dimdim web meeting Files

Dimdim VMWare Appliance:


Dimdim VMWare Appliance is a VMWare based Dimdim Virtual Image containing all the required Dimdim Components.  Dimdim VMWare Appliance can
be run on any operating system 

If you need to read more about VMWare please follow the below link.
http://www.vmware.com/solutions/whitepapers/virtualization.html

Pre-requisite

Below are pre-requisites for running the Dimdim VMWare Image.

1) You need to download VMWare Player to run the Dimdim VM Image http://www.vmware.com/products/player/

2) In order to run the Dimdim VMWare Image you would need to be either on a DHCP Network so the Dimdim VMWare Image can acquire an IP Address
or you need to have a public static IP Address which can be assigned to the Dimdim VMWare Image.

3) The Dimdim VMWare Image to be downloaded is around 1GB size, you would need to download this image on the machine where you intend to run
this Dimdim VMWare Image.

	
Please follow the below steps to get your Dimdim VMWare Image up. 

1. unzip VMWare image.
2. chmod +x * (In case you are on linux)
3. Import the VMWare image to the VMWare Player.
3. Start the VMWare image from the player.
4. Please make sure your VMWare Network Settings is in Bridged mode.
5. User credentials for Dimdim Virtual machine is as follows

Username : root
Password : dimdim


Automatic Network Setup:

If your network is a DHCP Enabled Network the Dimdim VMWare Image would automatically be assigned an IP Address at the time of loading, once
the VMWare Image is loaded please login to the VMImage and follow the below steps.



      - After the VMWare image is booted, the startup scrip will configure the required details to run all the Dimdim Components and
      Start the Dimdim components automatically.

      - You can know the IP Address of the VMWare Image by typing ifconfig from the terminal.
      	Example:
      		root@localhost dimdim]# ifconfig eth0
      		
      		The output will look like:
      		eth0      Link encap:Ethernet  HWaddr 00:0C:29:CA:FA:7C
		          inet addr:192.168.1.10  Bcast:125.255.255.255  Mask:255.0.0.0
		
		The IP address for the above example is 192.168.1.10

      - You can go to this URL http://<VMWareIPAddress>/dimdim/ i.e. http://192.168.1.10/dimdim to start/join the Dimdim Web Meeting
      
      - You can go to this URL http://<VMWareIPAddress>/DimdimAdminConsole.html i.e. http://192.168.1.10/DimdimAdminConsole.html 
      to manage you Dimdim VMWare Image. You can login to this console using following credentials
      
      Username : admin
      Password : dimdim
      
      
Manual Network Setup:      
            
If the Dimdim VMWare Image do not get the IP address automatically then you need to assign an IP Address to the Dimdim VMWare Image:

   Please follow the below steps to assign a static IP Address to  your VMWare Image:

        1. Specify IP Address in ifcfg-eth0 file
        
          - Open the file by typing the below command from a terminal
        
        	root@localhost dimdim]#vi /etc/sysconfig/network-scripts/ifcfg-eth0
        
          - Modify the below parameters in the file.
        
		 DEVICE=eth0 
		 BOOTPROTO=static 
		 BROADCAST=XXX.XXX.XXX.255 
		 IPADDR=XXX.XXX.XXX.XXX 
		 NETMASK=255.255.255.0 
		 NETWORK=XXX.XXX.XXX.0 
		 ONBOOT=yes
		 
		 Please note that the hardware address should remain the same as it is for the vmware image. 
		 
	2. Specify Name Server IP Address in resolv.conf
	
	  - Open the file by typing the below command from a terminal
	
		root@localhost dimdim]#vi /etc/resolv.conf
	        
	  - Modify the below parameters in the file.
	        
   	         nameserver XXX.XXX.XXX.XXX
		 nameserver XXX.XXX.XXX.XXX

	3. vi /etc/sysconfig/network 
		NETWORKING=yes
		NETWORKING_IPV6=yes
		HOSTNAME=localhost.localdomain
		GATEWAY=XXX.XXX.XXX.1

	4. Restart the Network Service.
	
	  - Type the below command to restart the network service.
	
		root@localhost dimdim]#service network restart
	
	5. Confirm IP Address of your VMWare Image
	
	  - Type the below command to check IP Address of your VMWare Image
		
		root@localhost dimdim]#ifconfig eth0
		
	  Please ensure that you have provided the proper netmask / broadcast ip address / default gateway/ dns server address.
         
