Search Results for "usb to serial ports manager"

.../?s=Goldilocks+Analogue The Goldilocks 1284p story is here. http://feilipu.me/2013/03/08/goldilocks-1284p-arduino-uno-clone/ If this repository is too complicated to get started, a minimum AVR freeRTOS configured using the Watchdog Timer and Heap 3 is also also available. https://github.com/feilipu/miniAVRfreeRTOS For the Arduino platform there is a freeRTOS Library available in the Arduino IDE Library manager. https://github.com/feilipu/Arduino_FreeRTOS_Library

... on the PIC16F877A microcontroller running with a 20MHz clock. The maximum sampling rate is 1 MHz with a 5 Mhz equivalent sampling mode. Currently, the computer interface supports USB, serial, and parallel ports. Good luck on the construction and I hope you enjoy your oscilloscope. I am happy to answer any questions or provide technical support for this design.

Using the six serial ports of the PIC32 and its USB capabilities, the target of this project is to use a PIC32 as a sniffer on 3 pair of other serial communications and bring back all this data to a PC via USB port. It is made using MPLABX, Harmony and xc32 compiler.and .

.../unixwz0r # Info: The Live ISO is under 700mb and can be put on a CD-R/DVD-R/USB and boot up on any x86 & x86_64 PC computers. Fluxbox has a simular config to FluxBSD, and Fluxbox has been updated to 1.3.7. # IRC Freenode: irc.freenode.net #bsdgeekclub @UNIXwz0r (owner) Tux Hat Linux Project # More Screenshots http://ipodpunker.deviantart.com

Serial ports are a classic way for computers and peripheral devices to communicate. Originally modems, printers and laboratory equiptment had serial ports. The serial ports were hardware chips with known addresses. Modern computers and devices often use USB to emulate serial communications. This works well, except the device has a serial address (e.g. ttyUSB0) and a USB address. tty2usb is a utility that probe system information to display the link between USB and serial addresses.

ATMEL ATMega1280 based powerful, multifunctional, reliable, expandable and extremely flexible hardware platform for home and industrial processes automation, robotic toys, security systems, education and enjoyment.

This is a simple command line tool to customize CP2103 USB to UART bridge controllers in home-grown hardware. VID, PID, product name string, serial number string, and release version of the device can be changed next to GPIO port modes.