[Xbox-linux-cvs] kernel-2.6/drivers/video Kconfig, 1.23, 1.24 Makefile, 1.20, 1.21

SourceForge Headquarters 225 Broadway Suite 1600 San Diego, CA 92101 +1 (858) 454-5900

Update of /cvsroot/xbox-linux/kernel-2.6/drivers/video
In directory sc8-pr-cvs10.sourceforge.net:/tmp/cvs-serv5988/drivers/video

Modified Files:
	Kconfig Makefile 
Log Message:
Merge 2.6.21

Index: Makefile
===================================================================
RCS file: /cvsroot/xbox-linux/kernel-2.6/drivers/video/Makefile,v
retrieving revision 1.20
retrieving revision 1.21
diff -u -d -r1.20 -r1.21

--- Makefile	11 Jun 2007 05:08:52 -0000	1.20
+++ Makefile	11 Jun 2007 05:10:00 -0000	1.21
@@ -12,20 +12,19 @@
 
 obj-$(CONFIG_VT)		  += console/
 obj-$(CONFIG_LOGO)		  += logo/
-obj-$(CONFIG_SYSFS)		  += backlight/
+obj-y				  += backlight/
 
 obj-$(CONFIG_FB_CFB_FILLRECT)  += cfbfillrect.o
 obj-$(CONFIG_FB_CFB_COPYAREA)  += cfbcopyarea.o
 obj-$(CONFIG_FB_CFB_IMAGEBLIT) += cfbimgblt.o
+obj-$(CONFIG_FB_SVGALIB)       += svgalib.o
 obj-$(CONFIG_FB_MACMODES)      += macmodes.o
 obj-$(CONFIG_FB_DDC)           += fb_ddc.o
 
 # Hardware specific drivers go first
-obj-$(CONFIG_FB_RETINAZ3)         += retz3fb.o
 obj-$(CONFIG_FB_AMIGA)            += amifb.o c2p.o
 obj-$(CONFIG_FB_ARC)              += arcfb.o
 obj-$(CONFIG_FB_CLPS711X)         += clps711xfb.o
-obj-$(CONFIG_FB_CYBER)            += cyberfb.o
 obj-$(CONFIG_FB_CYBER2000)        += cyber2000fb.o
 obj-$(CONFIG_FB_PM2)              += pm2fb.o
 obj-$(CONFIG_FB_PM3)		  += pm3fb.o
@@ -44,17 +43,16 @@
 obj-$(CONFIG_FB_MBX)		  += mbx/
 obj-$(CONFIG_FB_I810)             += vgastate.o
 obj-$(CONFIG_FB_NEOMAGIC)         += neofb.o vgastate.o
-obj-$(CONFIG_FB_VIRGE)            += virgefb.o
 obj-$(CONFIG_FB_3DFX)             += tdfxfb.o
 obj-$(CONFIG_FB_CONTROL)          += controlfb.o
 obj-$(CONFIG_FB_PLATINUM)         += platinumfb.o
 obj-$(CONFIG_FB_VALKYRIE)         += valkyriefb.o
 obj-$(CONFIG_FB_CT65550)          += chipsfb.o
 obj-$(CONFIG_FB_IMSTT)            += imsttfb.o
-obj-$(CONFIG_FB_S3TRIO)           += S3triofb.o
 obj-$(CONFIG_FB_FM2)              += fm2fb.o
 obj-$(CONFIG_FB_CYBLA)            += cyblafb.o
 obj-$(CONFIG_FB_TRIDENT)          += tridentfb.o
+obj-$(CONFIG_FB_S3)               += s3fb.o vgastate.o
 obj-$(CONFIG_FB_STI)              += stifb.o
 obj-$(CONFIG_FB_FFB)              += ffb.o sbuslib.o
 obj-$(CONFIG_FB_CG6)              += cg6.o sbuslib.o
@@ -76,7 +74,6 @@
 obj-$(CONFIG_FB_HP300)            += hpfb.o
 obj-$(CONFIG_FB_G364)             += g364fb.o
 obj-$(CONFIG_FB_SA1100)           += sa1100fb.o
-obj-$(CONFIG_FB_SUN3)             += sun3fb.o
 obj-$(CONFIG_FB_HIT)              += hitfb.o
 obj-$(CONFIG_FB_EPSON1355)	  += epson1355fb.o
 obj-$(CONFIG_FB_PVR2)             += pvr2fb.o
@@ -101,6 +98,8 @@
 obj-$(CONFIG_FB_PNX4008_DUM)	  += pnx4008/
 obj-$(CONFIG_FB_PNX4008_DUM_RGB)  += pnx4008/
 obj-$(CONFIG_FB_IBM_GXT4500)	  += gxt4500.o
+obj-$(CONFIG_FB_PS3)		  += ps3fb.o
+obj-$(CONFIG_FB_SM501)            += sm501fb.o
 
