[Wanem-support] WANem with different subnets

[Bala S. B. -X (b. - H. T. L. at Cisco) <bba...@ci...>]

Hi All,

I am using the following topology and unable to ping from router1 to server. Could someone help me on what needs to be done further to work.


Router1(20.20.20.1) --- WANem(20.20.20.10)---(20.20.20.20)Router2(9.0.0.153)----(9.0.0.1)Server

Have configured route  on Route1 --- "ip route 9.0.0.1 255.255.255.255 20.20.20.10"

Router1#ping 9.0.0.1
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 9.0.0.1, timeout is 2 seconds:
UUUUU
Success rate is 0 percent (0/5)
Router1#ping 9.0.0.153
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 9.0.0.153, timeout is 2 seconds:
.....
Success rate is 0 percent (0/5)
Router1#tra
Router1#
Router1#traceroute 9.0.0.1
Type escape sequence to abort.
Tracing the route to 9.0.0.1
VRF info: (vrf in name/id, vrf out name/id)
  1 20.20.20.10 !N  !N  !N
5915#show run | inc route
ip route 9.0.0.1 255.255.255.255 20.20.20.10
Router1#

Thanks,
Bala