Thorsten Wagner

backport for Ubuntu 22.04

Dear Takayuki-san. Do you get any warning about a firmware mismatch when starting gxsm? You certainly have installed the latest gxsm3 but what about the controller? Is it up to date? You can do a self check of the controller with the windows tools supplied from softdb. Did you ever have voltages larger than 10 V at one of the inputs? In this case, you have a chance that the DSP or FPGA are damaged ... Thorsten :-)

Hi Takayuki-san. Did it start once until you set up the hardware? Usually after a kernel update, you should run once sudo dpkg-reconfigure sranger-modules-mk23-dkms to prepare the kernel module for the freshly installed kernel. If you start gxsm3 with the prefix sudo it runs from another configuration, most possible without hardware support. You can also try gxsm3 --hardware=no which should start gxsm3 but the hwi (hardware interface) is not loaded. You can check whether the kernel module is loaded...

Hi Yoichi. Please check if you have installed all dependencies (includind build-debendencies) listed in the file https://github.com/pyzahl/Gxsm3/blob/master/debian/control_ubuntu22.04 If you have to install additional libraries, do not forget to "reconfigure" your makefile. In GXSM3 ./autogen.sh should do the job. Thorsten :-)

I hope you are not talking about the README in the root folder. Please have a look at the more helpful README.md in the subfolder of the MK2/3: https://svn.code.sf.net/p/sranger/svn/trunk/SRanger/SR_MK2_MK3Pro/kernel-module/src/README.md Thorsten :-)

Hi Shiang-Bin Chiu. Which instructions did you follow? If you have installed from launchpad - see posting above - also the sranger packages should be installed. Please check by running sudo lsmod | grep usb If not you have do decide whether you use dkms or you do everything manually. On what linux derivate do you try to install GXSM? The launchpad works mostly for Ubuntu - up to the most recent one. Thorsten :-)

HI Mujeeb. I guess the problem is that you did not enable the respective repositories after installing your Ubuntu. Please run in a terminal the following commands: sudo add-apt-repository universe sudo add-apt-repository multiverse sudo add-apt-repository restricted sudo add-apt-repository ppa:totto/gxsm sudo apt update sudo apt install gxsm3 Thorsten :-)

Update for ubuntu24.04