 # Platform or fallback drivers go here
 obj-$(CONFIG_FB_VESA)             += vesafb.o

Index: Kconfig
===================================================================
RCS file: /cvsroot/xbox-linux/kernel-2.6/drivers/video/Kconfig,v
retrieving revision 1.23
retrieving revision 1.24
diff -u -d -r1.23 -r1.24
--- Kconfig	11 Jun 2007 05:08:52 -0000	1.23
+++ Kconfig	11 Jun 2007 05:10:00 -0000	1.24
@@ -4,20 +4,7 @@
 
 menu "Graphics support"
 
-config FIRMWARE_EDID
-       bool "Enable firmware EDID"
-       default y
-       ---help---
-         This enables access to the EDID transferred from the firmware.
-	 On the i386, this is from the Video BIOS. Enable this if DDC/I2C
-	 transfers do not work for your driver and if you are using
-	 nvidiafb, i810fb or savagefb.
-
-	 In general, choosing Y for this option is safe.  If you
-	 experience extremely long delays while booting before you get
-	 something on your display, try setting this to N.  Matrox cards in
-	 combination with certain motherboards and monitors are known to
-	 suffer from this problem.
+source "drivers/video/backlight/Kconfig"
 
 config FB
 	tristate "Support for frame buffer devices"
@@ -53,9 +40,27 @@
 	  (e.g. an accelerated X server) and that are not frame buffer
 	  device-aware may cause unexpected results. If unsure, say N.
 
+config FIRMWARE_EDID
+       bool "Enable firmware EDID"
+       depends on FB
+       default n
+       ---help---
+         This enables access to the EDID transferred from the firmware.
+	 On the i386, this is from the Video BIOS. Enable this if DDC/I2C
+	 transfers do not work for your driver and if you are using
+	 nvidiafb, i810fb or savagefb.
+
+	 In general, choosing Y for this option is safe.  If you
+	 experience extremely long delays while booting before you get
+	 something on your display, try setting this to N.  Matrox cards in
+	 combination with certain motherboards and monitors are known to
+	 suffer from this problem.
+
 config FB_DDC
        tristate
-       depends on FB && I2C && I2C_ALGOBIT
+       depends on FB
+       select I2C_ALGOBIT
+       select I2C
        default n
 
 config FB_CFB_FILLRECT
@@ -85,6 +90,14 @@
 	  blitting. This is used by drivers that don't provide their own
 	  (accelerated) version.
 
+config FB_SVGALIB
+	tristate
+	depends on FB
+	default n
+	---help---
+	  Common utility functions useful to fbdev drivers of VGA-based
+	  cards.
+
 config FB_MACMODES
        tristate
        depends on FB
@@ -126,6 +139,9 @@
 	 This is particularly important to one driver, matroxfb.  If
 	 unsure, say N.
 
+comment "Frame buffer hardware drivers"
+	depends on FB
+
 config FB_CIRRUS
 	tristate "Cirrus Logic support"
 	depends on FB && (ZORRO || PCI)
@@ -346,42 +362,6 @@
 	  and CD32. If you intend to run Linux on any of these systems, say Y;
 	  otherwise say N.
 
