Search Results for "frequency"
Sort By:
Showing 92 open source projects for "frequency"
View related business solutions-
Build Data Resilience - Take the Assessment TodayIs your recovery strategy as strong as you think? Take this quick self-assessment to check your recovery readiness and gain tailored insights. In only 2 minutes, you'll learn where you fall on the recovery readiness scale.
-
Train ML Models With SQL You Already KnowBuild and deploy ML models using familiar SQL. Automate data prep with built-in Gemini. Query 1 TB and store 10 GB free monthly.
-
1
AERIS-10
Open-source, low-cost 10.5 GHz PLFM phased array RADAR system
AERIS-10 appears to be a specialized signal processing and radar analysis project focused on pulse linear frequency modulation techniques, which are commonly used in modern radar systems for high-resolution detection and ranging. The project likely implements algorithms for generating, analyzing, and visualizing chirp-based radar signals, enabling experimentation with time-frequency characteristics and signal reconstruction. It is designed to support research or educational use in radar engineering, particularly in understanding how modulated pulses interact with targets and noise. ... -
2
Flipper Zero Unleashed Firmware
Flipper Zero Unleashed Firmware
Flipper Zero Unleashed Firmware. This software is for experimental purposes only and is not meant for any illegal activity/purposes. We do not condone illegal activity and strongly encourage keeping transmissions to legal/valid uses allowed by law. Also, this software is made without any support from Flipper Devices and is in no way related to the official devs. -
3
HackRF
Low cost software radio platform
This repository contains hardware designs and software for HackRF, a low-cost, open source Software Defined Radio platform. HackRF One from Great Scott Gadgets is a Software Defined Radio peripheral capable of transmission or reception of radio signals from 1 MHz to 6 GHz. Designed to enable test and development of modern and next-generation radio technologies, HackRF One is an open-source hardware platform that can be used as a USB peripheral or programmed for stand-alone operation. HackRF... -
4
Openwifi
open-source IEEE 802.11 WiFi baseband FPGA (chip) design
Linux mac80211 compatible full-stack IEEE802.11/Wi-Fi design based on SDR (Software Defined Radio). -
MongoDB Atlas runs apps anywhereMongoDB Atlas gives you the freedom to build and run modern applications anywhere—across AWS, Azure, and Google Cloud. With global availability in over 115 regions, Atlas lets you deploy close to your users, meet compliance needs, and scale with confidence across any geography.
-
5
CoreFreq
CPU monitoring and tuning software designed for the 64-bit processors
CoreFreq is a low-level CPU monitoring and tuning tool for 64-bit processors. It is designed to retrieve processor data with a high degree of precision and expose details that are often hidden from simpler monitoring utilities. The project supports a wide range of processor families, including Intel, AMD, Arm A64, RISC-V RV64, and PowerPC64 little-endian systems. It provides BIOS-like visibility into CPU behavior, including frequencies, ratios, topology, temperatures, power, and performance... -
6
channel3
ESP8266 Analog Broadcast Television Interface
Channel3 is an experimental ESP8266 project that generates analog television signals directly from a microcontroller GPIO pin. It uses the ESP8266 I2S peripheral at an 80 MHz bit rate and DMA buffers to synthesize radio-frequency waveforms. An antenna connected to the output can transmit a signal receivable by an analog television tuned to Channel 3. The implementation produces luma and color information through carefully constructed one-bit modulation patterns. Several demonstration screens show text, graphics, color swatches, lines, and simple 3D scenes. ... -
7
libvips
A fast image processing library with low memory needs
...Compared to similar libraries, libvips runs quickly and uses little memory. libvips is licensed under the LGPL 2.1+. It has around 300 operations covering arithmetic, histograms, convolution, morphological operations, frequency filtering, colour, resampling, statistics and others. It supports a large range of numeric types, from 8-bit int to 128-bit complex. Images can have any number of bands. It supports a good range of image formats, including JPEG, JPEG2000, JPEG-XL, TIFF, PNG, WebP, HEIC, AVIF, FITS, Matlab, OpenEXR, PDF, SVG, HDR, PPM / PGM / PFM, CSV, GIF, Analyze, NIfTI, DeepZoom, and OpenSlide. ... -
8
fldigi
Ham Radio Digital Modem Application
Fldigi is a modem program for most of the digital modes used by radio amateurs today: CW, PSK, MFSK, RTTY, Hell, DominoEX, Olivia, and Throb are all supported. It can help calibrate a sound card to a time signal and do frequency measurement tests. NOTICE: You must proceed to the Files section to locate the correct fldigi, flrig etal download for your particular operating system. Do not blithely use the big green Download button! Use the "Files" menu item or the "Browse All Files" link. -
9
SpectrumViewer for Windows
Continuous display of audio spectrum from PC input or wave file
Reads audio from Windows audio interface or wave file and creates a continuous spectrum display. Command line support for generating sine, square, triangle and sawtooth wave files. Uses biquad IIR digital filters for frequency detection, plus digital lowpass filters for output extraction. Highly configurable. 60+ FPS with suitable hardware. Manual or automatic gain control. -
Build Agents and Models on One PlatformGemini Enterprise Agent Platform is Google Cloud's comprehensive platform for developers to build, scale, govern, and optimize agents and models. Choose from Google's most advanced models and third-party models like Anthropic's Claude Model Family.
