Be the first to post a text review of Kwlan. Rate and review a project by clicking thumbs up or thumbs down in the right column.

• kwlan 0.6.3 file released: kwlan-0.6.3.tar.bz2

  Version 0.6.3: ------------- - Fixed Bug: Setting to show New Interface Wizard was not stored correctly. - Fixed Bug: Adding new network from Scanning didn't fill in encryption settings automatically - Fixed Bug: WPA enabled networks were shown as new if wpa_supplicant was not started - Fixed Bug: access to pppd was not tested correctly - Access Dialup networks from context menu of interface systray icon. Version 0.6.2 ------------- - Added option for ad-hoc networks - Added option to show commands in kdesu password requests - Shows signal strength in context menu - Shows unconfigured networks in context menu to automatically add them Version 0.6.1 ------------- - Kwlan main icon is only shown if no interface is monitored - Support for hidden SSIDS - ap_scan value for wpa_supplicant configurable - Only available profiles can be shown in profile selection context menu Version 0.6.0 ------------- - Use kdesu instead of su / sudo Version 0.5.9 ------------- - Fixed Bug: Disable interface did not work - dhcp client is not startet each time connection was lost - Added more granular state to interface tooltip Version 0.5.8 ------------- - Added broadcom and bsd drivers to wpa_supplicant - Added options to configure phase1 and phase2 options - Added option to prevent interfaces from being configured by Kwlan - Added option to configure custom wpa_supplicant config file Version 0.5.7 ------------- - Use only /sys/class for interface detection and statistics instead of ifconfig - start pppd in user mode instead of root mode (requires user to be in dialup group, respects linux group access rights) - Added warning if user is not in dialup group - Added documentation (at least started it...) Version 0.5.6 ------------- - Fixed Bug: Storage of encrypted networks did not work correctly Version 0.5.5 ------------- - Fixed Bug: Last Profile was not selected on startup of wpa_supplicant - Fixed Bug: KWlan tried to get an ip address on startup even if interface already had one - Fixed bug: Typo in creation of ISDN dialup networks - Fixed bug: Analog networks were not stored correcty - Added "New Interface found" wizard - Disabled encryption configuration if wpa_supplicant is not started - Tooltip for wireless interface does not show rows for data that is unavailable (like link quality or signal level, which is not shown or all network cards) - Added support for modem init string Version 0.5.4 ------------- - Dialup connections can be use without storing passwords (so One-Time-Passwords can be used) - /sys/class/net and ioctl calls are used for interface statistics to avoid ifconfig calls - interface icon shows transmit / receive status (thanks to code from knetstats) Version 0.5.3 ------------- - updated to automake 1.9 - Tooltip shows radio off for wireless interfaces that have the radio switched off - Warning messages will be generated if sudo / su is not found - More granular display of connection strength - Fixed Bug: No interfaces found if ifconfig isn't in the user's path - Fixed Bug: Menu for Settings dialog was missing Version 0.5.2 ------------- - Re-integrated interface profile configuration into the main window - Tooltips redisigned (thanks to Laurens Vanhove) Version 0.5.1 ------------- - added option to start a script before disconnect and after connect (for example to automatically start vpn connections). - added --debug parameter for debug output - changed icons Version 0.5.0 ------------- - One traywindow for the application to avoid kwlan beinig invisible if no interface is found - interfaces can be excluded from being shown in systray - Dynamic check for new interfaces Version 0.4.9 ------------- - Basic support for dialup networks - connections can be created and stored in /etc/ppp/peers/kwlan - Todo: allow detailed configuration of dialup connections like fixed ip address Version 0.4.8 ------------- - Fixed Bug: Multiple password requests on startup Version 0.4.7 ------------- - Use wpa_supplicant for scanning if started, else use iwlist Version 0.4.6 ------------- - Use one configuration file per interface to avoid mixup of profiles between interfaces - Use iwlist for network scanning Version 0.4.5 ------------- - Added basic support for unencryped networks - Added basic support for wired interfaces - Use a different wpa_supplicant config file per interface located in the user's kde config directory Version 0.4.4 ------------- - Fixed Bug: Driver is not remebered when wpa_supplicant is started at kwlan startup instead of file->start wpa_supplicant menu - Added open / shared authorisation to wep setting Version 0.4.3 ------------- - Improved support for multiple wireless cards (one systray window per card) - TODO: Make kwlan aware of insertion / removal of interface (currently interfaces are enumerated at startup) - Driver is remembered per interface Version 0.4.2 ------------- - Added basic support for multiple wireless card (only one cards's status is shown in systray) Version 0.4.1 ------------- - Event History window scrolls down automatically on new events - Changed Layout of IP settings dialog - Added checkbox to not override existing IP / DNS settings - fixed problem with dhcpd when using fixed IP addresses (symlink /etc/resolv.conf was overwritten) Version 0.4.0 ------------- - kwlan can be started as normal user, kdesud / kwlansuprocess is used to configure interface or start wpa_supplicant (thanks to Valentine Sinitsyn <Valentine.Sinitsyn@usu.ru>) - uses KMessagBox instead of QMessagebox - checks for existance of wpa_supplicant / dhclient / dhcpcd - last connected profile is remembered and activated at startup - scan dialog link quality corrected - release dhcp address only on profile change to avoid release each time connection is disrupted - fixed settings dialog layout - fixed bug: crash on exit Version 0.3.1 ------------- - changed icons (thanks to Andrew Barr <andrew.james.barr@gmail.com>) - fixed bug: Wep key is not correctly read when non-hex - ToDo: Allo configuration of Wep Mode resticted(auth_alg SHARED) Version 0.3,0 ------------- - changed dialogs to use layout manager to properly react on resizes - added icon for weak connections (quality < 35%) - made systray icon behavior more kde standard (no show/hide menu) - made KWlan KUniqueApplication to avoid double instances - profile can be selected from the systray without opening main window Version 0.2.3 ------------- - added Sigal Quality and speed to toooltip (thanks to Valentine Sinitsyn <Valentine.Sinitsyn@usu.ru>) - made internal changes to the way systray tooltip is changed (thanks to Valentine Sinitsyn <Valentine.Sinitsyn@usu.ru>) - added IP settings dialog to allow static IP addresses per ssid Version 0.2.2 ------------- - made scan dialog modal and added "add" button - use dhcpcd if dhclient is not available Version 0.2.1 ------------- - added German translation - default startup is not minimized - added signal quality in systray tooltip - fixed bug: icon in systray not displayed