      
            
      - After assigning the IP address to the Dimdim VMWare Image you would need to do certain configuration changes,To change the 
      configuration, from the browser please go to the URL http://<VMWareIPAddress>/DimdimAdminConsole.html 
      
      You can login to this console using following credentials
            
            Username : admin
            Password : dimdim
      
      - Go to "Admin Console" page, provide the new IP Address of the VMWare Image. This IP Address will be used to configure all 
      required Dimdim Components

      - Stop the Dimdim Server : Click on "Stop Dimdim Components". This will stop all the Dimdim components. 
      
      - Start the Dimdim Server : Click on "Start Dimdim Components". This will start all the Dimdim components. 

      - Now you can goto http://<VMWareIPAddress>/dimdim/ to start the Dimdim Web Meeting.
      
          
Port Configuration: 
	If you have firewall in your network then you need to open Port 80,8088 and 1935 in order to access Dimdim from outside your network.

         
VMWare Appliance Administration:          


Dimdim Appliance Management Console:

      
Goto URL http://<VMWareIPAddress>/DimdimAdminConsole.html.You can login to this console using following credentials
            
       Username : admin
       Password : dimdim      
      
Start Dimdim Components:
      - Goto http://<VMWareIPAddress>/DimdimAdminConsole.html and click on "Start Dimdim Components". This will start all the 
      Dimdim components. 
      - Now, start the Dimdim meeting using http://<newIPAddress>/dimdim/

Stop Dimdim Components:
      - To stop Dimdim, goto http://<VMWareIPAddress>/DimdimAdminConsole.html and click on "Stop Dimdim Components". This will stop all 
      the Dimdim components.
      
Status of Dimdim Components:

      - To check the status of Dimdim Componets, goto http://<VMWareIPAddress>/DimdimAdminConsole.html and click on "Status of Dimdim Components". 
      This check status of all the Dimdim components and notify the status accordingly.
      
Change IP Address:

      - In case you have modified the IP Address of the VMWare Appliance you can change the IP Address in Dimdim Configuration files by 
      entering IP Address or Hostname in the Admin Console. Please note that you would need to stop and start the Dimdim Components 
      once you have changed the IP Address or Hostname
      

Dimdim SMTP Server Configuration :


Please note that the current smtp settings are just sample setting. It is adviced that you change these settings to your own smtp configuration. 

Below is suggested way to modify the smtp configuration

1) Open dimdim.properties configuration file

Go to folder cd /<dimdim_home>/ConferenceServer/apache-tomcat-5.5.17/webapps/dimdim/WEB-INF/classes/resources/

i.e. cd /usr/local/dimdim/ConferenceServer/apache-tomcat-5.5.17/webapps/dimdim/WEB-INF/classes/resources/


2) Modify the below settings as suggested. Please note that setting "dimdim.smtptype" needs to be configured depending on the type of smtp server.

##	Email Parameters that can be configured by the user. 
##
email.server=<gmail smtp server address>
email.user=<your gmail id>
email.password=<your gmail account password>
email.sender=<your gmail account id>
email.PORT=25
email.EMAIL_CC=
email.EMAIL_BCC=
##
##
email.PROTOCOL=smtp
email.DEBUG_MAIL_SESSION=false
email.BUFFER_SIZE=2048
email.EMAIL_SUBJECT = has invited you to a Dimdim web meeting. 
email.EMAIL_FROM_PERSON=DimDim Invitations
email.EMAIL_FROM=<your gmail account id>
email.EMAIL_REPLY_TO=<your gmail account id>
email.EMAIL_TO=
email.EMAIL_CHARSET=utf-8
##
##
##  This property refers to type of the SMTP Server
##  1 : Non SSL SMTP Server i.e. Dimdim SMTP Server
##  2 : SSL SMTP Server  i.e. gmail SMTP Server
dimdim.smtptype=2
##
##