Take advantage of Open Source Load Balancer to elevate your business security and IT infrastructure with a custom ADC Solution.
Boost application security and continuity with SKUDONET ADC, our Open Source Load Balancer, that maximizes IT infrastructure flexibility. Additionally, save up to $470 K per incident with AI and SKUDONET solutions, further enhancing your organization’s risk management and cost-efficiency strategies.
Your company’s all-in-one solution for trusted information
Cut through the noise and end information overload with Guru, an all-in-one wiki, intranet, and knowledge base that serves as your company's single source of truth.
Control software for GEMBIRD USB controlled power strips
sispmctl is an application enabling the use of the GEMBIRD SiS-PM and mSiS(sispm) USB-controlled power-outlet device under Linux. Note that the device is also sold under different Names, i.e. as "IntelliPlug" in Germany.
Software não oficial para controle de nobreak APC do Brasil
O nome do projeto no sourceforge.net era apcupsd-brazil e mudou para apcctrl.
Caso seu nobreak não seja da APC Brasil (como os modelos importados) utilize o projeto http://www.apcupsd.org/
Esse projeto não é oficial da APC Brasil. É uma solução independente e de código aberto.
Não deixe de ler a wiki do projeto. É fundamental para compilar e ter acesso a outras orientações.
Modelos suportados:
1) BACK-UPS BR 1200VA (BZ1200BI-BR e BZ1200-BR) *modelos com USB
2) BACK-UPS BR...
Cpuspeedy is simple and easy to use program which allows you to change the clock speed and voltage of the CPUs on the fly, using the Linux's CPUFreq driver.
Use it and you should save battery consumption and reduce the temperature of your laptop.
Apcupsd is a program for monitoring UPSes and performing a graceful computer shutdown in the event of a power failure. It runs on Linux, Mac OS/X, Win32, BSD, Solaris, and other OSes.
BackBox seamlessly integrates with network monitoring and NetOps platforms and automates configuration backups, restores, and change detection. BackBox also provides before and after config diffs for change management, and automated remediation of discovered network security issues.
powerkit is an lightweight desktop independent full featured power manager, originally created for Slackware (but will work on any Linux/FreeBSD distro) for use with alternative desktop environments and window managers, like Fluxbox, Blackbox, FVWM, WindowMaker, Openbox, Lumina and others.
This is a small program that reads and writes the WakeUp time in the BIOS.
This is done via /dev/nvram on recent kernels (>2.4.6, including 2.6.x) or, alternatively, via direct ISA access.
On this WakeUp time the computer is powered on automatically.
gapcmon is a gtk/glib desktop monitor program for the apcupsd package. apcupsd interfaces with UPS power systems on local or networked systems. gapcmon connects to apcupsd via the NIS api to collect and displays the current operational state of the U
gpmudmon is a battery monitor for Linux PPC similar to Batmon but running as a Gnome applet. It displays the current charge of the battery and whether your Powerbook is connected to the power supply or not. It also has an optional gauge to show the curren
PRTG Network Monitor is an all-inclusive monitoring software solution developed by Paessler. Equipped with an easy-to-use, intuitive interface with a cutting-edge monitoring engine, PRTG Network Monitor optimizes connections and workloads as well as reduces operational costs by avoiding outages while saving time and controlling service level agreements (SLAs). The solution is packed with specialized monitoring features that include flexible alerting, cluster failover solution, distributed monitoring, in-depth reporting, maps and dashboards, and more.
tcron integrates 'cron/at' with ATX power-up capability. It can invoke
multiple cron/at jobs with power-up/shutdown a day. You can use it to:
1. Power up to play muisc/sound and shutdown (super alarm).
2. Record TV/Radio programs
DPM explores technologies to improve power management, with a focus on techniques applicable to running systems, adjusting power parameters on-the-fly in order to
save power during brief idle periods or execution of tasks
with lower power demands.
Genpower is a daemon that monitors the state of an uninterrupted power
supply device (UPS) through an RS232 serial interface, and takes action
according to the state of the UPS.
A variety of device and cables are supported.
An opensource replacement for the Commander Pro software available for download from http://www.ups-software-download.com This works with the no-name UPS available from Dick Smith in Australia, and probably others that use this software As of 12-12-2008,
Enables the possibility of suspending a machine to disk under Linux. It does not need either APM or ACPI support. Software suspend creates an image which is saved in swap partition(s) or a regular file. At the next boot, the kernel detects the saved imag
Power acpid is an acpi (Advanced Configuration and Power Interface) daemon designed to be more functional and improve on the design of the current acpid. Power acpid is very loosely based on work from acpid.sourceforge.net.
A UPS monitor daemon for the CyberPower 320 SL UPS which allows you to specify any serial port to watch or any shutdown script you would like to occur. It is very compact and easily used.
Colection of tools to monitor and manage a Socomec/Sicon Ofys UPS connected to the computer through a serial cable.
At the moment, only a command line utility has been written.
MyApm is a simple applet displayed in the KDE-Kicker panel showing battery time remaining of an APM supported-laptop. Settings like energylevels, warnsnd and -msg are configable. It uses the remaining min of /proc/apm instead of the "%" like other apmds
Conext Battery Backup UPS power daemon.
cpowerd monitors power status of the Conext UPS.
It can detect a power failure and shutdown the system safely or cancel shutdown when power is restored. Low battery alarm is not implemented yet.
A simple yet powerful Power Daemon (powerd) to monitor an Uninteruptable Power Supply (UPS) with the additional capabilities of notifying remote hosts that may not have a way of knowing if their power is off.
A power daemon modified to work with the "BlackOut Buster" made by PK Electronics. The program itself is very stable, thanks mostly to bpowerd by Chris Craig, from which it was derived. It now needs to be repackaged and the install process cleaned up.
bpowerd is a program to monitor Best Power Patriot and Patriot Plus UPSs under Linux. It uses init to inform the system of a power outage and is capable of detecting power fail and low battery conditions. It is also capable of killing the inverter on shut