-config FB_CYBER
-	tristate "Amiga CyberVision 64 support"
-	depends on FB && ZORRO && BROKEN
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	help
-	  This enables support for the Cybervision 64 graphics card from
-	  Phase5. Please note that its use is not all that intuitive (i.e. if
-	  you have any questions, be sure to ask!). Say N unless you have a
-	  Cybervision 64 or plan to get one before you next recompile the
-	  kernel. Please note that this driver DOES NOT support the
-	  Cybervision 64/3D card, as they use incompatible video chips.
-
-config FB_VIRGE
-	bool "Amiga CyberVision 64/3D support "
-	depends on (FB = y) && ZORRO && BROKEN
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	help
-	  This enables support for the Cybervision 64/3D graphics card from
-	  Phase5. Please note that its use is not all that intuitive (i.e. if
-	  you have any questions, be sure to ask!). Say N unless you have a
-	  Cybervision 64/3D or plan to get one before you next recompile the
-	  kernel. Please note that this driver DOES NOT support the older
-	  Cybervision 64 card, as they use incompatible video chips.
-
-config FB_RETINAZ3
-	tristate "Amiga Retina Z3 support"
-	depends on (FB = y) && ZORRO && BROKEN
-	help
-	  This enables support for the Retina Z3 graphics card. Say N unless
-	  you have a Retina Z3 or plan to get one before you next recompile
-	  the kernel.
-
 config FB_FM2
 	bool "Amiga FrameMaster II/Rainbow II support"
 	depends on (FB = y) && ZORRO
@@ -617,10 +597,6 @@
 	  This is the amount of memory reserved for the framebuffer,
 	  which can be any value between 1MB and 8MB.
 
-config FB_SUN3
-	bool "Sun3 framebuffer support"
-	depends on (FB = y) && (SUN3 || SUN3X) && BROKEN
-
 config FB_SBUS
 	bool "SBUS and UPA framebuffers"
 	depends on (FB = y) && SPARC
@@ -629,7 +605,7 @@
 
 config FB_BW2
 	bool "BWtwo support"
-	depends on (FB = y) && (SPARC && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3)
+	depends on (FB = y) && (SPARC && FB_SBUS)
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
@@ -638,7 +614,7 @@
 
 config FB_CG3
 	bool "CGthree support"
-	depends on (FB = y) && (SPARC && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3)
+	depends on (FB = y) && (SPARC && FB_SBUS)
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
@@ -647,7 +623,7 @@
 
 config FB_CG6
 	bool "CGsix (GX,TurboGX) support"
-	depends on (FB = y) && (SPARC && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3)
+	depends on (FB = y) && (SPARC && FB_SBUS)
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
 	help
@@ -701,8 +677,7 @@
 config FB_NVIDIA
 	tristate "nVidia Framebuffer Support"
 	depends on FB && PCI
-	select I2C_ALGOBIT if FB_NVIDIA_I2C
-	select I2C if FB_NVIDIA_I2C
+	select FB_BACKLIGHT if FB_NVIDIA_BACKLIGHT
 	select FB_MODE_HELPERS
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
@@ -720,6 +695,7 @@
 config FB_NVIDIA_I2C
        bool "Enable DDC Support"
        depends on FB_NVIDIA
+       select FB_DDC
        help
 	  This enables I2C support for nVidia Chipsets.  This is used
 	  only for getting EDID information from the attached display
@@ -731,8 +707,7 @@
 
 config FB_NVIDIA_BACKLIGHT
 	bool "Support for backlight control"
-	depends on FB_NVIDIA && PMAC_BACKLIGHT
-	select FB_BACKLIGHT
+	depends on FB_NVIDIA
 	default y
 	help
 	  Say Y here if you want to control the backlight of your display.
@@ -740,9 +715,7 @@
 config FB_RIVA
 	tristate "nVidia Riva support"
 	depends on FB && PCI
-	select I2C_ALGOBIT if FB_RIVA_I2C
-	select I2C if FB_RIVA_I2C
-	select FB_DDC if FB_RIVA_I2C
+	select FB_BACKLIGHT if FB_RIVA_BACKLIGHT
 	select FB_MODE_HELPERS
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
@@ -759,6 +732,7 @@
 config FB_RIVA_I2C
        bool "Enable DDC Support"
        depends on FB_RIVA
+       select FB_DDC
        help
 	  This enables I2C support for nVidia Chipsets.  This is used
 	  only for getting EDID information from the attached display
@@ -793,8 +767,7 @@
 
 config FB_RIVA_BACKLIGHT
 	bool "Support for backlight control"
-	depends on FB_RIVA && PMAC_BACKLIGHT
-	select FB_BACKLIGHT
+	depends on FB_RIVA
 	default y
 	help
 	  Say Y here if you want to control the backlight of your display.
@@ -844,8 +817,6 @@
 config FB_I810_I2C
 	bool "Enable DDC Support"
 	depends on FB_I810 && FB_I810_GTF
-	select I2C
-	select I2C_ALGOBIT
 	select FB_DDC
 	help
 