-
10
PerfectSineWaves
Perfect and bit-perfect PCM encoded sine wave audio test tones
In this project, a perfect PCM sine wave is one that contains a single frequency at 0 dBTP and no error harmonics at all. A bit-perfect PCM sine wave has error harmonics due to encoding quantization, but they are at the minimum level possible for the chosen encoding. The generated wave files hold a sequence of one or more complete copies of a repeating pattern. A file containing a single pattern can be played in a loop to extend the play time. -
11
UniversalMer
A CLI k-mer counting tool for multiple sizes of k at once.
UniversalMer is a k-mer counting tool for multiple size of k at once. It is available for DNA, RNA, and protein sequences. The program counts and summarizes the exact frequency of all k-mers from 1-mer to a user-defined maximum length (kmax). Analyzing the k-mer spectrum across multiple values of k can be done in seconds. This program is designed for bioinformatics researchers and scientists. -
12
Competent Audio
Machine graph audio engine for computer games
Competent Audio (CA) is an audio engine suitable for video games. It is written in C, but is designed for interoperability with other languages. Windows and Linux binaries for x86 and amd64 are available. CA uses a machine graph model with support for arbitrary numbers of machines, limited only by the available system resources: - Samplers play back audio clips. - Mixers combine audio signals and optionally perform signal processing. - Sinks send audio signals to an output... -
13
rt-analyzer
Linux real-time configuration analyzer with scoring and fixes
rt-analyzer reads /proc and /sys and applies 61 expert rules across 7 categories to produce a weighted 0–100 score for Linux real-time (PREEMPT_RT) systems, with prioritized, copy-pasteable remediation. It catches the failures that look fine but aren't: isolcpus set without nohz_full, C-state exit latency that silently bounds worst-case wakeup time, and effective_affinity quietly overriding the smp_affinity you requested. /proc/interrupts is sampled twice to separate interrupts merely... -
14
audioFlux
A library for audio and music analysis, feature extraction
...Can be used for deep learning, pattern recognition, signal processing, bioinformatics, statistics, finance, etc. audioflux is a deep learning tool library for audio and music analysis, feature extraction. It supports dozens of time-frequency analysis transformation methods and hundreds of corresponding time-domain and frequency-domain feature combinations. It can be provided to deep learning networks for training and is used to study various tasks in the audio field such as Classification, Separation, Music Information Retrieval(MIR) ASR, etc. -
15
TXM
Unicode XML TEI text analysis platform
...DOWNLOAD LATEST VERSION OF TXM : http://textometrie.ens-lyon.fr/spip.php?rubrique61&lang=en TXM offers a comprehensive range of analysis tools (concordances, collocate search, frequency lists, etc.) based on the powerfull CQP full text search engine (http://cwb.sourceforge.net) and a range of statistical functions (factorial analysis, classification, cooccurrency analysis, etc.) based on R packages (http://www.r-project.org). Read the scientific background at the Textométrie project web site http://textometrie.ens-lyon.fr/?... -
16
Chameleon-Mini
Versatile contactless smartcard emulator compliant to NFC
...It operates as both hardware and firmware, allowing researchers to interact with NFC systems at a low level, including reading tags, emulating card behavior, and capturing radio frequency communication. The device is widely used in security testing, penetration testing, and academic research focused on wireless communication protocols and authentication systems. It supports multiple card types and codecs, enabling it to replicate real-world access cards, payment systems, and identification tokens. One of its most powerful capabilities is its ability to log and sniff RF traffic, which allows detailed inspection of communication between readers and cards. ... -
17
pipZuseZ3
An emulator for the Zuse Z3 computer, invented in 1941
...It was the world's first working programmable, fully automatic digital computer. The Z3 was built with 2,600 relays, implementing a 22-bit word length that operated at a clock frequency of about 5–10 Hz. Program code was stored on punched film. Initial values were entered manually. -
18
OpenWireless project aims to provide fundamental framework for Open Wireless System Cloud (OWSC). The system will be based on the general purpose processors and clusters. The key modules of wireless communication system, such as timing and frequency synchronization, channel estimation, MIMO detection, modulation/demodulation, and channel coding/decoding will be also provided. Homepage: http://openwireless.sourceforge.net/
-
19
ECG Logger
ECG Logger is a complete Holter system incl. device and firmware.