  posted 809 days ago

• kwlan 0.6.3 file released: kwlan_0.6.3-1_i386.deb

  Version 0.6.3: ------------- - Fixed Bug: Setting to show New Interface Wizard was not stored correctly. - Fixed Bug: Adding new network from Scanning didn't fill in encryption settings automatically - Fixed Bug: WPA enabled networks were shown as new if wpa_supplicant was not started - Fixed Bug: access to pppd was not tested correctly - Access Dialup networks from context menu of interface systray icon. Version 0.6.2 ------------- - Added option for ad-hoc networks - Added option to show commands in kdesu password requests - Shows signal strength in context menu - Shows unconfigured networks in context menu to automatically add them Version 0.6.1 ------------- - Kwlan main icon is only shown if no interface is monitored - Support for hidden SSIDS - ap_scan value for wpa_supplicant configurable - Only available profiles can be shown in profile selection context menu Version 0.6.0 ------------- - Use kdesu instead of su / sudo Version 0.5.9 ------------- - Fixed Bug: Disable interface did not work - dhcp client is not startet each time connection was lost - Added more granular state to interface tooltip Version 0.5.8 ------------- - Added broadcom and bsd drivers to wpa_supplicant - Added options to configure phase1 and phase2 options - Added option to prevent interfaces from being configured by Kwlan - Added option to configure custom wpa_supplicant config file Version 0.5.7 ------------- - Use only /sys/class for interface detection and statistics instead of ifconfig - start pppd in user mode instead of root mode (requires user to be in dialup group, respects linux group access rights) - Added warning if user is not in dialup group - Added documentation (at least started it...) Version 0.5.6 ------------- - Fixed Bug: Storage of encrypted networks did not work correctly Version 0.5.5 ------------- - Fixed Bug: Last Profile was not selected on startup of wpa_supplicant - Fixed Bug: KWlan tried to get an ip address on startup even if interface already had one - Fixed bug: Typo in creation of ISDN dialup networks - Fixed bug: Analog networks were not stored correcty - Added "New Interface found" wizard - Disabled encryption configuration if wpa_supplicant is not started - Tooltip for wireless interface does not show rows for data that is unavailable (like link quality or signal level, which is not shown or all network cards) - Added support for modem init string Version 0.5.4 ------------- - Dialup connections can be use without storing passwords (so One-Time-Passwords can be used) - /sys/class/net and ioctl calls are used for interface statistics to avoid ifconfig calls - interface icon shows transmit / receive status (thanks to code from knetstats) Version 0.5.3 ------------- - updated to automake 1.9 - Tooltip shows radio off for wireless interfaces that have the radio switched off - Warning messages will be generated if sudo / su is not found - More granular display of connection strength - Fixed Bug: No interfaces found if ifconfig isn't in the user's path - Fixed Bug: Menu for Settings dialog was missing Version 0.5.2 ------------- - Re-integrated interface profile configuration into the main window - Tooltips redisigned (thanks to Laurens Vanhove) Version 0.5.1 ------------- - added option to start a script before disconnect and after connect (for example to automatically start vpn connections). - added --debug parameter for debug output - changed icons Version 0.5.0 ------------- - One traywindow for the application to avoid kwlan beinig invisible if no interface is found - interfaces can be excluded from being shown in systray - Dynamic check for new interfaces Version 0.4.9 ------------- - Basic support for dialup