Search Results for "easy cnc controller"
Sort By:
Showing 19 open source projects for "easy cnc controller"
View related business solutions-
Build Agents and Models on One PlatformGemini Enterprise Agent Platform is Google Cloud's comprehensive platform for developers to build, scale, govern, and optimize agents and models. Choose from Google's most advanced models and third-party models like Anthropic's Claude Model Family.
-
Build Data Resilience - Take the Assessment TodayIs your recovery strategy as strong as you think? Take this quick self-assessment to check your recovery readiness and gain tailored insights. In only 2 minutes, you'll learn where you fall on the recovery readiness scale.
-
1
mpv
Command line video player
...Hardware decoding can be enabled at runtime on demand. A straightforward C API was designed from the ground up to make mpv usable as a library and facilitate easy integration into other applications. mpv is under active development, focusing on code refactoring and cleanups. -
2
Betaflight
Open Source Flight Controller Firmware
Betaflight is flight controller software (firmware) used to fly multi-rotor craft and fixed wing craft. This fork differs from Baseflight and Cleanflight in that it focuses on flight performance, leading-edge feature additions, and wide target support. Betaflight supports a wide range of flight controllers with at least an STM32F4 MCU. You can use nearly any piece of modern hardware out there. -
3
Dummy-Robot
My super mini robotic arm robot project
...The repository contains full hardware design files, firmware, control software, and 3D models. It includes components such as a gripper, LED light ring PCB, wireless spatial positioning controller, and a portable case. The project demonstrates advanced engineering with stepper motor drivers, custom controllers, and debugging tools. While the original version is CNC-machined, a simplified 3D-printable "youth edition" is planned to lower costs. This project serves as both an educational resource and a demonstration of innovative DIY robotics. -
4
ECG Logger
ECG Logger is a complete Holter system incl. device and firmware.
NEW V3 version with RTC and buzzer (require V3+ ECG Logger Viewer application) The ECG Logger project is a Wearable Cardio Monitor for Long-Term (up to 24h) ECG Data Acquisition and Analysis (aka Holter) with an ECG live (real-time) mode. This project provides a very low-cost open-source "Hardware and Software" for a Cardiac Rhythmic Holter. The hardware has been made very simple and is based on an Arduino Nano micro-controller with boards for SD card mass-storage, instrumentation... -
MongoDB Atlas runs apps anywhereMongoDB Atlas gives you the freedom to build and run modern applications anywhere—across AWS, Azure, and Google Cloud. With global availability in over 115 regions, Atlas lets you deploy close to your users, meet compliance needs, and scale with confidence across any geography.
-
5
pyrpl
PyRPL turns your Red Pitaya into a powerful analog feedback device.
...The graphical user interface (GUI) provides a realtime display of the various measurement instruments and allows the easy configuration of DSP signal chains and feedback controllers. At the highest abstraction level, arbitrary feedback sequences can be defined to fulfill tasks as complex as approaching and locking a resonance of a high-finesse Fabry-Perot cavity (tested up to finesse=100,000). -
6
MVProc
MVC web platform for Apache and MySQL Stored Procedures
MVProc is a Model-View-Controller module for Apache2 that facilitates using MySQL stored procedures as the controller element. NOTE: Version 2.1 is STABLE and currently in production use. NOTE: Versions 1.4+ are for Apache2.4 - in order to run on Apache2.2, replace request_rec->useragent_ip references with request_rec->connection->remote_ip (there are 3 in the source code) -
7
IrrigationController
Smart Home Irrigation System
The project contains the following modules: * Main Controller Module which is responsible for scheduling and switching the water pumps, monitoring the water level and temperature, and reading the Soil Moisture Sensors. The module has a 4 line alphanumeric LCD that makes the system easy to use. * Sensor Controller Module is attached to the Main Controller Module via RS232 interface. This module is the master controller for the Soil Moisture Sensors and also contains a Dallas 1-Wire interface for temperature sensors... -
8
Tardyon Drive AVR Stepper Controller
AVR-based single axis stepper motor controller
This project provides an AVR-based, USB accessible, single-axis motion controller that can fit into an USB-connector completely and therefore is probably the worlds smallest stepper motor controller. Here both, hardware schematics and all software components are provided. -
9
Open Source DCS (Distributed Control System). FreeDCS will give you everything you need to control your machines or process. It's being designed to be easy to use and deploy. It's composed of Logic designer, HMI designer and controller software.
-
$300 Free Credits to Build on Google CloudPut your $300 in credit toward real workloads, then keep building with free monthly usage for 20+ products. No commitment and no charge until you upgrade.
-
10
OCP - Open Controller Platform is software platform that makes it easy to build a cross-compilation toolchain with C compiler, assembler, emulator and programming tools for embedded micro corntroller systems.
-
11
avr-libethernet
Ethernet stack implementation (currently based on the ENC28J60)
A callback handler based ethernet stack implementation optimized for AVR microcontrollers. For now, the only controller supported is the ENC28J60. However it is easy to integrate different controllers as the interface your driver has to provide is fairly simple. Developed by the hobbyist programmers and electrical engineering students Niklas Fritz and Alexander Gladis -
12
StyroFoamRobot
Cuts 3D objects from polystyrene foam (EPS/XPS)
A robotic DIY styrofoam cutter consisting of one rotational and two translational axes. It cuts a variety of shapes out of styrofoam-like materials using a hot wire. This project documents the necessary hardware and software parts. Don't miss the follow-up project at http://raumschaum.org Its goal is to further develop hardware and software into an user friendly application. -
13
AVRCNC is a CNC-Controller based on an ATMega8 and some other (cheap) hardware. Main advantages compared to L297+L298 are: - simpler to build - easier to expand - mega8 controlls motors directly - no time-critical tasks on PC
-
14
piCNC is a PIC based stepper motor controller for use in CNC applications. Its software and hardware development is completely open source and community supported.
-
15
The system allows running and controlling the MAC controller on the Xilinx board with Virtex. This way the project provides a set of features and functionality to easy build the application and eCos and TCP/IP FreeBSD with access to Xilinx MAC controller
-
16
OSX-AVR is a project to bring together the open source tool chain for the AVR micro-controller family into one easy to install package (for apple computers). This is an OS X version of the windows orientated WinAVR project (winavr.sf.net). PPC & Intel
-
17
Intend to reproduce most of the conversational programming functionality of the Fagor 8055TC lathe controller. Web browser interface for easy portability between different OS. Visit project web-site for demo.
-
18
Project aim is to translate RS274X files such that it is easy to use the RS274X file content to automaticly program a home made CNC milling machine to mill Printed circuit boards.
-
19
RTiC-Lab is a semi-detached, open source software designed to run on both Linux and RTLinux. It is an easy to use controls prototyping tool for hard real time applications. Users get real time access to controller parameters and data through a GUI.
- Previous
- You're on page 1
- Next
