Menu
▾
▴
Re: [wxCode-users] Fwd: User, Pwd to upload component documentation?
|
From: cecilio <s.c...@gm...> - 2015-01-12 14:47:55
|
Thanks Ulrich. I have opened a support requets. ( https://sourceforge.net/p/forge/site-support/9430/) I'll keep you informed. Best regards, Cecilio 2015-01-11 23:28 GMT+01:00 Ulrich Telle <ulr...@gm...>: > Am 11.01.2015 22:37, schrieb cecilio: > > I use user "cecilios". But before asking SF support, could you please > check > > if user "cecilios" has the right SF permissions for project wxCode? I > think > > this can only be checked by SF wxCode project administrators. In SF > wxCode > > page, top menu, you should have an 'admin' menu item (at right left). > Click > > on it and on the resulting page, click on 'User Permissions'. You will > get > > the list of authorized users and their permissions. Please, check that I > > have the right permissions and if yes, I will proceed with SF support. > > I checked the permissions already, and I don't see anything wrong. > > The wxCode project has the default groups "Admin", "Developer" and > "Member". The id cecilios is member of the group "Developer" as most > other wxCode contributors. As far as I understood it developers should > be able to write/update the web space, although only the permission > "read" is granted to this group. There are 3 other permissions, namely > "admin", "create" and "update". Somewhere in the SF documentation it > states that "create" and "update" are only useful/relevant for admins. > > One other subdirectory of the wxCode docs web space was modified/updated > by a user having only "Developer" status, namely wxstringformatter. So, > for me this proves that "Developer" status should be sufficient to > update the wxCode web space. > > Unfortunately I have no idea why it's not working for you. > > Regards, > > Ulrich > > > > 2015-01-11 19:09 GMT+01:00 Ulrich Telle <ulr...@gm...>: > > > >> Am 11.01.2015 11:58, schrieb cecilio: > >>> The issue is that I can connect and start the sftp session, but any > sftp > >>> command fails. This is the log: > >> > >> From your log I can't see which SourceForge user ID you used to > connect. > >> > >> As mentioned the wxmidi subdirectory was created by SF user "cecilios". > >> Are you using this id to connect? If yes, you should be able to upload > >> files as "cecilios" is the owner of that directory. > >> > >> If it doesn't work even if you use the correct user id, we 'll have to > >> ask SF support as I don't see any place where I could tweak the > >> permissions to access the project's webspace for a certain user. > >> > >> Regards, > >> > >> Ulrich > >> > >>> OpenSSH_6.6.1, OpenSSL 1.0.1f 6 Jan 2014 > >>> debug1: Reading configuration data /etc/ssh/ssh_config > >>> debug1: /etc/ssh/ssh_config line 19: Applying options for * > >>> debug1: Connecting to web.sourceforge.net [216.34.181.70] port 22. > >>> debug1: Connection established. > >>> debug1: identity file /home/cecilio/.ssh/id_rsa type 1 > >>> debug1: identity file /home/cecilio/.ssh/id_rsa-cert type -1 > >>> debug1: identity file /home/cecilio/.ssh/id_dsa type -1 > >>> debug1: identity file /home/cecilio/.ssh/id_dsa-cert type -1 > >>> debug1: identity file /home/cecilio/.ssh/id_ecdsa type -1 > >>> debug1: identity file /home/cecilio/.ssh/id_ecdsa-cert type -1 > >>> debug1: identity file /home/cecilio/.ssh/id_ed25519 type -1 > >>> debug1: identity file /home/cecilio/.ssh/id_ed25519-cert type -1 > >>> debug1: Enabling compatibility mode for protocol 2.0 > >>> debug1: Local version string SSH-2.0-OpenSSH_6.6.1p1 Ubuntu-2ubuntu2 > >>> debug1: Remote protocol version 2.0, remote software version > OpenSSH_5.3 > >>> debug1: match: OpenSSH_5.3 pat OpenSSH_5* compat 0x0c000000 > >>> debug1: SSH2_MSG_KEXINIT sent > >>> debug1: SSH2_MSG_KEXINIT received > >>> debug1: kex: server->client aes128-ctr hmac-md5 none > >>> debug1: kex: client->server aes128-ctr hmac-md5 none > >>> debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<3072<8192) sent > >>> debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP > >>> debug1: SSH2_MSG_KEX_DH_GEX_INIT sent > >>> debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY > >>> debug1: Server host key: RSA > >> b0:a8:eb:30:ce:1a:0e:6a:4d:7a:6b:3a:0a:c6:27:60 > >>> debug1: Host 'web.sourceforge.net' is known and matches the RSA host > >> key. > >>> debug1: Found key in /home/cecilio/.ssh/known_hosts:1 > >>> debug1: ssh_rsa_verify: signature correct > >>> debug1: SSH2_MSG_NEWKEYS sent > >>> debug1: expecting SSH2_MSG_NEWKEYS > >>> debug1: SSH2_MSG_NEWKEYS received > >>> debug1: Roaming not allowed by server > >>> debug1: SSH2_MSG_SERVICE_REQUEST sent > >>> debug1: SSH2_MSG_SERVICE_ACCEPT received > >>> debug1: Authentications that can continue: > >>> publickey,password,keyboard-interactive > >>> debug1: Next authentication method: publickey > >>> debug1: Offering RSA public key: /home/cecilio/.ssh/id_rsa > >>> debug1: Authentications that can continue: > >>> publickey,password,keyboard-interactive > >>> debug1: Trying private key: /home/cecilio/.ssh/id_dsa > >>> debug1: Trying private key: /home/cecilio/.ssh/id_ecdsa > >>> debug1: Trying private key: /home/cecilio/.ssh/id_ed25519 > >>> debug1: Next authentication method: keyboard-interactive > >>> Password: > >>> debug1: Authentication succeeded (keyboard-interactive). > >>> Authenticated to web.sourceforge.net ([216.34.181.70]:22). > >>> debug1: channel 0: new [client-session] > >>> debug1: Requesting no-...