networks - connections can be created and stored in /etc/ppp/peers/kwlan - Todo: allow detailed configuration of dialup connections like fixed ip address Version 0.4.8 ------------- - Fixed Bug: Multiple password requests on startup Version 0.4.7 ------------- - Use wpa_supplicant for scanning if started, else use iwlist Version 0.4.6 ------------- - Use one configuration file per interface to avoid mixup of profiles between interfaces - Use iwlist for network scanning Version 0.4.5 ------------- - Added basic support for unencryped networks - Added basic support for wired interfaces - Use a different wpa_supplicant config file per interface located in the user's kde config directory Version 0.4.4 ------------- - Fixed Bug: Driver is not remebered when wpa_supplicant is started at kwlan startup instead of file->start wpa_supplicant menu - Added open / shared authorisation to wep setting Version 0.4.3 ------------- - Improved support for multiple wireless cards (one systray window per card) - TODO: Make kwlan aware of insertion / removal of interface (currently interfaces are enumerated at startup) - Driver is remembered per interface Version 0.4.2 ------------- - Added basic support for multiple wireless card (only one cards's status is shown in systray) Version 0.4.1 ------------- - Event History window scrolls down automatically on new events - Changed Layout of IP settings dialog - Added checkbox to not override existing IP / DNS settings - fixed problem with dhcpd when using fixed IP addresses (symlink /etc/resolv.conf was overwritten) Version 0.4.0 ------------- - kwlan can be started as normal user, kdesud / kwlansuprocess is used to configure interface or start wpa_supplicant (thanks to Valentine Sinitsyn <Valentine.Sinitsyn@usu.ru>) - uses KMessagBox instead of QMessagebox - checks for existance of wpa_supplicant / dhclient / dhcpcd - last connected profile is remembered and activated at startup - scan dialog link quality corrected - release dhcp address only on profile change to avoid release each time connection is disrupted - fixed settings dialog layout - fixed bug: crash on exit Version 0.3.1 ------------- - changed icons (thanks to Andrew Barr <andrew.james.barr@gmail.com>) - fixed bug: Wep key is not correctly read when non-hex - ToDo: Allo configuration of Wep Mode resticted(auth_alg SHARED) Version 0.3,0 ------------- - changed dialogs to use layout manager to properly react on resizes - added icon for weak connections (quality < 35%) - made systray icon behavior more kde standard (no show/hide menu) - made KWlan KUniqueApplication to avoid double instances - profile can be selected from the systray without opening main window Version 0.2.3 ------------- - added Sigal Quality and speed to toooltip (thanks to Valentine Sinitsyn <Valentine.Sinitsyn@usu.ru>) - made internal changes to the way systray tooltip is changed (thanks to Valentine Sinitsyn <Valentine.Sinitsyn@usu.ru>) - added IP settings dialog to allow static IP addresses per ssid Version 0.2.2 ------------- - made scan dialog modal and added "add" button - use dhcpcd if dhclient is not available Version 0.2.1 ------------- - added German translation - default startup is not minimized - added signal quality in systray tooltip - fixed bug: icon in systray not displayed

  posted 809 days ago

• File released: /kwlan/0.6.3/kwlan-0.6.3.tar.bz2

  posted 809 days ago

• File released: /kwlan/0.6.3/kwlan_0.6.3-1_i386.deb

  posted 809 days ago

• kwlan 0.6.2 file released: kwlan_0.6.2-1_i386.deb

  posted 872 days ago

• kwlan 0.6.2 file released: kwlan-0.6.2.tar.bz2

  posted 872 days ago

• File released: /kwlan/0.6.2/kwlan_0.6.2-1_i386.deb

  posted 872 days ago

• File released: /kwlan/0.6.2/kwlan-0.6.2.tar.bz2

  posted 872 days ago