[Unichrome-devel] Modeline issues w/ VIA drivers in 6.8.99

[Philip P. <phi...@re...>]

Hi.

I built and installed (as an RPM) the X server pulled from 6.8.99.

I'm seeing the following...  I've attached logs, but I'll but the 
highlights here.

Section "Monitor"
        Identifier   "Monitor0"
        VendorName   "Dell"
        ModelName    "DELL 2405FPW"
        DisplaySize  520        330
        HorizSync    30.0 - 81.0
        VertRefresh  56.0 - 76.0
        Option       "dpms"
        Modeline     "1920x1200 (Dell)" 154.0 1920 1968 2000 2080 1200 
1203 1209 1235
...
        Option       "noDDC"
EndSection

...


This is on an EPIA SP-13000 (but I have other boxes including an
MSI-7142 and an EPIA M-10000).

(II) VIA(0): Monitor0: Using hsync range of 30.00-81.00 kHz
(II) VIA(0): Monitor0: Using vrefresh range of 56.00-76.00 Hz
(II) VIA(0): Clock range:  20.00 to 230.00 MHz
(II) VIA(0): Not using mode "1920x1200 (Dell)" (no clock available for mode)
(II) VIA(0): Not using mode "1920x1200 (GTF)" (no clock available for mode)
(II) VIA(0): Not using mode "1920x1080 (GTF)" (no clock available for mode)
(II) VIA(0): Not using mode "1920x1080i (GTF)" (interlace mode not 
supported)
...
(II) VIA(0): Not using default mode "1920x1200" (no clock available for 
mode)
...
(II) VIA(0): CrtcHBlankStart out of range.
(II) VIA(0): Not using default mode "1920x1200" (horizontal timing out 
of range)
...
(II) VIA(0): Not using default mode "1920x1200" (bad mode 
clock/interlace/doublescan)
...
(II) VIA(0): Not using mode "1920x1200 (Dell)" (no mode of this name)
(II) VIA(0): Not using mode "1920x1200 (GTF)" (no mode of this name)
(II) VIA(0): Not using mode "1920x1080 (GTF)" (no mode of this name)
(II) VIA(0): Not using mode "1920x1080i (GTF)" (no mode of this name)
(II) VIA(0): Required bandwidth is not available. (499200000 > 461000000)


Can someone tell me what I'm seeing and what the workaround is?

Thanks,

-Philip