NEW V3 version with RTC and buzzer (require V3+ ECG Logger Viewer application) The ECG Logger project is a Wearable Cardio Monitor for Long-Term (up to 24h) ECG Data Acquisition and Analysis (aka Holter) with an ECG live (real-time) mode. This project provides a very low-cost open-source "Hardware and Software" for a Cardiac Rhythmic Holter. The hardware has been made very simple and is based on an Arduino Nano micro-controller with boards for SD card mass-storage, instrumentation... -
20
A daemon that runs as tcp server and allows to change max, min, current frequency and select governor of each or all cpus.
-
21
wmc2d - coretemp/cpufreq monitor dockapp
shows cpu temperature and frequency in a 64x64 window
This is a small dockapp, which shows temperature and frequency from 2 upto 4 cores/CPUs and temperature of upto two thermal zones, which are normaly motherboard temperatures. It can also be used as example for howto write dockapp's with libxcb. -
22
motion5
Specialised variant of GRBL focused on motion of up to five axes
motion 5 is a specialised variant of GRBL which is focused on motion of up to five CNC axes and laser processing instead of milling. It supports ATMega MCUs running with up to 20 MHz and provides jitter-free pulses with a frequency of up to 38 kHz. Wherever usage and handling of motion5 is different to original GRBL, this is described in Wiki. For the G-code commands please note that motion5 supports more axes which are named "A" and "B". So a GRBL-command "G1X10.0Y20.0Z10.0" which moves its three axes would be e.g. "G1X10.0Y20.0Z10.0A20.0B30.0" in motion5 to move all five axes. -
23
OpenWAF
Web security protection system based on openresty
The first all-round open source Web security protection system, more protection than others. OpenWAF is the first fully open source Web application protection system (WAF), based on nginx_lua API analysis of HTTP request information. OpenWAF is composed of two functional engines: behavior analysis engine and rule engine. The rule engine mainly analyzes the individual requests, and the behavior analysis engine is mainly responsible for the tracking of the request information. Rule engine... -
24
pulseaudio-modules-bt
PulseAudio bluetooth modules
Adds Sony LDAC, aptX, aptX HD, AAC codecs (A2DP Audio) support to PulseAudio on Linux. This repo is a fork of PulseAudio Bluetooth modules. Added support for manual (expert) configuration for SBC codec parameters. You can use the parameters to override and fine-tune the default SBC codec config and manually setup configurations like SBC XQ, or Dual Channel HD mode. More info about SBC configuration options can be found at LineageOS documentation. Also, there is an interactive calculator and... -
25
SMakeWav - Command line WAV file creator
SMakeWav - create WAV file functions generator (sound), graph PS orTCL
Simple Make Wav is command line which allows to create a wav file with a sinusoidal or triangular or rectangular or personnal signal and to adjust voltage, frequency and cyclic ratio. And generate PS or TCL/TK file graphic image of the WAV form, too Usage : ./smakewav [options] -o file.wav Examples : ./smakewav -o example.wav ./smakewav -o example.wav -f 440 -d 10 -t sin ./smakewav -o example.wav -f 1000 -d 10 -l 1 -t rec -cr 20 -ps example.ps -nps 2 -wps 10 -sps 0.5 -bgps FFFFFF -aps FF0000 ....
