Search Results for "enigma 2 firmware"
Sort By:
Showing 90 open source projects for "enigma 2 firmware"
View related business solutions-
Secure remote access solution to your private network, in the cloud or on-prem.OpenVPN is here to bring simple, flexible, and cost-effective secure remote access to companies of all sizes, regardless of where their resources are located.
-
Top-Rated Free CRM SoftwareHubSpot is an AI-powered customer platform with all the software, integrations, and resources you need to connect your marketing, sales, and customer service. HubSpot's connected platform enables you to grow your business faster by focusing on what matters most: your customers.
-
1
Luma3DS
Noob-proof (N)3DS Custom Firmware
Luma3DS is a program to patch the system software of (New) Nintendo (2)3DS handheld consoles "on the fly", adding features such as per-game language settings, debugging capabilities for developers, and removing restrictions enforced by Nintendo such as the region lock. It also allows you to run unauthorized ("homebrew") content by removing signature checks. To use it, you will need a console capable of running homebrew software on the Arm9 processor. Since v8.0, Luma3DS has its own in-game menu... -
2
ESP3D
FW for ESP8266/ESP8285/ESP32 used with 3D printer
This firmware allows not only to have a cheap bridge between Wifi and serial, but also to have a web UI to configure wifi, to monitor 3D printer and even control it, and to make things easy, UI is fully customizable without reflashing FW. Firmware should work with any 3D printer firmware (repetier/marlin/smoothie ware using GCODE) if the serial connection has a correct setup. I currently use it with my personal flavor of repetier for Due based boards. The web interface files are present... -
3
EDK II Project
EDK II
A modern, feature-rich, cross-platform firmware development environment for the UEFI and PI specifications. EDK II is a modern, feature-rich, cross-platform firmware development environment for the UEFI and PI specifications. EDK II is open source, using a BSD+Patent. Stable tags are created from edk2/master based on validation with various platforms. Stable tags names use the format edk2-stable<4 digit year><2 digit month> and occur roughly every three months (starting from August 2018). UEFI... -
4
Open Source Cartridge Reader
A shield for the Arduino Mega that can back up video game cartridges
This project represents a community-driven effort to provide an easy-to-build and easy-to-modify cartridge dumper. Completely stand-alone, does not need a PC to operate (unless for updating firmware). Easy to modify open-source code, write your own extensions and share them with others. Portable thanks to a battery. Modular design using mostly off-the-shelf components. Reads NES, Famicom and Family Basic cartridges including save. Supports Mapper 30/NESmaker and flashes INL NM30 boards. Reads... -
Bright Data - All in One Platform for Proxies and Web ScrapingBright Data offers the highest quality proxies with automated session management, IP rotation, and advanced web unlocking technology. Enjoy reliable, fast performance with easy integration, a user-friendly dashboard, and enterprise-grade scaling. Powered by ethically-sourced residential IPs for seamless web scraping.
-
5
rEFInd
An EFI boot manager utility
rEFInd is a fork of the rEFIt boot manager. Like rEFIt, rEFInd can auto-detect your installed EFI boot loaders and it presents a pretty GUI menu of boot options. rEFInd goes beyond rEFIt in that rEFInd better handles systems with many boot loaders, gives better control over the boot loader search process, and provides the ability for users to define their own boot loader entries. -
6
*Until you install the operating system, the default user = live / no password. DragonOS FocalX (22.04) and DragonOS Focal (20.04) are out-of-the-box Lubuntu based x86_64 operating systems for anyone interested in software defined radios. All source installed software is located in the /usr/src directory while the remaining software was installed by package managers. What is DragonOS and why do you want it? The shortest distance between two points is a straight line. DragonOS...
