Search Results for "pcb"

PCB is a tool for the layout of printed circuit boards. PCB can produce industry standard RS-274X and Excellon NC-Drill format output for submission to board manufacturers.

Watchy, an open-source E-Ink smartwatch. Watchy is an E-Paper watch with open-source hardware and software. It has a barebones design utilizing the PCB as the watch body, allowing it to be worn as-is, or further customized with different 3D printed cases and watch straps. It is a unique timepiece that is also a wearable development platform, allowing users to create their own experience. Ultra-low-power e-paper 1.54″ display with 200 x 200 resolution and wide viewing angle. Wi-Fi & Bluetooth LE...

Coordinate rotation is useful when making PCB with 2+ layers. Based on a reference points (which are included in PCB production files during DIY manufacture) it is possible to layout different PCB layers during drilling, UV exposing, gluing &final cut. Each time PCB was dismounted from a CNC and mounted again, it will have some angle of rotation over a zero point (X=0, Y=0). Manual measurement of this rotation angle is performed with help of laser module mounted on the same CNC. For each...

#4z - BiTuner Controller (STM32L476) for a symmetric antenna matcher - the DL0WH solution. Relay PCB is taken from the DJ0ABR solution at this point of time.

AVR128DA /Atmega128 microcontroller based open source EID smartcard with RSA (512-2048) and ECC (prime192v1, prime256v1, secp384r1, secp521r1 and secp256k1) support. Compatible with MyEID card from Aventra. Supported in windows and linux by opensc package. Allow about 64KiB space for keys/certificates. PKCS#15 structure supported. USB token with CCID interface based on xmega128a4u with same features as card. High speed AVR multiple precision arithmetic: squaring, multiplication, exponentiation.

An STM32 Nucleo-144 development board with Arduino Uno Rev3 connectivity is interfaced via an EastRising Technology Co Ltd Shield PCB to the East Rising 800x480 pixel 7 inch LCD panel with resistive touch screen. A set of functions has been developed to drive the panel via SPI, which uses the RAiO Technology Inc RA8875 TFT-LCD controller IC. Test firmware was developed that uses this function set to explore and demonstrate the many capabilities of the panel. The STM library is used along...

... =============== Now it is working and the SVN repositories has it all: Schematics, PCB layout, firmware for the CPLD and the firmware for the MCU. But you have to download by your own the firmware for the 49F010 on the internet.

Open source controller for Scalextric community. Scalextric Controller is composed by a custom hand controller, used to drive the Scalextric slots cars, and Android application used to communicate with the hand controller via Bluethoot low power (BLE). This project repository contains the PCB project, the micro embedded software, the Android App and the 3D CAD design of the cricital mechanical parts.

Currently Only MacOS is Present, PreAlpha means not Ready to use, Application is provided Without Strict Garantee, License not OSI. All others platform Windows, Linux, HaikuOS STILL under TEST, Dummy "Hello world" is provided instead Project2306 IDE : Application pour la programmation de Microcontroleurs et d' Application Electronique Project2306 IDE : for All whom want to Create and Develop on Embed Platform Software as Programming Tools suite and PCB Design Planned Features : Similar...

Electronics schematics, PCB images, firmware and documentation to create and deploy a network of ecology related sensors.

CAN Remote Automation and Control with the AVR Set of tool for Web based Home Automation over the CAN-Bus including firmware and PCB.

Home made device that supports PCB manufacturing

All design related files for a general purpose PCB, hosting a Microchip dsPIC33FJ256MC710 part. Includes gEDA schematic and layout files, BOM, etc... The card will include power regulation, SD memory card, in-circuit programming support, etc...

side4linux is a simple IDE intended for source code programming in C, G-code and AVR/ARM Assembler with an emphasis on developing manufacturing and embedded applications. It will be developed to include simulators, PCB software, compilers etc.

OpenVGA is an free and open FPGA-based implementation of a VGA compatible graphics adapter, and utilising low-cost hardware. The project includes the PCB schematic and artwork, Verilog HDL, firmware assembly code, and driver source code.

An utility which allows schematic capture, board layout and library files conversion from P-CAD to KiCad. --------------------- Old PCadToKiCad utility totally rewritten in C++ and integrated to KiCad itself. This old PCadToKiCad utility is no longer supported. Please, consider using pcad2kicad functionality inside of KiCad project (GOST branch): lp:~kicad-gost-committers/kicad/kicad (https://code.launchpad.net/~kicad-gost-committers/kicad/kicad) Note that lp:kicad branch contains only pcb...

This project is for converting PCB RS274X gerber files to RS274NGC Gcode files. Currently this software is in the early development stages. Currently working to simplify the program and improve reliability.

XML is one way to transfer a Printed Circuit Board (PCB) data base between Software Applications. This projects starts with an export from PCB123 and creates a Kicad brd file.

Project Fish is a start kit for those who want to have study with ARM/PCB/DDK/.Net. PF will start from a Digital thermometer, with the implement of Hard ware design, firmware, Windows driver and app, the participator will got understading in that fields.

ShortCut is a printed circuit board (PCB) design software. It is intended for people who develop small electronic devices and do not want to be annoyed by the PCB design process. ShortCut has some advanced functionalities.

This is a Computer Aided Electronic Design tool. It features schematic capture, simulation and PCB layout for both analog and numerical componants with the help of Gnome.

PCB plugin for rat selection. The user supplies a pin list via a text file. The plugin selects the rats which connects the listed pins. This functionality intends to help auto-routing with variable track width. See the web site for more detail.