Search Results for "extension"

Javier Gutiérrez Chamorro (Guti) Open source projects Author's website: https://www.javiergutierrezchamorro.com

pFFh is a programming language that allows you to launch applications on embedded systems safely, quickly and comfortably. pFFh runs on the target system, combining operation as a command interpreter and code compiler. We can say that pFFh behaves like an operating system on the board under development. All pFFh needs is a serial or USB-serial channel to communicate, and through it, receive and process console commands, either from a keyboard or from files sent from a desktop computer. At...

CP/M Plus on ZX Spectrum +3 has ability to load device drivers from normal disk files (with .fid extension) on boot. A Spectranet device brings networking abilities to the Spectrum computers. This driver allows connection to a remote disk image registered as N: and a remote character device (e.g. serial console) registered as SPCNET: (namely, one can type `DEVICE aux:=spcnet` to redirect AUX: to SPCNET: and use it as a serial port over ethernet). Proven to work on the real thing...

CP/M Plus on ZX Spectrum +3 has ability to load device drivers from normal disk files (with .fid extension) on boot. A Spectranet device (apart from being networking interface) contains 128kB of extra RAM that can be accessed even with the Spectranet firmware disabled. This project proposes a FID driver that exposes Spectranet's extra memory as a ramdisk to the CP/M Plus system. Changes in v1.1: keep floppy drive motor state (as set by CP/M) when paging in Spectranet RAM (to avoid motor jumps...

CP/M Plus on ZX Spectrum +3 has ability to load device drivers from normal disk files (with .fid extension) on boot. One of the most important devices for any disk operating system is the mass storage drive. Although ZXMMC device is available on the market for years and it works well with +3e firmware, partitions created on MMC cards could not be accessed from CP/M world. At some point it became so frustrating, I decided to write FID driver for it. It's not perfect, but it works surprisingly...

... are an two MCP23017 as I2C-Bus expanders.The MCU is an ATmega88 in a small housing. I decided me to use I2C-Bus Expanders instead using an ATmega 1284p and direct I/O handling in the expanding capability of this concept. If i need more I/O or and ADC, RTC, Temp-Sensor or ever, i need just 3 Lines to join the hardware extension to the bus.

libmng -THE reference library for reading, displaying, writing and examining Multiple-Image Network Graphics. MNG is the animation extension to the popular PNG image-format.

This page on Sourceforge is now officially outdated (by almost 2 years). Please click the link in the blue box above, or visit http://sites.google.com/site/arcrascent/. Thank you. Joonyoung Lee

This project is about a light controlling system with a 4 RGB-LED channels to run different modes: • autonomously w/o PC performing HSI2RGB transformations and running through the color hues (with dimmable brightness) • remote operated by PC or embedded user software using the provided C++ Software library (based on Boost libraries) • ideal platform for color experiments with your RaspberryPi The system consists of 4 layers: • PCB with Atmel ATmega16 and FT232RL USB interface (Eagle...

GRUB for DOS is the dos extension of GRUB. It enables dos users to run the configuration console directly in real mode. The project also contains an utility called WINGRUB, an GUI intends to help configuring and installing GRUB in the WINDOWS environment

B-News Plus is the ultimate extension to B-News. It is a binaries poster/downloader for usenet. Key new features are: support for yEnc, timed download-upload, auto resume after errors, CRC checking, repairing of post...

OxygenOS is an Object-Oriented Operating System built on top of an L4 Microkernel. Oxygen uses a revolutionary new File System, or rather, an Object System that uses the HardDrive as an extension of the Memory.

This project aims to provide an eclipse 3.0 extension to support z80 development for ti calculators and maybe more platforms in the future.

OpenPalm is aimed at providing a Palm API compatible GUI system for small embedded devices. Not anymore a propritary OS can limit our imagination; not anymore a slow processor can limit our extension. Let's help fulfill these simple requirements.