[webmin-l] Port forwarding question

[Deron K. <de...@pa...>]

Thanks for a great tool. I knew I was having too much fun!

My problem may be answered in many locations, but I've not been able to 
find it. I have webmin setup as a DHCP server with a second nic that is 
attached to the RAID card. I want to simply be able to access the web 
admin page built into the RAID remotely. The webmin server has its own 
Apache server running on port 80 and that was (and is) working, and the 
RAID card is of course serving on port 80. I think it should be easy to 
forward say port 8080 to port 80 on the raid's ip (happens to be 
192.168.2.100).

eth1 is my WAN, and eth2 is my LAN/RAID connection.

I have what I think is the correct nat prerouting entry If protocol is 
TCP and input interface is eth1 and destination port is 8080).

and filter forwarding entry (If protocol is TCP and destination is 
192.168.2.100 and input interface is eth1 and destination port is 80).

But I think the hangup is filter incoming (If protocol is TCP and input 
interface is eth1 and source and destination ports are 80) is causing me 
grief?

Any help, or correct place to read for some answers, is most appreciated!

Deron