-
7
Windows Install
Installing Windows from macOS. Suitable for Hackintosh and Macintosh
Installing Windows from macOS. Suitable for Hackintosh and Macintosh (install drivers yourself). Possibility to make a backup. There is no need to create an installation flash drive. The utilities used are wimlib and ntfs-3g and others. Disk access must be granted (shown in the screenshot) There is a drag and drop support function. Compatible with Mac OS X 10.13 and up. The user must be an administrator and the password must be from the administrator. Intel only! Training video -... -
8
ESP32-S2-Mini
Arduino ESP32-S2-Mini v1.00 Wemos | Firmware PS4 900x HOST Wifi AP
... General en Conexión WIFI marcar la casilla INICIAR WIFI: y conectar a su wifi local para poder administrar desde una PC, Así podrá subir archivos, borrarlos y Actualizar el Firmware de la placa Nota Importante 2: La herramienta Web https://xdevgms.github.io/ solo la necesita cuando su placa ESP32-S2 este vacía, es decir, sin ningún firmware, luego que cargue este firmware, no volverá a necesitarla y para actualizar solo requerirá descargar la última versión fwupdate_webkey.bin Información -
9
myFP2ESP32 WiFi ASCOM Focus Controller
ASCOM-INDI ESP32 Wifi focuser
A WiFi focuser based on ESP32 WiFi. DRV8825, ULN2003, L298N, L293DMINI , L9110S, TMC2225, TMC2209. Support for ASCOM, ALPACA, INDI, Linux, Webserver, JSON, TCP/IP, Android. (c) Robert Brown 2014-2024, Holger M, 2019-2021. All rights reserved. Code or portions of code may not be copied or used without appropriate credit given to author. EXPANSION BOARDS -Expand this project using two types of project expansion boards at https://sourceforge.net/projects/myesp-boards/ Spreadsheet... -
The #1 Embedded Analytics Solution for SaaS Teams.Qrvey’s comprehensive embedded analytics software enables you to design more customizable analytics experiences for your end users.
-
10
Metztli Reiser4
Reiser4 SFRN 4.0.2 /Zstd Debian Bookworm minimal install media ISO/USB
Modified Debian minimal netboot installation ISO image suitable to be 'burned' onto ~220 MB CD|USB media with command (assuming USB device is at /dev/sdc *else* modify or you risk data loss) at Linux shell: dd if=metztli-reiser4.iso of=/dev/sdc bs=4M; sync Enables native reiser4 create/partition/format of storage media during Debian OS installation--accomplished via Internet. Guided non-expert install defaults to 500MB /boot JFS & reiser4 non-LVM others. Expert requires 0.5 to 1... -
11
ppgwavecass
ppgwavecass: tools for the PPG Wave 2/2.2/2.3 data cassette format
...-file export) Special features: Can convert wav-files (data cassette signals) from/to bin-files and syx-files. Additional folder: "Firmware Patches" Copyright (C) 2022-2023 by Klaus Michael Indlekofer. All rights reserved. Note: Special restrictions apply. See disclaimers below and within the distribution. (We are not affiliated in any way with companies/persons mentioned on this page. All brand names and trademarks are property of their respective owners.) -
12
QtPALS
Qt software for positron lifetime measurement
PALS software using DRS4 EVM board (http://www.psi.ch/drs/evaluation-board) to determine time between two pulses. Time distance is then send to histogram and evaluated in odher programs likes LT or PALSFit. 2, 3 or 4 detector PALS setup. DRS4 inputs: Ch1 - Start detector 1274keV, Ch2 - 511keV stop detector1, Ch3 511keV - stop detector 2, Ch4 - external trigger input - after FPGA firmware no external trigger needed. -
13
megawake
Remotely turn on devices connected to your home network
... to: 1-Connect to the same network as the device you want to wake. 2-Enable Wake on Lan (WoL) feature on the device you want to wake. 3-Make sure the device is turned off or in sleep state. System requirements for WoL: 1-Smart TV must be manufactured in 2012 or newer. 2-Windows PC must be Windows 95 or newer. 3-Wake on Lan supported BIOS (Firmware) -
14
MSX++ Official Firmware for the following machines. 1st Gen => 1chipMSX, Zemmix Neo (KR), Zemmix Neo BR, SX-1 and SX-1 Mini/Mini+. 2nd Gen => SM-X and SX-2.
