[zd1211-devs] WL-5480USB-50 problem
Status: Beta
Brought to you by:
mayne
From: Petr M. <pe...@tp...> - 2006-05-27 15:18:26
|
I have found following problem on my Fedora Core4, Pentium III box: after installing the driver: [root@automat ~]# modprobe -v zd1211 insmod /lib/modules/2.6.11-1.1369_FC4/net/zd1211.ko [root@automat ~]# dmesg --- snip --- zd1211 - http://zd1211.ath.cx/ - r77 Based on www.zydas.com.tw driver version 2.5.0.0 usbcore: registered new driver zd1211 ================================================= then the WL-5480USB-50 (OvisLink AirLive 802.11G WLAN USB2) plugged in to the USB port and unplugged from the USB port after while. Driver sends "zd1211:zd1205: cmd = 8946" messages repeatedly to the dmesg log. It is not possible to see the WL-5480USB-50 from the other WiFi devices even all configurations commands are accepted from the command line (see bellow). ifconfig wlan0 192.168.99.1 ifconfig wlan0 up ip link set dev wlan0 up iwconfig wlan0 mode master key off essid "automat" ip link set dev wlan0 up [root@automat ~]# dmesg usb 1-2: new full speed USB device using uhci_hcd and address 7 usb 1-2: reset full speed USB device using uhci_hcd and address 7 Release Ver = 4330 zd1211:bulk out: wMaxPacketSize = 40 zd1211:bulk in: wMaxPacketSize = 40 zd1211:interrupt in: wMaxPacketSize = 40 zd1211:interrupt in: int_interval = 1 zd1211:bulk out: wMaxPacketSize = 40 EEPORM Ver = 4330 zd1211:USB Download Boot code success zd1211:MAC address = 00:4f:66:00:2d:36 zd1211:AddrEntryTable = f7d4 zd1211:RF_Mode = 00000004 PA type: 0 AiroHa AL2230RF zd1211:Pure B-Mode zd1211:AllowedChannel = 000007ff zd1211:LinkLEDn = 200 AllowedChannel = 000107ff Region:16 zd1205: (exit) zd1205_config, /usr/local/zd1211-driver-r77/src/zd1205.c line 2601 zd1205: (exit) zd1205_init, /usr/local/zd1211-driver-r77/src/zd1205.c line 8569 zd1211:zd1205: cmd = 8946 zd1211:zd1205: cmd = 8946 zd1211:zd1205: cmd = 8946 zd1211:zd1205: cmd = 8946 zd1205: (enter) zd1205_open, /usr/local/zd1211-driver-r77/src/zd1205.c line 4352zd1205: (exit) zd1205_open, /usr/local/zd1211-driver-r77/src/zd1205.c line 4435 zd1211:zd1205: cmd = 8946 zd1211:Pure B-Mode zd1211:STA_ASSOCIATED with 00:0d:0b:98:1b:d5 zd1211:zd1205: cmd = 8946 zd1211:zd1205: cmd = 8946 zd1211:zd1205: cmd = 8946 zd1211:zd1205: cmd = 8946 zd1211:zd1205: cmd = 8946 wlan0: no IPv6 routers present zd1211:zd1205: cmd = 8946 zd1211:Switch to AP mode zd1211:Pure B-Mode Mode: AP_BSS keybuf data [0]: Just Update WEP key Mode: AP_BSS zd1211:STA_DISASSOCIATED:00:4f:66:00:2d:36 zd1211:zd1205: cmd = 8946 zd1211:zd1205: cmd = 8946 zd1211:USB ST Code = -84 zd1211:USB ST Code = -84 usb 1-2: USB disconnect, address 7 zd1211:USB ST Code = -108 zd1211:USB ST Code = -84 zd1211_disconnect Beacon Interval not match zd1205: (enter) zd1205_close, /usr/local/zd1211-driver-r77/src/zd1205.c line 4895 zd1205: (exit) zd1205_close, /usr/local/zd1211-driver-r77/src/zd1205.c line 4961[root@automat ~]# [root@automat ~]# Any help will be appreciated Regards Petr -- View this message in context: http://www.nabble.com/WL-5480USB-50+problem-t1691802.html#a4591152 Sent from the zd1211-devs forum at Nabble.com. |