Menu
▾
▴
[xine-user] 2.4.17-pre2 (and 6) The failed "Read CD" packet command was
|
From: Alex R. <fo...@us...> - 2001-12-09 21:54:45
|
Just seen the attached messages while playing a VCD
with xine(0.9.5). I dont know, maybe it's not good to
play vcd, or not good to have a such cd-drive.
Could someone explain?
With linux kernel 2.4.17-pre6 it didn't produce the error
(but the stops while playing are still there). Maybe it's
just xine's problem? After all it has 8-9 threads...
xine output is attached.
vmstat reports unusual high number of context switches
(thread stop - start?)
(>1000 whereas usually 500-600) sometimes. And playback
pauses for ~1 sec. Not especially good.
first vmstat:
0 0 0 0 342976 6460 54204 0 0 0 0 154 498 0 0 100
0 0 0 0 342956 6460 54204 0 0 0 0 363 960 12 6 82
1 0 0 0 342956 6460 54204 0 0 0 0 248 776 2 1 97
0 0 0 0 342940 6460 54204 0 0 0 0 250 642 1 0 99
second one:
1 0 0 0 342948 6460 54204 0 0 0 0 176 548 0 1 99
1 0 0 0 342932 6460 54204 0 0 0 0 347 903 12 4 84
0 0 0 0 342932 6460 54204 0 0 0 0 256 779 4 0 96
0 0 0 0 342932 6460 54204 0 0 0 0 255 765 3 0 97
0 0 0 0 342932 6460 54204 0 0 0 0 256 775 4 0 96
Dec 8 16:30:15 steel kernel: The failed "Read CD" packet command was:
Dec 8 16:30:15 steel kernel: "be 00 00 05 69 f9 00 00 01 f8 00 00 "
Dec 8 16:30:15 steel kernel: hdd: packet command error: status=0x51 { DriveReady SeekComplete Error }
Dec 8 16:30:15 steel kernel: hdd: packet command error: error=0x54
Dec 8 16:30:15 steel kernel: ATAPI device hdd:
Dec 8 16:30:15 steel kernel: Error: Illegal request -- (Sense key=0x05)
Dec 8 16:30:15 steel kernel: Invalid command operation code -- (asc=0x20, ascq=0x00)
Dec 8 16:30:15 steel kernel: The failed "<NULL>" packet command was:
Dec 8 16:30:15 steel kernel: "15 10 00 00 0c 00 00 00 00 00 00 00 "
Dec 8 16:30:15 steel kernel: Error in command packet byte 0 bit 0
Linux steel 2.4.17-pre2 #12 Tue Dec 4 19:58:08 CET 2001 i686 unknown
PIII, compiled with PIII
ide-cdrom version 4.59
Model: CD-540E
/proc/ide/ide1/hdd/settings
name value min max mode
---- ----- --- --- ----
breada_readahead 4 0 127 rw
current_speed 66 0 69 rw
dsc_overlap 0 0 1 rw
file_readahead 0 0 2097151 rw
ide_scsi 0 0 1 rw
init_speed 12 0 69 rw
io_32bit 1 0 3 rw
keepsettings 0 0 1 rw
max_kb_per_request 127 1 127 rw
nice1 1 0 1 rw
number 3 0 3 rw
pio_mode write-only 0 255 w
slow 0 0 1 rw
unmaskirq 1 0 1 rw
using_dma 1 0 1 rw
/proc/ide/via
----------VIA BusMastering IDE Configuration----------------
Driver Version: 3.29
South Bridge: VIA vt82c686a
Revision: ISA 0x22 IDE 0x10
Highest DMA rate: UDMA66
BM-DMA base: 0xd800
PCI clock: 33MHz
Master Read Cycle IRDY: 0ws
Master Write Cycle IRDY: 0ws
BM IDE Status Register Read Retry: yes
Max DRDY Pulse Width: No limit
-----------------------Primary IDE-------Secondary IDE------
Read DMA FIFO flush: yes yes
End Sector FIFO flush: no no
Prefetch Buffer: yes no
Post Write Buffer: yes no
Enabled: yes yes
Simplex only: no no
Cable Type: 80w 40w
-------------------drive0----drive1----drive2----drive3-----
Transfer Mode: UDMA PIO PIO UDMA
Address Setup: 30ns 120ns 120ns 30ns
Cmd Active: 90ns 90ns 90ns 90ns
Cmd Recovery: 30ns 30ns 30ns 30ns
Data Active: 90ns 330ns 330ns 90ns
Data Recovery: 30ns 270ns 270ns 30ns
Cycle Time: 30ns 600ns 600ns 60ns
Transfer Rate: 66.0MB/s 3.3MB/s 3.3MB/s 33.0MB/s
With 2.5.1-pre7 xine cannot play that cd - unexplainable error in
"input_vcd : error in ioctl CDROMREADTOCHDR".
xine console:
audio_oss_out: audio rate : 44100 requested, 44100 provided by device/sec
audio_oss_out : 2 channels output
audio_out: output sample rate 44100
audio_out: thread created
metronom: audio pts discontinuity/start, pts is 92282282, last_pts is 92288143, wrap_offset = 64463
metronom: forcing video_wrap (58583) and audio wrap (64463) to 64463
200 frames delivered, 17 frames skipped, 9 frames discarded
200 frames delivered, 0 frames skipped, 0 frames discarded
...
200 frames delivered, 0 frames skipped, 0 frames discarded
audio_decoder: discontinuity ahead
audio_out: stopping thread...
audio_out: thread stopped, closing driver
video_decoder: discontinuity ahead
libmpeg2: blasting out backward reference frame on flush
metronom: video discontinuity
metronom: audio discontinuity
metronom: audio discontinuity => last_audio_pts=96485906, wrap_offset=64463, audio_vpts=96550369
metronom: video vpts adjusted to 96550369
metronom: video discontinuity => last_video_pts=96485906, wrap_offset=64463, video_vpts=96550369
metronom: video pts discontinuity, pts is 96500160, last_pts is 96485906, wrap_offset = 68209
200 frames delivered, 9 frames skipped, 4 frames discarded
audio_loop: using decoder >mad<
libmad: audio sample rate 44100 mode 00000008
audio_oss_out: ao_open rate=44100, mode=8
audio_oss_out: audio rate : 44100 requested, 44100 provided by device/sec
audio_oss_out : 2 channels output
audio_out: output sample rate 44100
audio_out: thread created
metronom: audio pts discontinuity/start, pts is 96485906, last_pts is 96485906, wrap_offset = 64465
metronom: forcing video_wrap (68209) and audio wrap (64465)to 68209
200 frames delivered, 0 frames skipped, 0 frames discarded
200 frames delivered, 0 frames skipped, 0 frames discarded
|