-
15
eCxx
A C++ library for AVR and NodeMCU
NOTE: This project is marked with 'Status: Abandoned' on SourceForge because not enough time can be dedicated to this project. However it may still get sporadic commits to the repository. eCxx is a library for AVR and NodeMCU tailored for micro LED displays and lighting effects. eCxx is utilizing Makefile build system. Java and Python based applications/tools are also included to ease the development and debugging process using the host PC. On one side, eCxx supports the original... -
16
Metztli Reiser5
Metztli Reiser4 Software Framework Release Number(SFRN) 5.1.3 unstable
'There is no reiser5', said the main reiser4 maintainer/developer; yet, he announced his new project as 'reiser5' ;-) Unstable snapshot of new Metztli Reiser4, Software Framework Release Number (SFRN) 5.1.3, minimal Debian Installer (d-i) for AMD64. Netboot ISO Image may be 'burned' to USB stick with command (assuming USB device is at /dev/sdb) *else* modify or you risk data loss: dd if=metztli-reiser4-sfrn5.iso of=/dev/sdb bs=4M; sync and/or for AMD Epyc/Ryzen CPUs dd... -
17
ECG Logger Viewer
ECG Logger Viewer is the application software for ECG Logger device.
NEW VERSION 3.2.1.5 - MARS 2022 ECG Logger is a Wearable Cardio Monitor for Long-Term (up to 24h) ECG Data Acquisition and Analysis (aka Holter) with an ECG live (real-time) mode. The ECG Logger project is aimed for providing a very low-cost open-source "Hardware and Software" for a Cardiac Rhythmic Holter. The hardware has been made very simple and is based on an Arduino Nano micro-controller with two companion boards for the SD card mass-storage and the instrumentation differential... -
18
LineageOS for x2
LineageOS for LeEco Le Max 2
LineageOS is a custom build of Android based on AOSP. This SourceForge project is dedicated to supporting the LeEco Le Max 2 and all variants (x820, x821, x822 x829). This project also contains some mods and tweaks and the necessary firmware files. -
19
IoT Leaf
Software resources for the ESP32 based IoT Leaf microcontroller board
.... Both together provide a powerful hardware which can be used in many different scenarios. Details and the full specification are available at https://iot.halaser.de This repository contains different firmware-examples and applications which can be used together with this board as well as hardware designs which are free to be used. -
20
FUI Audio DAC
FPGA-Based USB-Input Audio Digital to Analogue Converter
An open-hardware and -firmware project that implements a USB-input fully-digital class-D audio amplifier. All processing is done on FPGA, including the USB-physical, USB-SIE, HID interface, clock-recovery, bus voltage regulation, noise-shaping and PWM output. A Microchip PIC based remote control is also included. The remote maps to the media buttons of the USB HID interface. The volume control, next track, previous track, stop and play/pause functions are supported. -
21
PICKit3V3_PCAR
Microchip PICKit scriptable
The PICkit 3 Programmer Application with scripting support is a modified version of the PICkit 2 programmer application that was specially modified to work with PICkit 3 scripting firmware. This is a modified .NET DLL which permit low level access to your Michrochip PicKit probe. Write your own programs for your PICKit. -
22
ElectronZ80 is an operating system for AK1025(ATJ2091) mp4 family players. It was designed for users who can not any more use their original firmware. It is dedicated to electrical engineers and programmers, but can be used by any one...
-
23
dotOS 2.x - O
dotOS 2.x a Fast, Unique and Beautiful rom based on android oreo
Droid On Time OS - dotOS dotOS is a Custom Android Firmware based on Android Open Source Project . It is made in a way to look great in terms of the UI and also in term of performance in order to unleash the device's true potential. -
24
openCONFIGURATOR Eclipse Plugin
An eclipse plugin for the openCONFIGURATOR configuration tool
... core library enabling the creation and configuration of a POWERLINK network (http://www.ethernet-powerlink.org/) in the Eclipse IDE (https://www.eclipse.org). Step-by-step video tutorials: Part 1 - Setup - https://goo.gl/l7eTrC Part 2 - RMN configuration - https://goo.gl/hHY12A Part 3 - PDO mapping - https://goo.gl/8gsRPq Part 4 - Parameter configuration - https://goo.gl/Xjuqjz Part 5 - Modular CN - https://goo.gl/PGCgCk Part 6 - Firmware Handling - https://goo.gl/yBn7ph -
25
iwattnick
iWattnick: the ultimate e-bike computer
... throttle input. The project includes: The hardware (schematics & drawings) The firmware (microcontroller program) The software (for mobile phones and PC) Project developement is being tracked (in Russian) here: http://electrotransport.ru/ussr/index.php?topic=24226.0