@op... > >>> debug1: Entering interactive session. > >>> debug1: Sending environment. > >>> debug1: Sending env LC_PAPER = es_ES.UTF-8 > >>> debug1: Sending env LC_ADDRESS = es_ES.UTF-8 > >>> debug1: Sending env LC_MONETARY = es_ES.UTF-8 > >>> debug1: Sending env LC_NUMERIC = es_ES.UTF-8 > >>> debug1: Sending env LC_TELEPHONE = es_ES.UTF-8 > >>> debug1: Sending env LC_IDENTIFICATION = es_ES.UTF-8 > >>> debug1: Sending env LANG = en_US.UTF-8 > >>> debug1: Sending env LC_MEASUREMENT = es_ES.UTF-8 > >>> debug1: Sending env LC_TIME = es_ES.UTF-8 > >>> debug1: Sending env LC_NAME = es_ES.UTF-8 > >>> debug1: Sending subsystem: sftp > >>> sftp> > >> #-------------------------------------------------------------------- > >>> sftp> # upload documentation to wxCode > >>> sftp> > >> #-------------------------------------------------------------------- > >>> sftp> > >>> sftp> lcd /datos/USR/lm/projects/wxmidi/docs/html > >>> sftp> cd /home/project-web/w/wx/wxcode/htdocs/docs/wxmidi > >>> sftp> mkdir search > >>> Couldn't create directory: Permission denied > >>> debug1: client_input_channel_req: channel 0 rtype exit-status reply 0 > >>> debug1: channel 0: free: client-session, nchannels 1 > >>> debug1: fd 0 clearing O_NONBLOCK > >>> Transferred: sent 4184, received 3080 bytes, in 2.8 seconds > >>> Bytes per second: sent 1474.3, received 1085.3 > >>> debug1: Exit status 0 > >>> > >>> > >>> It fails trying to create subfolder 'search'. Here is a log just trying > >> to > >>> upload files: > >>> > >>> sftp> > >>> sftp> lcd /datos/USR/lm/projects/wxmidi/docs/html > >>> sftp> cd /home/project-web/w/wx/wxcode/htdocs/docs/wxmidi > >>> sftp> mput *.* > >>> remote > >>> > open("/home/project-web/w/wx/wxcode/htdocs/docs/wxmidi/annotated.html"): > >>> Permission denied > >>> remote > >>> open("/home/project-web/w/wx/wxcode/htdocs/docs/wxmidi/annotated.js"): > >>> Permission denied > >>> remote > open("/home/project-web/w/wx/wxcode/htdocs/docs/wxmidi/bc_s.png"): > >>> Permission denied > >>> ... > >>> > >>> > >>> There must some issue with my permissions. > >>> > >>> Any ideas? > >>> > >>> Thanks, > >>> Cecilio > >>> > >>> > >>> 2015-01-10 15:02 GMT+01:00 Ulrich Telle <ulr...@gm...>: > >>> > >>>> Am 10.01.2015 12:48, schrieb cecilio: > >>>>> I'm currently releasing a new version of my component wxMidi. I would > >>>>> like to upload the doxygen generated documentation in the wxCode > >>>>> component page. According to instructions in the template page > >>>>> (http://wxcode.sourceforge.net/template.php) I should upload it to > >>>>> /home/project-web/wxcode/htdocs/docs/ and create a subfolder named > >>>>> wxmidi. > >>>> > >>>> A subfolder wxmidi for the documentation of your component wxmidi > >>>> already exists: > >>>> > >>>> /home/project-web/w/wx/wxcode/htdocs/docs/wxmidi > >>>> > >>>> It was created by you (SourceForge user name cecilios) about 6 years > >> ago. > >>>> > >>>> As you see, the path looks a bit different. However, the path > >>>> > >>>> /home/project-web/wxcode/htdocs/docs/wxmidi > >>>> > >>>> should work, too. > >>>> > >>>>> I successfully connected to web.sourceforge.net via sftp and was > able > >>>>> to cd to /home/project-web/wxcode/htdocs/docs/, but when I try to > >>>>> create folder wxmidi or to upload any file I get "Permission denied" > >>>>> error messages. > >>>>> > >>>>> What user, password should I use?. I'm using my sourceforge user/pwd. > >>>> > >>>> Using your SourceForge user cecilios should work. > >>>> > >>>>> I also tried with my wxCode usr/pwd (by the way, the user is the > same) > >>>> > >>>> The wxcode user is only used to let you modify the description of your > >>>> component. > >>>> > >>>> Regards, > >>>> > >>>> Ulrich > > > > > ------------------------------------------------------------------------------ > Dive into the World of Parallel Programming! The Go Parallel Website, > sponsored by Intel and developed in partnership with Slashdot Media, is > your > hub for all things parallel software development, from weekly thought > leadership blogs to news, videos, case studies, tutorials and more. Take a > look and join the conversation now. http://goparallel.sourceforge.net > _______________________________________________ > wxCode-users mailing list > wxC...@li... > https://lists.sourceforge.net/lists/listinfo/wxcode-users > |