@@ -854,8 +825,6 @@
 	depends on FB && EXPERIMENTAL && PCI && X86
 	select AGP
 	select AGP_INTEL
-	select I2C_ALGOBIT if FB_INTEL_I2C
-	select I2C if FB_INTEL_I2C
 	select FB_MODE_HELPERS
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
@@ -888,6 +857,7 @@
 config FB_INTEL_I2C
 	bool "DDC/I2C for Intel framebuffer support"
 	depends on FB_INTEL
+	select FB_DDC
 	default y
 	help
 	  Say Y here if you want DDC/I2C support for your on-board Intel graphics.
@@ -966,8 +936,8 @@
 
 config FB_MATROX_I2C
 	tristate "Matrox I2C support"
-	depends on FB_MATROX && I2C
-	select I2C_ALGOBIT
+	depends on FB_MATROX
+	select FB_DDC
 	---help---
 	  This drivers creates I2C buses which are needed for accessing the
 	  DDC (I2C) bus present on all Matroxes, an I2C bus which
@@ -1035,9 +1005,7 @@
 config FB_RADEON
 	tristate "ATI Radeon display support"
 	depends on FB && PCI
-	select I2C_ALGOBIT if FB_RADEON_I2C
-	select I2C if FB_RADEON_I2C
-	select FB_DDC if FB_RADEON_I2C
+	select FB_BACKLIGHT if FB_RADEON_BACKLIGHT
 	select FB_MODE_HELPERS
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
@@ -1061,14 +1029,14 @@
 config FB_RADEON_I2C
 	bool "DDC/I2C for ATI Radeon support"
 	depends on FB_RADEON
+	select FB_DDC
 	default y
 	help
 	  Say Y here if you want DDC/I2C support for your Radeon board. 
 
 config FB_RADEON_BACKLIGHT
 	bool "Support for backlight control"
-	depends on FB_RADEON && PMAC_BACKLIGHT
-	select FB_BACKLIGHT
+	depends on FB_RADEON
 	default y
 	help
 	  Say Y here if you want to control the backlight of your display.
@@ -1088,6 +1056,7 @@
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
+	select FB_BACKLIGHT if FB_ATY128_BACKLIGHT
 	select FB_MACMODES if PPC_PMAC
 	help
 	  This driver supports graphics boards with the ATI Rage128 chips.
@@ -1099,8 +1068,7 @@
 
 config FB_ATY128_BACKLIGHT
 	bool "Support for backlight control"
-	depends on FB_ATY128 && PMAC_BACKLIGHT
-	select FB_BACKLIGHT
+	depends on FB_ATY128
 	default y
 	help
 	  Say Y here if you want to control the backlight of your display.
@@ -1111,6 +1079,7 @@
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
+	select FB_BACKLIGHT if FB_ATY_BACKLIGHT
 	select FB_MACMODES if PPC
 	help
 	  This driver supports graphics boards with the ATI Mach64 chips.
@@ -1149,24 +1118,25 @@
 
 config FB_ATY_BACKLIGHT
 	bool "Support for backlight control"
-	depends on FB_ATY && PMAC_BACKLIGHT
-	select FB_BACKLIGHT
+	depends on FB_ATY
 	default y
 	help
 	  Say Y here if you want to control the backlight of your display.
 
-config FB_S3TRIO
-	bool "S3 Trio display support"
-	depends on (FB = y) && PPC && BROKEN
-	help
-	  If you have a S3 Trio say Y. Say N for S3 Virge.
+config FB_S3
+	tristate "S3 Trio/Virge support"
+	depends on FB && PCI
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	select FB_TILEBLITTING
+	select FB_SVGALIB
+	---help---
+	  Driver for graphics boards with S3 Trio / S3 Virge chip.
 
