. ... -
16
unixcw
Morse code library and applications for GNU/Linux
Umbrella project for cw, cwcp, xcwcp, cwgen programs, and for libcw library. -
17
MFJ-993b Web Remote
Arduino Mega 2560 + Ethernet Shield to control 8 Relays for MFJ-993b
Arduino Mega 2560 Code with a standard Ethernet Shield that drives Relays to control a MFJ-993b Autotuner remotely. Supports Up and Down for manual L and C Tuning, Autotune On/Off, Antenna Selection 1/2 and 100ms Short /1000ms Long for Tune. Op Note 1: You may need additional power for the 5V relay board; sometimes you can power the 5V relay board from the Mega 2560 - but reset/start the device first and then connect power to the relay board. Op Note 2: You will need determine... -
18
SmallPortableRotator
Portable rotator for amateur satellite tracking
Small Portable Rotator: a simple, lightweight, self-consistent antenna rotator for amateur radio satellite tracking, plus an optional portable controller. *** CHANGELOG *** [version 1.0]: - Added tighter control over rotation limits - Fixed some minor bugs - With the 'V' command the version is displayed and no longer the "built filename" -
19
OHHamLogger
OHHamLogger on helppokäyttöinen radioamatöörilokiohjelma,
...Tiedostonimi muodostuu automaattisesti: OMAKUTSU@WWFF-ALUE.adi Tiedostomuodot Tuetut formaatit ADI (.adi) - Täysi tuki versio 3.1.0 Text (.txt) - Perustekstitiedostot OHHamLogger is an easy-to-use amateur radio logging program that supports ADI 3.1.0 format and WWFF log storage. The program is designed specifically for Finnish amateur radio operators, but also supports the English language. -
20
WSJT-X_IMPROVED is published by Uwe Risse, DG2YCB. It is an enhanced edition of the excellent WSJT-X software by Joe Taylor K1JT, Steve Franke K9AN, Bill Somerville G4WJS, myself and others (https://sourceforge.net/projects/wsjt/) that provides several additional features and improvements, as well as more frequent updates and bug fixes. Notes: wsjt-x_improved is experimental and is licensed under GNU GPL v3 (https://www.gnu.org/licenses/gpl-3.0.txt). I am not aware of any adverse...
-
21
═══════════ ▲▲▲ ═════════════════════════════════════════════ Find the various versions on the "Files" tab (https://sourceforge.net/projects/jtdx-improved/files/) jtdx_improved is an enhanced version of JTDX by Igor Chernikov et al. (https://sourceforge.net/projects/jtdx/). Both my and Igor's forks are based on the excellent WSJT-X software by Joe Taylor K1JT, Steve Franke K9AN, Bill Somerville G4WJS, myself and others (https://sourceforge.net/projects/wsjt/). After the succes of my...
-
22
Wait and Pounce FT8
Wait to decode callsigns, then call them using UDP protocol
Neat alternative for JTAlert. Available for both Apple and Windows (10+). Make sure to automatically call any Wanted callsigns specified. Can also be used to monitor band opening. Can handle callsign exclusions. Can even handle wanted callsigns according to your worked before Rules. -
23
The POTA File Cleaner takes an adi file exported from logging software and removes all superfluous aid fields from each QSO record in the log while preserving the minimum adi fields necessary for POTA activator log uploads and organizes the fields for easy review if there are any issues uploading the activator log to the POTA App site. This updated version will also automatically generate an adi file for multi-park (n-fer) activations by listing all park numbers separated by a...
-
24
MATTA
Morse Code Utilitiies to convert text messages to & from sound files.
This is a commandline utility that converts a WAV sound file containing morse code to English text. Pre-built binaries run on OSX, MsWindows, & GNU/linux. It is written in Ada, so can be rebuilt on any platform with an Ada compiler. The input wav file must be monaural, with a 16-bit signed integer encoding, and a sample rate of 8000 Hz. Either sox or audacity can easily transform to this format. The wav file is expected to be international morse code, preferrably clean and properly... -
25
IO91pm
Command-line calculator for Maidenhead- (QTH-, QRA-) Locators.
Keywords: Hamradio, Radio-amateurs, Maidenhead-, QTH-, (QRA-), Locator, Distance and Bearing Calculator, GNU/Linux command-line, LaTeX,- UTF-8-, ASCII-output, GPLv3; based on GM4ANB's book. "IO91pm is the Maidenhead-Locator for Maidenhead" ========================================= Background --------------- * For another little project, I wanted a QTH-Locator calculator for the UNIX (GNU/Linux, bash) command-line