 config FB_SAVAGE
 	tristate "S3 Savage support"
 	depends on FB && PCI && EXPERIMENTAL
-	select I2C_ALGOBIT if FB_SAVAGE_I2C
-	select I2C if FB_SAVAGE_I2C
-	select FB_DDC if FB_SAVAGE_I2C
 	select FB_MODE_HELPERS
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
@@ -1183,6 +1153,7 @@
 config FB_SAVAGE_I2C
        bool "Enable DDC2 Support"
        depends on FB_SAVAGE
+       select FB_DDC
        help
 	  This enables I2C support for S3 Savage Chipsets.  This is used
 	  only for getting EDID information from the attached display
@@ -1363,7 +1334,7 @@
 
 config FB_AU1200
 	bool "Au1200 LCD Driver"
-	depends on FB && MIPS && SOC_AU1200
+	depends on (FB = y) && MIPS && SOC_AU1200
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
@@ -1458,8 +1429,8 @@
 	  used mainly in the MIPS-based DECstation series.
 
 config FB_PMAG_BA
-	bool "PMAG-BA TURBOchannel framebuffer support"
-	depends on (FB = y) && TC
+	tristate "PMAG-BA TURBOchannel framebuffer support"
+	depends on FB && TC
  	select FB_CFB_FILLRECT
  	select FB_CFB_COPYAREA
  	select FB_CFB_IMAGEBLIT
@@ -1468,8 +1439,8 @@
 	  used mainly in the MIPS-based DECstation series.
 
 config FB_PMAGB_B
-	bool "PMAGB-B TURBOchannel framebuffer support"
-	depends on (FB = y) && TC
+	tristate "PMAGB-B TURBOchannel framebuffer support"
+	depends on TC
  	select FB_CFB_FILLRECT
  	select FB_CFB_COPYAREA
  	select FB_CFB_IMAGEBLIT
@@ -1513,7 +1484,7 @@
 
 config FB_68328
 	bool "Motorola 68328 native frame buffer support"
-	depends on FB && (M68328 || M68EZ328 || M68VZ328)
+	depends on (FB = y) && (M68328 || M68EZ328 || M68VZ328)
  	select FB_CFB_FILLRECT
  	select FB_CFB_COPYAREA
  	select FB_CFB_IMAGEBLIT
@@ -1614,6 +1585,24 @@
 	  Turn on debugging messages. Note that you can set/unset at run time
 	  through sysfs
 
+config FB_SM501
+	tristate "Silicon Motion SM501 framebuffer support"
+	depends on FB && MFD_SM501
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	---help---
+	  Frame buffer driver for the CRT and LCD controllers in the Silicon
+	  Motion SM501.
+
+	  This driver is also available as a module ( = code which can be
+	  inserted and removed from the running kernel whenever you want). The
+	  module will be called sm501fb. If you want to compile it as a module,
+	  say M here and read <file:Documentation/modules.txt>.
+
+	  If unsure, say N.
+
+
 config FB_PNX4008_DUM
 	tristate "Display Update Module support on Philips PNX4008 board"
 	depends on FB && ARCH_PNX4008
@@ -1639,6 +1628,25 @@
 	  Say Y here to enable support for the IBM GXT4500P display
 	  adaptor, found on some IBM System P (pSeries) machines.
 
+config FB_PS3
+	bool "PS3 GPU framebuffer driver"
+	depends on (FB = y) && PS3_PS3AV
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	---help---
+	  Include support for the virtual frame buffer in the PS3 platform.
+
+config FB_PS3_DEFAULT_SIZE_M
+	int "PS3 default frame buffer size (in MiB)"
+	depends on FB_PS3
+	default 18
+	---help---
+	  This is the default size (in MiB) of the virtual frame buffer in
+	  the PS3.
+	  The default value can be overridden on the kernel command line
+	  using the "ps3fb" option (e.g. "ps3fb=9M");
+
 config FB_VIRTUAL
 	tristate "Virtual Frame Buffer support (ONLY FOR TESTING!)"
 	depends on FB
@@ -1660,6 +1668,7 @@
 	  the vfb_enable=1 option.
 
 	  If unsure, say N.
+
 if VT
 	source "drivers/video/console/Kconfig"
 endif
@@ -1668,9 +1677,5 @@
 	source "drivers/video/logo/Kconfig"
 endif
 
-if SYSFS
-	source "drivers/video/backlight/Kconfig"
-endif
-
 endmenu
 



